Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-22T22:09:41.207Z Has data issue: false hasContentIssue false
  • English
  • Français

Resistance to vacuum ultraviolet irradiation of nano-TiO2 modified carbon/epoxy composites

Published online by Cambridge University Press:  31 January 2011

Lixiang Jiang ,
Shiyu He  and
Dezhuang Yang
Lixiang Jiang
Affiliation:
Space Materials and Environment Engineering Lab, Harbin Institute of Technology, Harbin, 150001, People's Republic of China
Shiyu He
Affiliation:
Space Materials and Environment Engineering Lab, Harbin Institute of Technology, Harbin, 150001, People's Republic of China
Dezhuang Yang
Affiliation:
Space Materials and Environment Engineering Lab, Harbin Institute of Technology, Harbin, 150001, People's Republic of China
Get access

Abstract

Nano-TiO2 modified composites, including TiO2 + EP648 and M40/TiO2 + EP648, were fabricated, in which the nano-TiO2 particles were dispersed in an EP648 epoxy matrix using a high-speed shearing emulsification technique. A jet type of vacuum ultraviolet (VUV) source was used to simulate the VUV spectrum in space and acquire various doses of VUV irradiation. In terms of the changes in specific-area mass loss and surface morphology, the resistance to VUV irradiation of the TiO2 + EP648 and M40/TiO2 + EP648 nanocomposites was evaluated. Experimental results showed that compared to the EP648 epoxy and M40/EP648 composite, the specific-area mass loss of the TiO2 + EP648 was decreased by 44% and that of M40/TiO2 + EP648 composite by 38%, respectively. By increasing the dose of VUV irradiation, the internal layer shear strength of the M40/TiO2 + EP648 increased gradually, while that of the M40/EP648 showed a decreasing trend. After irradiation, the surface of the M40/TiO2 + EP648 changed a little, but that of the M40/EP648 was damaged severely. It was indicated by means of scanning electron microscopy and atomic force microscopy observations that the VUV damage occurred mainly in the epoxy matrix, while the carbon fibers showed good resistance to irradiation.

Type
Articles
Information
Journal of Materials Research , Volume 18 , Issue 3 , March 2003 , pp. 654 - 658
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Shalin, R.E., Minakov, V.T., and Deev, I.S., Materials in Space Environment: Proc. of the 7th Int. Symp.–Toulouse, France, edited by Guyenne, T.D. (ESA Publications Division, Noordwijk, The Netherlands, 1997), pp. 16–20.Google Scholar
2.Barbashef, E.A. and Dushic, M.I., Space Technology and Materials, edited by Okhotin, A.C., Abrashina, B.M., Borovikova, D.P., and Ivanuk, A.P. (Science Press, Moscow, U.S.S.R., 1982), pp. 78–84 (in Russian).Google Scholar
3.Grammer, H.L., Wightman, J.P., Young, P.R., and Slemp, W.S., in LDEF-69 Months In Space, NASA Conference Publication 3275 Part 2, edited by Levine, A.S. (NASA, Hampton, VA, 1995), pp. 601–612.Google Scholar
4.Jain, M., and Christman, T., Acta Metall. Mater. 42, 1901 (1994).CrossRefGoogle Scholar
5.Ng, C.B., Schadler, L.S., and Siegel, R.W., NanoStruct. Mater. 12, 507 (1999).CrossRefGoogle Scholar
6.Dong, Y., Meng, W., Wei, X., Yang, X., Lu, L., and Wang, X., Plastics Industry (in Chinese) 27, 37 (1999).Google Scholar