Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Ogasawara, Nagahisa
Chiba, Norimasa
and
Chen, Xi
2006.
Erratum: “Representative strain of indentation analysis” [J. Mater. Res. 20, 2225 (2005)] and “Limit analysis-based approach to determine the material plastic properties with conical indentation” [J. Mater. Res. 21, 947 (2006)].
Journal of Materials Research,
Vol. 21,
Issue. 10,
p.
2699.
Cao, Yanping
and
Huber, Norbert
2006.
Further investigation on the definition of the representative strain in conical indentation.
Journal of Materials Research,
Vol. 21,
Issue. 7,
p.
1810.
Zhao, Manhong
Chen, Xi
Ogasawara, Nagahisa
Razvan, Anghel Constantin
Chiba, Norimasa
Lee, Dongyun
and
Gan, Yong X.
2006.
New sharp indentation method of measuring the elastic–plastic properties of compliant and soft materials using the substrate effect.
Journal of Materials Research,
Vol. 21,
Issue. 12,
p.
3134.
Ogasawara, Nagahisa
Chiba, Norimasa
and
Chen, Xi
2006.
Measuring the plastic properties of bulk materials by single indentation test.
Scripta Materialia,
Vol. 54,
Issue. 1,
p.
65.
Ogasawara, Nagahisa
Chiba, Norimasa
and
Chen, Xi
2006.
Limit analysis-based approach to determine the material plastic properties with conical indentation.
Journal of Materials Research,
Vol. 21,
Issue. 4,
p.
947.
Ogasawara, Nagahisa
Chiba, Norimasa
Zhao, Manhong
and
Chen, Xi
2007.
Comments on “Further investigation on the definition of the representative strain in conical indentation” by Y. Cao and N. Huber [J. Mater. Res. 21, 1810 (2006)]: A systematic study on applying the representative strains to extract plastic properties through one conical indentation test.
Journal of Materials Research,
Vol. 22,
Issue. 4,
p.
858.
Guelorget, Bruno
François, Manuel
Liu, Cheng
and
Lu, Jian
2007.
Extracting the plastic properties of metal materials from microindentation tests: Experimental comparison of recently published methods.
Journal of Materials Research,
Vol. 22,
Issue. 6,
p.
1512.
Yan, J.
Karlsson, A.M.
and
Chen, X.
2007.
On internal cone cracks induced by conical indentation in brittle materials.
Engineering Fracture Mechanics,
Vol. 74,
Issue. 16,
p.
2535.
OGASAWARA, Nagahisa
CHIBA, Norimasa
ZHAO, Manhong
and
CHEN, Xi
2007.
Measuring Material Plastic Properties with Optimized Representative Strain-Based Indentation Technique.
Journal of Solid Mechanics and Materials Engineering,
Vol. 1,
Issue. 7,
p.
895.
Yan, J.
Karlsson, A.M.
and
Chen, X.
2007.
Determining plastic properties of a material with residual stress by using conical indentation.
International Journal of Solids and Structures,
Vol. 44,
Issue. 11-12,
p.
3720.
Chen, Xi
Ogasawara, Nagahisa
Zhao, Manhong
and
Chiba, Norimasa
2007.
On the uniqueness of measuring elastoplastic properties from indentation: The indistinguishable mystical materials.
Journal of the Mechanics and Physics of Solids,
Vol. 55,
Issue. 8,
p.
1618.
Bellemare, S.
Dao, M.
and
Suresh, S.
2007.
The frictional sliding response of elasto-plastic materials in contact with a conical indenter.
International Journal of Solids and Structures,
Vol. 44,
Issue. 6,
p.
1970.
Mezbahul-Islam, Mohammad
Kevorkov, Dmytro
and
Medraj, Mamoun
2008.
The equilibrium phase diagram of the magnesium–copper–yttrium system.
The Journal of Chemical Thermodynamics,
Vol. 40,
Issue. 7,
p.
1064.
Lee, Hyung-Yil
and
Lee, Jin-Haeng
2008.
Evaluation of Material Characteristics by Micro/Nano Indentation Tests.
Transactions of the Korean Society of Mechanical Engineers A,
Vol. 32,
Issue. 10,
p.
805.
Bellemare, S.C.
Dao, M.
and
Suresh, S.
2008.
Effects of mechanical properties and surface friction on elasto-plastic sliding contact.
Mechanics of Materials,
Vol. 40,
Issue. 4-5,
p.
206.
Cao, Yanping
Xue, Zhenyu
Chen, Xi
and
Raabe, Dierk
2008.
Correlation between the flow stress and the nominal indentation hardness of soft metals.
Scripta Materialia,
Vol. 59,
Issue. 5,
p.
518.
Ye, Jiping
2008.
Applied Scanning Probe Methods X.
p.
309.
Zhao, Manhong
Xiang, Yong
Xu, Jessica
Ogasawara, Nagahisa
Chiba, Norimasa
and
Chen, Xi
2008.
Determining mechanical properties of thin films from the loading curve of nanoindentation testing.
Thin Solid Films,
Vol. 516,
Issue. 21,
p.
7571.
Lee, Jung-Min
Lee, Chan-Joo
and
Kim, Byung-Min
2008.
Improvement of Dao's Reverse Analysis and Determination of Representative Strain for Extracting Elastic-Plastic Properties of Materials in Analysis of Nanoindentation.
Transactions of the Korean Society of Mechanical Engineers A,
Vol. 32,
Issue. 2,
p.
105.
Tang, Yuye
Yonezu, Akio
Ogasawara, Nagahisa
Chiba, Norimasa
and
Chen, Xi
2008.
On radial crack and half-penny crack induced by Vickers indentation.
Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences,
Vol. 464,
Issue. 2099,
p.
2967.