Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-23T16:33:22.474Z Has data issue: false hasContentIssue false

Polymer matrix templated synthesis: Cobalt ferrite nanoparticles preparation

Published online by Cambridge University Press:  31 January 2011

J. C. Hoh
Affiliation:
Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
Iskandar I. Yaacob*
Affiliation:
Department of Mechanical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur, Malaysia
*
a)Address all correspondence to this author.[email protected]
Get access

Abstract

Cobalt ferrite (CoFe2O4) nanoparticles were successfully synthesized by polymer matrix templated synthesis. Synthetic ion-exchange resins were used as hosts for the coprecipitation of cobalt ferrite where the nanopores of the resin acted as the constrained environment. The weight fraction of the particles within the resin was roughly 16%. X-ray diffraction analysis indicated that cobalt ferrite crystallites were about 1–7 nm in diameter. Magnetic properties measured using an alternating gradient magnetometer showed the particles (prepared using initial salt solution ratio of Fe3+:Co2+ of 1.5:1.0) were superparamagnetic with magnetization M (of the particle-resin system) in the range of 3.0 to 4.4 emu/g at 10 kOe of applied field. The least upper bound of the magnetic size was about 3 nm in diameter. Ratios of Fe3+ to Co2+ within the matrix of the resin before and after precipitation were investigated by x-ray fluorescence spectrometry and were found to be sensitive to the initial salt solution mixture. The ratio Fe3+:Co2+ of 1.5:1.0 was found to be a better mixture in terms of magnetization value. Spherical shape cobalt ferrite particles 2–8 nm in diameter were observed using transmission electron microscopy. The close agreement between the physical and crystallite size indicated that the particles are largely monocrystals.

Type
Articles
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Bean, C.P. and Livingston, J.D., J. Appl. Phys. 30, 120S (1959).CrossRefGoogle Scholar
2.Kittel, C., Rev. Mod. Phys. 21, 541 (1949).CrossRefGoogle Scholar
3.Kaiser, R. and Miskolczy, G., J. Appl. Phys. 41, 1064 (1970).CrossRefGoogle Scholar
4.Sharpe, P.T., Methods of Cell Separation (Elsevier, Amsterdam, The Netherlands, 1988), p. 221.Google Scholar
5.Craik, D.J., Magnetic Oxides, Part 2 (Wiley, London, U.K., 1975), p. 689.Google Scholar
6.Childress, J.R., Chien, C.L., and Nathan, M.. Appl. Phys. Lett. 56, 95 (1990).CrossRefGoogle Scholar
7.Roy, S., Roy, B., and Chakravorty, D., J. Appl. Phys. 79, 1642 (1996).CrossRefGoogle Scholar
8.Linderoth, S. and Pedersen, M.S., J. Appl. Phys. 75, 5867 (1994).CrossRefGoogle Scholar
9.Ziolo, R.F., Giannelis, E.P., Weinstein, B.A., O'Horo, M.P., Ganguly, B.N., Mehrotra, Vivek, Russell, M.W., and Huffman, D.R., Science 257, 219 (1992).CrossRefGoogle Scholar
10.Cullity, B.D., Elements of X-ray Diffraction (Addison-Wesley, Reading, MA, 1956), p. 99.Google Scholar
11.Kommareddi, N.S., Tata, M., John, V.T., McPherson, G.L., Herman, M.F., Lee, Y-S., O'Connor, C.J., Akkara, J.A., and Kaplan, D.L., Chem. Mater. 8, 801 (1996).CrossRefGoogle Scholar
12.Sato, T., Iijima, T., Seki, M., and Inagaki, N., J. Magn. Magn. Mater. 65, 252 (1987).CrossRefGoogle Scholar
13.Yaacob, I.I., Nunes, A.C., and Bose, A., J. Colloid Inter. Sci. 168, 289 (1994).CrossRefGoogle Scholar