Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-23T11:22:45.619Z Has data issue: false hasContentIssue false
  • English
  • Français

Polycrystalline Yb3+–Er3+-co-doped YAG: Fabrication, TEM-EDX characterization, spectroscopic properties, and comparison with the single crystal

Published online by Cambridge University Press:  19 August 2014

Jan Hostaša ,
Laura Esposito ,
Annie Malchère ,
Thierry Epicier ,
Angela Pirri ,
Matteo Vannini ,
Guido Toci ,
Enrico Cavalli ,
Akira Yoshikawa  and
Malgorzata Guzik
...Show all authors
Jan Hostaša*
Affiliation:
CNR ISTEC, National Research Council of Italy, Institute of Science and Technology for Ceramics, Faenza 48018, Italy; and Department of Glass and Ceramics, Institute of Chemical Technology, Prague, 166 28 Prague 6, Czech Republic
Laura Esposito
Affiliation:
CNR ISTEC, National Research Council of Italy, Institute of Science and Technology for Ceramics, Faenza 48018, Italy
Annie Malchère
Affiliation:
University of Lyon, INSA of Lyon, MATEIS UMR CNRS 5510, Villeurbanne 69621, France
Thierry Epicier
Affiliation:
University of Lyon, INSA of Lyon, MATEIS UMR CNRS 5510, Villeurbanne 69621, France
Angela Pirri
Affiliation:
CNR IFAC, National Research Council of Italy, Institute of Applied Physics “Nello Carrara”, FI 10 50019, Italy
Matteo Vannini
Affiliation:
CNR INO, National Research Council of Italy, National Institute of Optics, Sesto Fiorentino (FI) 10 50019, Italy
Guido Toci
Affiliation:
CNR INO, National Research Council of Italy, National Institute of Optics, Sesto Fiorentino (FI) 10 50019, Italy
Enrico Cavalli
Affiliation:
Dipartimento di Chimica, Università di Parma, Parma (PR) 43121, Italy
Akira Yoshikawa
Affiliation:
Advanced Crystal Engineering, IMR, Tohoku University, Sendai 980-8577, Japan
Malgorzata Guzik
Affiliation:
Faculty of Chemistry, University of Wrocław, Wrocław PL-50-383, Poland
Guillaume Alombert-Goget
Affiliation:
Institute of Light and Matter (ILM), UMR5306 CNRS-University Lyon1, University of Lyon, Villeurbanne 69622, France
Yannick Guyot
Affiliation:
Institute of Light and Matter (ILM), UMR5306 CNRS-University Lyon1, University of Lyon, Villeurbanne 69622, France
Georges Boulon
Affiliation:
Institute of Light and Matter (ILM), UMR5306 CNRS-University Lyon1, University of Lyon, Villeurbanne 69622, France
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

Yttrium aluminum garnet (YAG)-based ceramics represent a valuable alternative to single crystals as active media in laser devices for specific applications. In this connection, the 1.5–1.65 µm emission channel of Er3+-doped YAG is of particular importance for the realization of diode pumped solid state lasers operating in the so-called ‘eye-safe’ region. A well-known drawback of this material is related to its small absorption cross section in correspondence to the diode pumping radiation at 940–980 nm. However, its emission performance can be significantly improved through sensitization with Yb3+ ions that can efficiently absorb the excitation radiation and transfer it to the Er3+ ions. This work deals with the fabrication of polycrystalline YAG co-doped with Er3+ and Yb3+ ions from oxide powders via solid state sintering in high vacuum conditions and its microstructural analysis by transmission electron microscopy–energy-dispersive x-ray spectroscopy to determine the dopants distribution and to assess their influence on the sintering process and on the spectroscopic properties. For this purpose, the absorption and emission spectra of the prepared material have been measured and compared with those of a single crystal having the same composition, appositely prepared by the micro-pulling down method. Suitable calculations have been finally carried out to verify the effective perspectives of application of the investigated ceramics as active lasing medium.

Keywords

ceramicoptical propertiescrystal
Type
Articles
Information
Journal of Materials Research , Volume 29 , Issue 19: Focus Issue: Optical Ceramics Science , 14 October 2014 , pp. 2288 - 2296
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Lupei, V., Lupei, A., Gheorghe, C., and Ikesue, A.: Sensitized Yb3+ emission in (Nd, Yb):Y3Al5O12 transparent ceramics. J. Appl. Phys. 108, 123112 (2010).Google Scholar
Zhou, J., Zhang, W., Huang, T., Wang, L., Li, J., Liu, W., Jiang, B., Pan, Y., and Guo, J.: Optical properties of Er, Yb co-doped YAG transparent ceramics. Ceram. Int. 37, 513 (2011).Google Scholar
Schweizer, T., Jensen, T., Heumann, E., and Huber, G.: Spectroscopic properties and diode pumped 1.6 μm laser performance in Yb-codoped Er:Y3Al5O12 and Er:Y2SiO5. Opt. Commun. 118, 557 (1995).Google Scholar
Hinojosa, S., Meneses-Nava, M.A., Barbosa-García, O., Díaz-Torres, L.A., Santoyo, M.A., and Mosiño, J.F.: Energy back transfer, migration and energy transfer (Yb-to-Er and Er-to-Yb) processes in Yb, Er:YAG. J. Lumin. 102–103, 694 (2003).Google Scholar
Garskaite, E., Lindgren, M., Einarsrud, M-A., and Grande, T.: Luminescent properties of rare earth (Er, Yb) doped yttrium aluminium garnet thin films and bulk samples synthesised by an aqueous sol-gel technique. J. Eur. Ceram. Soc. 30, 1707 (2010).Google Scholar
Denker, B., Galagan, B., Osiko, V., Sverchkov, S., Balbashov, A., Hellström, J., Pasiskevicius, V., and Laurell, F.: Yb3+,Er3+:YAG at high temperatures: Energy transfer and spectroscopic properties. Opt. Commun. 271, 142 (2007).CrossRefGoogle Scholar
Ikesue, A., Aung, Y.L., Yoda, T., Nakayama, S., and Kamimura, T.: Fabrication and laser performance of polycrystal and single crystal Nd:YAG by advanced ceramic processing. Opt. Mater. 29, 1289 (2007).Google Scholar
Dobrzycki, Ł., Bulska, E., Pawlak, D.A., Frukacz, Z., and Woźniak, K.: Structure of YAG crystals doped/substituted with erbium and ytterbium. Inorg. Chem. 43, 7656 (2004).Google Scholar
Serantoni, M., Piancastelli, A., Costa, A.L., and Esposito, L.: Improvements in the production of Yb:YAG transparent ceramic materials: Spray drying optimisation. Opt. Mater. 34, 995 (2012).Google Scholar
Yoshikawa, A., Nikl, M., Boulon, G., and Fukuda, T.: Challenge and study for developing of novel single crystalline optical materials using micro-pulling-down method. Opt. Mater. 30, 6 (2007).Google Scholar
Hostaša, J., Esposito, L., Alderighi, D., and Pirri, A.: Preparation and characterization of Yb-doped YAG ceramics. Opt. Mater. 35, 798 (2012).Google Scholar
Cavalli, E., Esposito, L., Hostaša, J., and Pedroni, M.: Synthesis and optical spectroscopy of transparent YAG ceramics activated with Er3+. J. Eur. Ceram. Soc. 33, 1425 (2013).Google Scholar
Dolan, M.D., Harlan, B., White, J.S., Hall, M., Misture, S.T., Bancheri, S.C., and Bewlay, B.: Structures and anisotropic thermal expansion of the α, β, γ, and δ polymorphs of Y2Si2O7. Powder Diffr. 23, 20 (2008).Google Scholar
Epicier, T., Boulon, G., Zhao, W., Guzik, M., Jiang, B., Ikesue, A., and Esposito, L.: Spatial distribution of the Yb3+ rare earth ions in Y3Al5O12 and Y2O3 optical ceramics as analyzed by TEM. J. Mater. Chem. 22, 18221 (2012).Google Scholar
Epicier, T., Malchère, A., Esposito, L., Hostaša, J., Piancastelli, A., Toci, G., Vannini, M., Pirri, A., Alderighi, D., and Boulon, G.: HR-TEM study of the silicon segregation at grain boundaries in Yb3+:YAG transparent ceramics for laser applications. To be submitted.Google Scholar
Esposito, L., Epicier, T., Serantoni, M., Piancastelli, A., Alderighi, D., Pirri, A., Toci, G., Vannini, M., Anghel, S., and Boulon, G.: Integrated analysis of non-linear loss mechanisms in Yb:YAG ceramics for laser applications. J. Eur. Ceram. Soc. 32, 2273 (2012).CrossRefGoogle Scholar
Gruber, J.B., Quagliano, J.R., Reid, M.F., Richardson, F.S., Hills, M.E., Seltzer, M.D., Stevens, S.B., Morrison, C.A., and Allik, T.H.: Energy levels and correlation crystal-field effects in Er3+-doped garnets. Phys. Rev. B 48, 15561 (1993).Google Scholar
Gruber, J.B., Nijjar, A.S., Sardar, D.K., Yow, R.M., Russell, C.C., Allik, T.H., and Zandi, B.: Spectral analysis and energy-level structure of Er3+(4f11) in polycrystalline ceramic garnet Y3Al5O12. J. Appl. Phys. 97, 063519 (2005).Google Scholar
Yoshikawa, A., Boulon, G., Laversenne, L., Canibano, H., Lebbou, K., Collombet, A., Guyot, Y., and Fukuda, T.: Growth and spectroscopic analysis of Yb3+-doped Y3Al5O12 fiber single crystals. J. Appl. Phys. 94, 5479 (2003).Google Scholar
Świrkowicz, M., Skórczakowski, M., Jabczyński, J., Bajor, A., Tymicki, E., Kaczmarek, B., and Łukasiewicz, T.: Investigation of structural, optical and lasing properties of YAG: Yb single crystals. Opto-Electron. Rev. 13, 213 (2005).Google Scholar
Amami, J., Hreniak, D., Guyot, Y., Zhao, W., and Boulon, G.: Size-effect on concentration quenching in Yb3+-doped Y3A5O12 nano-crystals. J. Lumin. 130, 603 (2010).CrossRefGoogle Scholar
Zhu, H., Tang, D., Duan, Y., Luo, D., and Zhang, J.: Laser operation of diode-pumped Er,Yb codoped YAG ceramics at 1.6 μm. Opt. Express 21, 26955 (2013).Google Scholar