Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-04T21:25:52.421Z Has data issue: false hasContentIssue false
  • English
  • Français

Noble surface molecularly imprinted polymer modified titanium dioxide toward solanesol adsorption selectivity study

Published online by Cambridge University Press:  14 May 2019

Chenglong Duan ,
Zhenbin Chen ,
Xiaojiao Liu ,
Ke Li ,
Xudong Wang ,
Weiwei Jia ,
Zhenghua Tang ,
Juan M. Ruso  and
Zhen Liu Open the ORCID record for Zhen Liu [Opens in a new window]
Chenglong Duan
Affiliation:
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China; and School of Material Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
Zhenbin Chen*
Affiliation:
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China; and School of Material Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
Xiaojiao Liu
Affiliation:
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China; and School of Material Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
Ke Li
Affiliation:
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China; and School of Material Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
Xudong Wang
Affiliation:
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China; and School of Material Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
Weiwei Jia
Affiliation:
State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou University of Technology, Lanzhou 730050, China; and School of Material Science and Engineering, Lanzhou University of Technology, Lanzhou 730050, China
Zhenghua Tang
Affiliation:
Guangzhou Key Laboratory for Surface Chemistry of Energy Materials, New Energy Research Institute, School of Environment and Energy, Guangzhou Higher Education Mega Centre, South China University of Technology, Guangzhou 5100067, China; and Guangdong Provincial Key Laboratory of Atmospheric Environment and Pollution Control, Guangdong Provincial Engineering and Technology Research Center for Environmental Risk Prevention and Emergency Disposal, School of Environment and Energy, Guangzhou Higher Education Mega Centre, South China University of Technology, Guangzhou 510006, China
Juan M. Ruso
Affiliation:
Soft Matter and Molecular Biophysics Group, Department of Applied Physics, University of Santiago de Compostela, Santiago de Compostela 15782, Spain
Zhen Liu*
Affiliation:
Department of Physics and Engineering, Frostburg State University, Maryland 21532, USA
*
a)Address all correspondence to these authors. e-mail: [email protected]
b)e-mail: [email protected]
Get access

Abstract

Surface molecularly imprinted polymer of solanesol (SA-SMIP) was prepared by reversed phase suspension polymerization using modified titanium dioxide (TiO2) as carrier, and operation conditions were investigated and optimized. Structures of modified TiO2 and SA-SMIP obtained at optimal conditions were characterized by Fourier transform infrared spectrometer adopting original TiO2 and non-surface molecularly imprinted polymer as reference. The SA-SMIP synthesized under optimal conditions displayed an excellent recognition of SA from the mixture of SA and triacontanol. The maximum separation degree of SA was 2.90. Finally, the adsorption kinetics and isotherm were investigated and analyzed. Adsorption kinetics results indicated that the adsorption of SA-SMIP to SA was a pseudo-second order process, and the adsorption of beginning and later stages was controlled by homogeneous particle diffusion and adsorption reaction process, respectively. Adsorption isotherm results documented hereby were two sorts of bonding sites, complete imprinted cavities and defective imprinted cavities. The adsorption for two bonding sites could be well lined up with the Langmuir model.

Keywords

solanesolsurface molecularly imprinted polymerabsorptioncompositekinetics
Type
Invited Paper
Information
Journal of Materials Research , Volume 34 , Issue 19: Focus Issue: Thermodynamics of Complex Solids , 14 October 2019 , pp. 3271 - 3287
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Alleti, R., Vagner, J., Dehigaspitiya, D.C., Moberg, V.E., Elshan, N.G.R.D., Tafreshi, N.K., Brabez, N., Weber, C.S., Lynch, R.M., and Hruby, V.J.: Synthesis and characterization of time-resolved fluorescence probes for evaluation of competitive binding to melanocortin receptors. Bioorg. Med. Chem. 21, 5029–5038 (2013).CrossRefGoogle ScholarPubMed
Zhong, W., Wang, W., Kong, Z., Wu, B., Zhong, L., Li, X., Yu, J., and Zhang, F.: Coenzyme Q10 production directly from precursors by free and gel-entrapped Sphingomonas sp. ZUTE03 in a water-organic solvent, two-phase conversion system. Appl. Microbiol. Biotechnol. 89, 293–302 (2011).CrossRefGoogle Scholar
Yan, N., Liu, Y., Gong, D., Du, Y., Zhang, H., and Zhang, Z.: Solanesol: A review of its resources, derivatives, bioactivities, medicinal applications, and biosynthesis. Phytochem. Rev. 14, 403–417 (2015).CrossRefGoogle Scholar
Taylor, M.A. and Fraser, P.D.: Solanesol: Added value from solanaceous waste. Phytochemistry 72, 1323–1327 (2011).CrossRefGoogle ScholarPubMed
Hu, R.S., Wang, J., Li, H., Ni, H., Chen, Y.F., Zhang, Y.W., Xiang, S.P., and Li, H.H.: Simultaneous extraction of nicotine and solanesol from waste tobacco materials by the column chromatographic extraction method and their separation and purification. Sep. Purif. Technol. 146, 1–7 (2015).CrossRefGoogle Scholar
Chen, H., Liu, S., Ji, L., Wu, T., Ma, F., Ji, Y., Zhou, Y., Zheng, M., and Huang, G.: Associations between Alzheimer's disease and blood homocysteine, vitamin B12, and folate: a case-control study. Curr. Alzheimer Res. 12, 88–94 (2015).CrossRefGoogle ScholarPubMed
Zhao, C., Li, C., and Zu, Y.: Rapid and quantitative determination of solanesol in Nicotiana tabacum by liquid chromatography–tandem mass spectrometry. J. Pharm. Biomed. Anal. 44, 35–40 (2007).CrossRefGoogle ScholarPubMed
Zhao, C.J., Chun-Ying, L.I., Yu-Jie, F.U., and Yuan-Gang, Z.U.: Extraction and determination of solanesol in waste tobacco leaves by ultrasonic and HPLC. Chin. J. Appl. Chem. 22, 1265 (2005).Google Scholar
Tang, D.S., Zhang, L., Chen, H.L., Liang, Y.R., Lu, J.L., Liang, H.L., and Zheng, X.Q.: Extraction and purification of solanesol from tobacco(I). Extraction and silica gel column chromatography separation of solanesol. Sep. Purif. Technol. 56, 291–295 (2007).CrossRefGoogle Scholar
Zhao, Y. and Du, Q.: Separation of solanesol in tobacco leaves extract by slow rotary counter-current chromatography using a novel non-aqueous two-phase solvent system. J. Chromatogr. 1151, 193–196 (2007).CrossRefGoogle ScholarPubMed
Ma, X., Meng, Z., Qiu, L., Chen, J., Guo, Y., Yi, D., Ji, T., Jia, H., and Xue, M.: Solanesol extraction from tobacco leaves by flash chromatography based on molecularly imprinted polymers. J. Chromatogr. B: Anal. Technol. Biomed. Life Sci. 1020, 1–5 (2016).CrossRefGoogle ScholarPubMed
Inanan, T., Tüzmen, N., Akgöl, S., and Denizli, A.: Selective cholesterol adsorption by molecular imprinted polymeric nanospheres and application to GIMS. Int. J. Biol. Macromol. 92, 451–460 (2016).CrossRefGoogle ScholarPubMed
Yang, X., Liu, J., He, H., Zhou, L., Gong, C., Wang, X., Yang, L., Yuan, J., Huang, H., He, L., Zhang, B., and Zhuang, Z.: SiO2 nanoparticles induce cytotoxicity and protein expression alteration in HaCaT cells. Part. Fibre Toxicol. 7, 1 (2010).CrossRefGoogle ScholarPubMed
Wu, S., Yao, L., Yu, G., Guan, J., Pan, C., Yong, D., Xiang, X., and Wang, Z.: Facile preparation of dibenzoheterocycle-functional nanoporous polymeric networks with high gas uptake capacities. Macromolecules 47, 2875–2882 (2014).CrossRefGoogle Scholar
Esfandyari-Manesh, M., Javanbakht, M., Shahmoradi, E., Dinarvand, R., and Atyabi, F.: The control of morphological and size properties of carbamazepine-imprinted microspheres and nanospheres under different synthesis conditions. J. Mater. Res. 28, 2677–2686 (2013).CrossRefGoogle Scholar
Wenming, Y., Yang, C., Xiaoling, X., Zhiping, Z., Lukuan, L., and Wanzhen, X.: Preparation of indole surface molecularly imprinted polymer by atom transfer radical emulsion polymerization and its adsorption performance. J. Mater. Res. 28, 2666–2676 (2013).CrossRefGoogle Scholar
Fu, Y. and Yue, Y.: Preparation and adsorption selectivity of rutin molecularly imprinted polymers. J. Appl. Polym. Sci. 123, 903–912 (2011).CrossRefGoogle Scholar
Kim, H., Kaczmarski, K., and Guiochon, G.: Mass transfer kinetics on the heterogeneous binding sites of molecularly imprinted polymers. Chem. Eng. Sci. 60, 5425–5444 (2005).CrossRefGoogle Scholar
Mehdinia, A., Dadkhah, S., Baradaran, K.T., and Jabbari, A.: Design of a surface-immobilized 4-nitrophenol molecularly imprinted polymer via pre-grafting amino functional materials on magnetic nanoparticles. J. Chromatogr. 1364, 12–19 (2014).CrossRefGoogle ScholarPubMed
Yang, M., Zhang, Y., Lin, S., Yang, X., Fan, Z., Yang, L., and Dong, X.: Preparation of a bifunctional pyrazosulfuron-ethyl imprinted polymer with hydrophilic external layers by reversible addition-fragmentation chain transfer polymerization and its application in the sulfonylurea residue analysis. Talanta 114, 143–151 (2013).CrossRefGoogle ScholarPubMed
Li, Y., Li, X., Dong, C., Li, Y., Jin, P., and Qi, J.: Selective recognition and removal of chlorophenols from aqueous solution using molecularly imprinted polymer prepared by reversible addition-fragmentation chain transfer polymerization. Biosens. Bioelectron. 25, 306–312 (2009).CrossRefGoogle ScholarPubMed
Wang, L., Zhou, M., Jing, Z., and Zhong, A.: Selective separation of lead from aqueous solution with a novel Pb(II) surface ion-imprinted sol-gel sorbent. Microchim. Acta 165, 367–372 (2009).CrossRefGoogle Scholar
Bagheri, H., Molaei, K., Asgharinezhad, A.A., Ebrahimzadeh, H., and Shamsipur, M.: Magnetic molecularly imprinted composite for the selective solid-phase extraction of p-aminosalicylic acid followed by high performance liquid chromatography with ultraviolet detection. J. Sep. Sci. 39, 4166–4174 (2016).CrossRefGoogle ScholarPubMed
Lai, C., Wang, M.M., Zeng, G.M., Liu, Y.G., Huang, D.L., Zhang, C., Wang, R.Z., Xu, P., Cheng, M., and Huang, C.: Synthesis of surface molecular imprinted TiO2/graphene photocatalyst and its highly efficient photocatalytic degradation of target pollutant under visible light irradiation. Appl. Surf. Sci. 390, 368–376 (2016).CrossRefGoogle Scholar
Gao, R., Mu, X., Zhang, J., and Tang, Y.: Specific recognition of bovine serum albumin using superparamagnetic molecularly imprinted nanomaterials prepared by two-stage core–shell sol–gel polymerization. J. Mater. Chem. B 2, 783–792 (2014).CrossRefGoogle Scholar
Martín-Esteban, A.: Molecularly-imprinted polymers as a versatile, highly selective tool in sample preparation. TrAC, Trends Anal. Chem. 45, 169–181 (2013).CrossRefGoogle Scholar
Ertürk, G. and Mattiasson, B.: Molecular imprinting techniques used for the preparation of biosensors. Sensors 17, 288 (2017).CrossRefGoogle ScholarPubMed
Sadeghi, S., Jahani, M., and Belador, F.: The development of a new optical sensor based on the Mn doped ZnS quantum dots modified with the molecularly imprinted polymers for sensitive recognition of florfenicol. Spectrochim. Acta, Part A 159, 83–89 (2016).CrossRefGoogle ScholarPubMed
Ren, Y.M., Yang, J., Ma, W.Q., Ma, J., Feng, J., and Liu, X.L.: The selective binding character of a molecular imprinted particle for Bisphenol A from water. Water Res. 50, 90–100 (2014).CrossRefGoogle ScholarPubMed
Muddineti, O.S., Ghosh, B., and Biswas, S.: Current trends in using polymer coated gold nanoparticles for cancer therapy. Int. J. Pharm. 484, 252–267 (2015).CrossRefGoogle ScholarPubMed
Liu, J.C., Xu, M.J., Tao, L., and Li, B.: Effect of surface-modified ammonium polyphosphate with KH550 and silicon resin on the flame retardancy, water resistance, mechanical and thermal properties of intumescent flame retardant polypropylene. Ind. Eng. Chem. Res. 54, 9733–9741 (2015).CrossRefGoogle Scholar
Simonin, J.P.: On the comparison of pseudo-first order and pseudo-second order rate laws in the modeling of adsorption kinetics. Chem. Eng. J. 300, 254–263 (2016).CrossRefGoogle Scholar
Coşkun, R. and Akdeniz, S.: Functionalization of poly(ethylene terephthalate) fibers by grafting of maleic acid/methacrylamide monomer mixture. Fibers Polym. 11, 1111–1118 (2010).CrossRefGoogle Scholar
Valderrama, C., Cortina, J.L., Farran, A., Gamisans, X., and de las Heras, F.X.: Kinetic study of acid red dye removal by activated carbon and hyper-cross-linked polymeric sorbents Macronet Hypersol MN200 and MN300. React. Funct. Polym. 68, 718–731 (2008).CrossRefGoogle Scholar
Balkaya, N. and Cesur, H.: A kinetic study on cadmium adsorption from aqueous solutions by pre-conditioned phosphogypsum. Desalin. Water Treat. 57, 2515–2521 (2016).CrossRefGoogle Scholar
Yu, H., Chen, Z., Fu, Y., Kang, L., Wang, M., and Du, X.: Synthesis and optimization of molecularly imprinted polymers for quercetin. Polym. Int. 61, 1002–1009 (2012).CrossRefGoogle Scholar
Huo, T., Chen, Z., Meng, W., Long, J., Liu, X., and Du, X.: Preparation of glutathione molecularly imprinted polymer microspheres by reversed phase suspension polymerization. Polym.-Plast. Technol. Eng. 54, 889–898 (2015).CrossRefGoogle Scholar
Zhong, S., Zhou, C., Zhang, X., Zhou, H., Li, H., Zhu, X., and Wang, Y.: A novel molecularly imprinted material based on magnetic halloysite nanotubes for rapid enrichment of 2,4-dichlorophenoxyacetic acid in water. J. Hazard. Mater. 276, 58–65 (2014).CrossRefGoogle Scholar
Pan, J., Hang, Y., Wei, G., Ou, H., Huo, P., Xue, W., Zou, X., and Li, C.: Selective adsorption of 2,6-dichlorophenol by surface imprinted polymers using polyaniline/silica gel composites as functional support: Equilibrium, kinetics, thermodynamics modeling. Chem. Eng. J. 172, 847–855 (2011).CrossRefGoogle Scholar
Li, S., Huang, X., Zheng, M., Li, W., and Tong, K.: Molecularly imprinted polymers: Thermodynamic and kinetic considerations on the specific sorption and molecular recognition. Sensors 8, 2854–2864 (2008).CrossRefGoogle ScholarPubMed
Percival, C.J., Stanley, S., Braithwaite, A., Newton, M.I., and Mchale, G.: Molecular imprinted polymer coated QCM for the detection of nandrolone. Analyst 127, 1024–1026 (2002).CrossRefGoogle ScholarPubMed
Chen, T., Sun, X.G., Xiao, W., Liu, X.J., Zhang, W., Ma, K., and Zhu, Y.R.: Optimization of microwave-assisted extraction of solanesol from potato leaves and stems. Med. Chem. Res. 19, 732–742 (2010).CrossRefGoogle Scholar
Muzzarelli, R.A.A.: Chitosan composites with inorganics, morphogenetic proteins and stem cells, for bone regeneration. Carbohydr. Polym. 83, 1433–1445 (2011).CrossRefGoogle Scholar
Kabiri, K., Omidian, H., Hashemi, S.A., and Zohuriaan-Mehr, M.J.: Synthesis of fast-swelling superabsorbent hydrogels: Effect of crosslinker type and concentration on porosity and absorption rate. Eur. Polym. J. 39, 1341–1348 (2003).CrossRefGoogle Scholar
Suedee, R., Seechamnanturakit, V., Canyuk, B., Ovatlarnporn, C., and Martin, G.P.: Temperature sensitive dopamine-imprinted (N,N-methylene-bis-acrylamide cross-linked) polymer and its potential application to the selective extraction of adrenergic drugs from urine. J. Chromatogr. 1114, 239–249 (2006).CrossRefGoogle ScholarPubMed
Wang, X.L., Yuan, X.Z., Huang, H.J., Leng, L.J., Hui, L., Xin, P., Hou, W., Yan, L., and Zeng, G.M.: Study on the solubilization capacity of bio-oil in diesel by microemulsion technology with span80 as surfactant. Fuel Process. Technol. 118, 141–147 (2014).CrossRefGoogle Scholar
Wang, Y.H., Lin, J.P., He, Y.H., Lu, X., Wang, Y.L., and Chen, G.L.: Microstructure and mechanical properties of high Nb containing TiAl alloys by reactive hot pressing. J. Alloys Compd. 461, 367–372 (2008).CrossRefGoogle Scholar