Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-27T11:33:49.675Z Has data issue: false hasContentIssue false
  • English
  • Français

Nanostructured metal oxides for anodes of Li-ion rechargeable batteries

Published online by Cambridge University Press:  31 January 2011

Ming Au  and
Thad Adams
Thad Adams
Affiliation:
Savannah River National Laboratory, Aiken, South Carolina 29808
Get access

Abstract

The aligned freestanding nanorods (NR) of Co3O4 and nanoporous hollow spheres (NHS) of SnO2 and Mn2O3 were investigated as the anodes for Li-ion rechargeable batteries. The Co3O4 nanorods demonstrated 1433 mAh/g of reversible capacity initially and then decreased gradually. The NHS of SnO2 and Mn2O3 delivered energy densities as 400 and 250 mAh/g, respectively, in multiple galvonastatic discharge–charge cycles. The morphologic changes of the nanostructure anodes were investigated. It was found that Co3O4 NR broke down during cycles, but SnO2 NHS still maintained their structural integrity in multiple cycles resulting in sustainable high capacity. The nanostructured metal oxides exhibit great potential as the new anode materials for Li-ion rechargeable batteries with high energy density, low cost, and inherent safety.

Keywords

Energy storageNanostructureOxide
Type
Articles
Information
Journal of Materials Research , Volume 25 , Issue 8: Materials for Electrical Energy Storage , August 2010 , pp. 1649 - 1655
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Linden, D.Handbook of Batteries 2nd ed (McGraw-Hill 1994)Google Scholar
2.Sandu, I., Moreau, P., Guyomard, D., Brousse, T., Roue, L.Synthesis of nanosized Si particles via a mechanochemical solid–liquid reaction and application in Li-ion batteries. Solid State Ionics 178, 1297 (2007)CrossRefGoogle Scholar
3.Dimov, N., Xia, Y., Yoshio, M.Practical silicon-based composite anodes for lithium-ion batteries: Fundamental and technological features. J. Power Sources 171, 886 (2007)CrossRefGoogle Scholar
4.Hosono, E., Matsuda, H., Honma, I., Ichihara, M., Zhou, H.High-rate lithium ion batteries with flat plateau based on self-nanoporous structure of tin electrode. J. Electrochem. Soc. 154, (2)A146 (2007)CrossRefGoogle Scholar
5.Ui, K., Kikuchi, S., Kadoma, Y., Kumagai, N., Ito, S.Electrochemical haracteristics of Sn film prepared by pulse electrodeposition method as negative electrode for lithium secondary batteries. J. Power Sources 189, 224 (2009)CrossRefGoogle Scholar
6.Chan, C.K., Zhang, X.F., Cui, Y.High capacity Li ion battery anodes using Ge nanowires. Nano Lett. 8, (1)307 (2008)CrossRefGoogle ScholarPubMed
7.Lei, X., Wang, C., Yi, Z., Liang, Y., Sun, J.Effects of particle size on the electrochemical properties of aluminum powders as anode materials for lithium ion batteries. J. Alloys Compd. 429, 311 (2007)CrossRefGoogle Scholar
8.Li, N., Martin, C., Scrosati, B.Nanomaterials-based Li-ion battery electrodes. J. Power Sources 97–98, 240 (2001)CrossRefGoogle Scholar
9.Xie, J., Zhao, X.B., Yu, H.M., Qi, H., Cao, G.S., Tu, J.P.Low temperature solvethermal synthesis of nanosized NiSb as a Li-ion battery anode materials. J. Alloys Compd. 441, 231 (2007)CrossRefGoogle Scholar
10.Caballero, A., Morales, J., Sanchez, L.A simple route to high performance nanometric metallic materials for Li-ion batteries involving the use of cellulose: The case of Sb. J. Power Sources 175, 553 (2008)CrossRefGoogle Scholar
11.Chang, F.Y., McCarty, J.G.Novel oxygen storage components for advanced catalyst for emission control in natural gas fueled vehicles. Catal. Today 30, 163 (1996)CrossRefGoogle Scholar
12.Capone, S., Leo, G., Rella, R., Siciliano, P., Ortiz, A., Alonso, J.C., Pankov, V.V.Tin oxide thin films obtained from spray pyrolysis deposition for NO2 gas detectionProceedings of the 12th European Conference on Solid-State Transducers and the 9th UK Conference on Sensors and Their Applications edited by N.M. White (Istituto per lo Studio di Nuovi Materiali per l’Elettronica, Lecce, Italy 1998)Google Scholar
13.Wang, H., Liang, J., Fan, H., Xi, B., Zhang, M., Xiong, S., Zhu, Y., Qian, Y.Synthesis and gas sensitivities of SnO2 nanorods and hollow microspheres. J. Solid State Chem. 181, 122 (2008)CrossRefGoogle Scholar
14.Ren, T-Z., Tuan, Z-Y., Su, B-L.Surfactant-assisted preparation of hollow microspheres of mesoporous TiO2. Chem. Phys. Lett. 374, 170 (2003)CrossRefGoogle Scholar
15.Tang, X., Wang, Z., Zhang, C., Yang, Z., Wang, Z.Synthesis and capacitive poperty of hierarchical hollow manganese oxide nanospheres with large specific surface area. J. Power Sources 193, 939 (2009)CrossRefGoogle Scholar
16.Li, M., Lu, Q., Nuli, Y., Qian, X.Core-shell and hollow microspheres composed of tin oxide nanocrystals as anode materials for lithium-ion batteries. Eletrochem. Solid State Lett. 10, (8)K33 (2007)CrossRefGoogle Scholar
17.Li, Y., Tan, B., Wu, Y.Mesoporous Co3O4 nanowire arrays for lithium ion batteries with high capacity and rate capacity. Nano Lett. 8, (1)265 (2008)CrossRefGoogle Scholar
18.Du, F., Guo, Z., Li, G.Hydrothermal synthesis of SnO2 hollow microspheres. Mater. Lett. 59, 2563 (2005)CrossRefGoogle Scholar
19.Courtney, I.A., Dahn, J.R.Key factors controlling the reversibility of the reaction of lithium with SnO2 and Sn2BPO6 glass. J. Electrochem. Soc. 144, 2045 (1997)CrossRefGoogle Scholar
20.Courtney, I.A., Dahn, J.R.Electrochemical and in situ x-ray diffraction studies of the reaction of lithium with tin oxide composites. J. Electrochem. Soc. 144, 2943 (1997)CrossRefGoogle Scholar
21.Subramanian, V., Burke, W.W., Zhu, H., Wei, B.Novel microwave synthesis of nanocrystalline SnO2 and its electrochemical properties. J. Phys. Chem. C 112, 4550 (2008)CrossRefGoogle Scholar