Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-04T21:09:20.414Z Has data issue: false hasContentIssue false
  • English
  • Français

Line shape analysis of the Raman spectrum of diamond films grown by hot-filament and microwave-plasma chemical vapor deposition

Published online by Cambridge University Press:  31 January 2011

Lawrence H. Robins ,
Edward N. Farabaugh  and
Albert Feldman
Lawrence H. Robins
Affiliation:
Ceramics Division, Materials Science and Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899
Edward N. Farabaugh
Affiliation:
Ceramics Division, Materials Science and Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899
Albert Feldman
Affiliation:
Ceramics Division, Materials Science and Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, Maryland 20899
Get access

Abstract

Raman spectra were taken of 48 polycrystalline diamond films grown by hot-filament and microwave-plasma chemical vapor deposition (CVD), and one gem-quality diamond, and characterized by fitting the spectra to a model line shape function. The line shape function contains three components: a narrow symmetric line at ∼1333 cm−1, the Raman line of diamond; a band centered at ∼1525 cm−1 ascribed to sp2-bonded carbon; and a broad background due to photoluminescence (PL). Four spectral parameters were observed to change from one specimen to another in an interrelated manner: (1) the linewidth of the diamond Raman line, which varies from ∼3 to ∼25 cm−1; (2) the intensity in the tails of the diamond Raman line, several halfwidths away from the peak; (3) the peak intensity ratio of the sp2-bonded carbon band to the diamond Raman line, which varies from ∼0 to ∼1; and (4) the intensity ratio of the PL background to the diamond Raman peak, which varies from ∼0.03 to ∼9. We suggest that the interrelated changes in the Raman spectra are due to changes in the abundance of sp2-bonded defect structures within the diamond crystallites. Polynuclear aromatic clusters are a possible model for these defect structures. Differences in film morphology, which were observed by SEM imaging, appear to be correlated with the changes in the Raman spectra. The peak position of the diamond Raman line is shifted to higher wave number in the CVD-grown films than in the gem, by as much as 3 cm−1, but this shift is not correlated with the other changes in the Raman spectra. As a function of deposition conditions, the defect-related features of the Raman spectra generally increase with increasing methane concentration or substrate temperature, and decrease with increasing oxygen concentration. A cyclic dependence of the defect-related features on deposition time is observed for one set of films grown by hot-filament CVD.

Type
Diamond and Diamond-Like Materials
Information
Journal of Materials Research , Volume 5 , Issue 11 , November 1990 , pp. 2456 - 2468
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Spear, K. E., J. Am. Ceram. Soc. 72, 171 (1989).CrossRefGoogle Scholar
2Knight, D. S. and White, W. B., J. Mater. Res. 4, 385 (1989).CrossRefGoogle Scholar
3Robertson, J., Adv. in Phys. 35, 317 (1986).CrossRefGoogle Scholar
4Farabaugh, E. N., Feldman, A., and Robins, L. H., in Diamond Optics, edited by Feldman, A. and Holly, S. (SPIE-The International Society for Optical Engineering, Bellingham, WA, 1989), Proc. SPIE 969, 24.CrossRefGoogle Scholar
5Yoshikawa, M., Katagiri, G., Ishida, H., Ishitani, A., Ono, M., and Matsumara, K., Appl. Phys. Lett. 55, 2608 (1989).CrossRefGoogle Scholar
6Kobashi, K., Nisnimura, K., Miyata, K., Kawate, Y., Glass, J.T., and Williams, B. E., in Diamond Optics, edited by Feldman, A. and Holly, S. (SPIE-The International Society for Optical Engineering, Bellingham, WA, 1989), Proc. SPIE 969, 159.CrossRefGoogle Scholar
7Pickrell, D. J., Penn. State Univ. (private communication).Google Scholar
8Kawato, T. and Kondo, K., Jpn. J. Appl. Phys. 26, 1429 (1987).CrossRefGoogle Scholar
9Saito, Y., Sato, K., Tanaka, H., Fujita, K., and Matuda, S., J. Mater. Sci. 23, 842 (1988).CrossRefGoogle Scholar
10Watanabe, I., Hasegawa, S., and Kuráta, Y., Jpn. J. Appl. Phys. 21, 856 (1982); I. Watanabe and M. Inoue, Jpn. J. Appl. Phys. 22, L176 (1983).CrossRefGoogle Scholar
11Robins, L. H., Cook, L. P., Farabaugh, E. N., and Feldman, A., Phys. Rev. B 39, 13367 (1989).CrossRefGoogle Scholar
12Nemanich, R.J., LeGrice, Y.M., Glass, J.T., Rudder, R.A., and Markunas, R. J., SDIO/IST-ONR Diamond Technology Initiative Symposium, Crystal City, VA, 11–13 July 1989 (unpublished).Google Scholar
13Fauchet, P. M. and Campbell, I. H., CRC Crit. Rev. in Solid State and Mater. Sci. 14, S79 (1988).CrossRefGoogle Scholar
14Sato, Y. and Kamo, M., Surface and Coatings Technol. 39/40, 183 (1989).CrossRefGoogle Scholar
15Capehart, T.W., Perry, T. A., Beetz, C. B., Belton, D. N., Fisher, G. B., Beall, C. E., Yates, B. N., and Taylor, J.W., Appl. Phys. Lett. 55, 957 (1989).CrossRefGoogle Scholar