Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-23T07:05:50.964Z Has data issue: false hasContentIssue false
  • English
  • Français

Investigations on hot deformation behaviors and abnormal variation mechanisms of flow stress at elevated temperature for X45CrSi93 valve steel

Published online by Cambridge University Press:  04 May 2015

Yunsheng Wu ,
Maicang Zhang  and
Xudong Xu
Yunsheng Wu
Affiliation:
School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
Maicang Zhang*
Affiliation:
School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China
Xudong Xu
Affiliation:
MCC Capital Engineering & Research Incorporation Limited, Beijing 100176, China
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

The hot deformation behavior of X45CrSi93 valve steel was investigated by a series of compression and tensile tests by means of the Gleeble-1500 simulator and microstructural analyses. The experimental results show that the flow stress decreases with the increasing temperature between 850 and 900 °C followed by an abnormal increase with the increasing temperature between 900 and 1000 °C under the compressive conditions. A normal decrease of the flow stress is continued with the increasing temperature above 1000 °C. Meantime, the tensile specimen conducted at 1000 °C shows double necking effect. Further microstructural analyses show that the phase transition from α-ferrite to austenite and the solution strengthening caused by carbide dissolution are the main reasons for abnormal variation of flow stress for X45CrSi93. The negative temperature gradient in the tensile specimen results in the symmetrical microstructure and then the double necking phenomenon.

Keywords

steelphase transformationmicrostructure
Type
Articles
Information
Journal of Materials Research , Volume 30 , Issue 10 , 28 May 2015 , pp. 1715 - 1726
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Qin, T.Y.: Development status of property and application for engine valve steel. Shanghai Met. 02, 50 (2011).Google Scholar
Atapour, M. and Ashrafizadeh, F.: Cyclic oxidation behavior of plasma nitrided valve steel. Phys. Procedia 32, 853 (2012).CrossRefGoogle Scholar
Berns, H., Escher, C., and Streich, W.D.: Martensitic high nitrogen steel for applications at elevated temperature. Mater. Sci. Forum 318, 443 (1999).CrossRefGoogle Scholar
Grzesik, Z., Smola, G., Adamaszek, K., Jurasz, Z., and Mrowec, S.: High temperature corrosion of valve steels in combustion gases of petrol containing ethanol addition. Corros. Sci. 77, 369 (2013).CrossRefGoogle Scholar
Ramalho, A., Kapsa, P., Bouvard, G., Abry, J.C., Yoshida, T., and Charpentier, M.: Effect of temperatures up to 400 °C on the impact-sliding of valve-seat contacts. Wear 267(5), 777 (2009).CrossRefGoogle Scholar
Voorwald, H.J.C., Coisse, R.C., and Cioffi, M.O.H.: Fatigue strength of X45CrSi93 stainless steel applied as internal combustion engine valves. Procedia Eng. 10, 1256 (2011).CrossRefGoogle Scholar
Azadi, M., Roozban, M., and Mafi, A.: Failure analysis of an intake valve in a gasoline engine. J. Eng. Res. 26, 03 (2012).Google Scholar
Hu, Y., Xu, M.J., Gan, C.F., Guo, Z., and Huang, M.: Failure analysis of the fracture on valve steel X45CrSi93. CISC Technol. 51(4), 14 (2008).Google Scholar
Lin, Y.C., Chen, M.S., and Zhong, J.: Effect of temperature and strain rate on the compressive deformation behavior of 42CrMo steel. J. Mater. Process. Technol. 205(1), 308 (2008).CrossRefGoogle Scholar
Zheng, M.Y., Zhang, Z.R., Song, L.L., and Mo, D.Q.: High temperature compression behavior of 21-4N valve steel in hot-working process. Mater. Heat Treat. 02, 46 (2012).Google Scholar
Momeni, A. and Dehghani, K.: Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps. J. Mater. Process. Technol. 527(21), 5467 (2010).Google Scholar
Han, Y., Zou, D., Chen, Z., Fan, G.W., and Zhang, W.: Investigation on hot deformation behavior of 00Cr23Ni4N duplex stainless steel under medium–high strain rates. Mater. Charact. 62(2), 198 (2011).CrossRefGoogle Scholar
Farnoush, H., Momeni, A., Dehghani, K., Mohandesi, J.A., and Keshmiri, H.: Hot deformation characteristics of 2205 duplex stainless steel based on the behavior of constituent phases. Mater. Des. 31(1), 220 (2010).CrossRefGoogle Scholar
Cai, D.Y., Xiong, L.Y., Liu, W.C., Sun, G.D., and Yao, M.: Characterization of hot deformation behavior of a Ni-base superalloy using processing map. Mater. Des. 30(3), 921 (2009).CrossRefGoogle Scholar
Oh, S.I., Semiatin, S.L., and Jonas, J.J.: An analysis of the isothermal hot compression test. Metall. Trans. A 23(3), 963 (1992).CrossRefGoogle Scholar
Wu, J.: Duplex Stainless Steel (Metallurgical Industry Press, Beijing, 2000); pp. 17–18.Google Scholar
Yu, Y.N.: Fundamentals of Materials Science, 1st ed. (Higher Education Press, Beijing, 2006); pp. 387–391, 453–454.Google Scholar
Chen, G.L., Xie, X.S., and Ye, R.C.: Superalloys (Metallurgical Industry Press, Beijing, 1988); pp. 5–6.Google Scholar
Zhu, R.Z. and Lu, Y.X.: Heat-Resistant Steel and Superalloy (Chemical Industry Press, Beijing, 1995); pp. 151.Google Scholar
Chiba, A. and Kim, M.S.: Suzuki segregation and dislocation locking in supersaturated Co-Ni-based alloy. Mater. Trans. 42(10), 2112 (2001).CrossRefGoogle Scholar