Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-26T03:12:16.376Z Has data issue: false hasContentIssue false
  • English
  • Français

A facile preparation of epoxy-polydimethylsiloxane (EP-PDMS) polymer coatings for marine applications

Published online by Cambridge University Press:  30 August 2019

Shatakshi Verma ,
Sonalee Das ,
Smita Mohanty  and
Sanjay Kumar Nayak
Shatakshi Verma*
Affiliation:
Department of Plastic Technology, Central Institute of Plastics Engineering and Technology (CIPET), Chennai, Tamil Nadu 600 032, India
Sonalee Das
Affiliation:
Research and Development, Laboratory for Advanced Research in Polymeric Materials (LARPM), Bhubaneswar, Odisha 751024, India
Smita Mohanty
Affiliation:
Department of Plastic Technology, Central Institute of Plastics Engineering and Technology (CIPET), Chennai, Tamil Nadu 600 032, India; and Research and Development, Laboratory for Advanced Research in Polymeric Materials (LARPM), Bhubaneswar, Odisha 751024, India
Sanjay Kumar Nayak
Affiliation:
Department of Plastic Technology, Central Institute of Plastics Engineering and Technology (CIPET), Chennai, Tamil Nadu 600 032, India; and Research and Development, Laboratory for Advanced Research in Polymeric Materials (LARPM), Bhubaneswar, Odisha 751024, India
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

Chemically modified polymer coatings have been synthesized using a blend of soft polymeric material polydimethylsiloxane (h-PDMS) incorporated with stiff polymer epoxy resin (EP) and was cross-linked using silane compatibilizer 3-aminopropyltriethoxysilane (APTES). A comparative analysis has been carried out between neat epoxy coating (N-EP) and epoxy–hydroxy-terminated polydimethylsiloxane (EP-hPD) blends to study the influence of blending ratio on various properties to cater marine applications. An increase of 144.4% in the Young’s modulus (E) and 37.5% increment in adhesion strength at 30 wt% h-PDMS content was observed as compared with N-EP. The water contact angle results demonstrated a substantial increase in contact angle from 52.3° to 90.1° at 30 wt% h-PDMS content as compared to N-EP. Taber abrasion results revealed a decrease in weight loss (mg/1000 cycles) by 24.1 and 17.7% at 10 and 30 wt% loading of h-PDMS in comparison to N-EP. The surface roughness of N-EP and 30 wt% EP-hPD blend were found to be 33.4 nm and 41.4 nm, respectively. To determine the applicability of the developed blend coatings obligatory tests such as field immersion study and chemical resistance evaluation were conducted, and optimum performance was manifested by EP-hPD blend at an EP:h-PDMS ratio of 70:30.

Keywords

adhesioncoatingmorphology
Type
Article
Information
Journal of Materials Research , Volume 34 , Issue 16 , 28 August 2019 , pp. 2881 - 2894
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Díaz, I., Chico, B., De La Fuente, D., Simancas, J., Vega, J.M., and Morcillo, M.: Corrosion resistance of new epoxy-siloxane hybrid coatings. A laboratory study. Prog. Org. Coat. 69, 278 (2010).CrossRefGoogle Scholar
Ammar, S., Ramesh, K., Vengadaesvaran, B., Ramesh, S., and Arof, A.K.: Amelioration of anticorrosion and hydrophobic properties of epoxy/PDMS composite coatings containing nano ZnO particles. Prog. Org. Coat. 92, 54 (2016).CrossRefGoogle Scholar
Petrie, E.M.: Handbook of Adhesives and Sealants (McGraw-Hill Publishing, Pennsylvania Plaza, New York, 2000).Google Scholar
Chambers, L.D., Wharton, J.A., Wood, R.J.K., Walsh, F.C., and Stokes, K.R.: Techniques for the measurement of natural product incorporation into an antifouling coating. Prog. Org. Coat. 77, 473 (2014).CrossRefGoogle Scholar
Esfandeh, M., Mirabedini, S.M., Pazokifard, S., and Tari, M.: Study of silicone coating adhesion to an epoxy undercoat using silane compounds. Effect of silane type and application method. Colloids Surf., A 302, 11 (2007).CrossRefGoogle Scholar
Zhou, C., Li, R., Luo, W., Chen, Y., Zou, H., Liang, M., and Li, Y.: The preparation and properties study of polydimethylsiloxane-based coatings modified by epoxy resin. J. Polym. Res. 23, 1 (2016).CrossRefGoogle Scholar
Wang, J., Lv, C., Li, Z., and Zheng, J.: Facile preparation of polydimethylsiloxane elastomer with self-healing property and remoldability based on Diels–Alder chemistry. Macromol. Mater. Eng. 303, 1 (2018).CrossRefGoogle Scholar
Zhang, G., Liang, B., Zhong, Z., Huang, Y., and Su, Z.: One-step solvent-free strategy for covalently attached, substrate-independent transparent slippery coating. Adv. Mater. Interfaces 5, 1 (2018).CrossRefGoogle Scholar
Longenberger, T.B., Ryan, K.M., Bender, W.Y., Krumpfer, A.K., and Krumpfer, J.W.: The art of silicones: Bringing siloxane chemistry to the undergraduate curriculum. J. Chem. Educ. 94, 1682 (2017).CrossRefGoogle Scholar
Sobhani, S., Jannesari, A., and Bastani, S.: Effect of molecular weight and content of PDMS on morphology and properties of silicone-modified epoxy resin. J. Appl. Polym. Sci. 123, 162 (2011).CrossRefGoogle Scholar
Roy, P.K., Iqbal, N., Kumar, D., and Rajagopal, C.: Polysiloxane-based core–shell microspheres for toughening of epoxy resins. J. Polym. Res. 21, 1 (2014).CrossRefGoogle Scholar
Jia, L.Y., Zhang, C., Du, Z.J., Li, C.J., and Li, H.Q.: Preparation of interpenetrating polymer networks of epoxy/polydimethylsiloxane in a common solvent of the precursors. Polym. J. 39, 593 (2007).CrossRefGoogle Scholar
Nurioglu, A.G., Catarina, A., Esteves, C., and de With, G.: Nontoxic, non-biocide-release antifouling coatings based on molecular structure design for marine applications. J. Mater. Chem. B 3, 6547 (2015).CrossRefGoogle Scholar
Sung, P-H. and Wu, S-Y.: Polysiloxane modified epoxy networks (III) strain-induced crystallization of jointed interpenetrating polymer networks in fracture mode. Polymer 39, 7033 (1998).CrossRefGoogle Scholar
Verma, S., Mohanty, S., and Nayak, S.K.: A review on protective polymeric coatings for marine applications. J. Coat. Technol. Res. 16, 307 (2019).CrossRefGoogle Scholar
Kumar, S.A., Balakrishnan, T., Alagar, M., and Denchev, Z.: Development and characterization of silicone/phosphorus modified epoxy materials and their application as anticorrosion and antifouling coatings. Prog. Org. Coat. 55, 207 (2006).CrossRefGoogle Scholar
Prolongo, S.G., Cabanelas, J.C., and Baselga, J.: Reactive compatibilization of epoxy/polyorganosiloxane blends. Macromol. Symp. 198, 283 (2003).CrossRefGoogle Scholar
Markovic, G. and Visakh, P.M.: Polymer blends: State of art. In Recent Developments in Polymer Macro, Micro and Nano Blends, P.M. Visakh, G. Markovic, and D. Pasquin, eds. (Woodhead Publishing, Sawston, Cambridge, England, U.K., 2017); pp. 1–15.Google Scholar
Alagar, M., Thanikai Velan, T.V., Ashok Kumar, A., and Mohan, V.: Synthesis and characterization of high performance polymeric hybrid siliconized epoxy composites for aerospace applications. Mater. Manuf. Processes 14, 67 (1999).CrossRefGoogle Scholar
Huszank, R., Bonyár, A., Kámán, J., and Furu, E.: Wide range control in the elastic properties of PDMS polymer by ion beam (H+) irradiation. Polym. Degrad. Stab. 152, 253 (2018).CrossRefGoogle Scholar
Singh, A.K., Panda, B.P., Mohanty, S., Nayak, S.K., and Gupta, M.K.: Synergistic effect of hybrid graphene and boron nitride on the cure kinetics and thermal conductivity of epoxy adhesives. Polym. Adv. Technol. 28, 1851 (2017).CrossRefGoogle Scholar
Duraibabu, D., Ganeshbabu, T., Manjumeena, R., Ananda Kumar, S., and Dasan, P.: Unique coating formulation for corrosion and microbial prevention of mild steel. Prog. Org. Coat. 77, 657 (2014).CrossRefGoogle Scholar
Xu, F., Wang, C., Li, D., Wang, M., Xu, F., and Deng, X.: Preparation of modified epoxy–SiO2 hybrid materials and their application in the stone protection. Prog. Org. Coat. 81, 58 (2015).CrossRefGoogle Scholar
Halvey, A.K., Macdonald, B., Dhyani, A., and Tuteja, A.: Design of surfaces for controlling hard and soft fouling. Philos. Trans. R. Soc., A 377, 1 (2018).Google Scholar
Fu, Y., Cui, J., Huang, Q., Lu, L., Pan, C., and Yu, G.: Click-based transparent durable films derived from tetrabrachius PDMS-bridged epoxy acrylates and surface modified nanosilica particles. Prog. Org. Coat. 117, 166 (2018).CrossRefGoogle Scholar
Arukalam, I.O., Oguzie, E.E., and Li, Y.: Fabrication of FDTS-modified PDMS-ZnO nanocomposite hydrophobic coating with anti-fouling capability for corrosion protection of Q235 steel. J. Colloid Interface Sci. 484, 220 (2016).CrossRefGoogle ScholarPubMed
Zhang, J., Pan, M., Luo, C., Chen, X., Kong, J., and Zhou, T.: A novel composite paint (TiO2/fluorinated acrylic nanocomposite) for antifouling application in marine environments. J. Environ. Chem. Eng. 4, 2545 (2016).CrossRefGoogle Scholar
Romo-Uribe, A., Santiago-Santiago, K., Reyes-Mayer, A., and Aguilar-Franco, M.: Functional PDMS enhanced strain at fracture and toughness of DGEBA epoxy resin. Eur. Polym. J. 89, 101 (2017).CrossRefGoogle Scholar
Robeson, L.M.: Fundamentals of polymer blends. In Polymer Blends: A Comprehensive Review (Carl Hanser Verlag GmbH & Co., Munich, 2007); pp. 11–23, ISBN-10: 3-446-22569-2.CrossRefGoogle Scholar
Ratna, D. and Simon, G.P.: Mechanical characterization and morphology of carboxyl randomized poly(2-ethyl hexyl acrylate) liquid rubber toughened epoxy resins. Polymer 42, 7739 (2001).CrossRefGoogle Scholar
Ananda Kumar, S. and Sankara Narayanan, T.S.N.: Thermal properties of siliconized epoxy interpenetrating coatings. Prog. Org. Coat. 45, 323 (2002).CrossRefGoogle Scholar
Camino, G., Tartaglione, G., Frache, A., Manferti, C., and Costa, G.: Thermal and combustion behaviour of layered silicate–epoxy nanocomposites. Polym. Degrad. Stab. 90, 354 (2005).CrossRefGoogle Scholar
Ma, Y., He, L., Jia, M., Zhao, L., Zuo, Y., and Hu, P.: Cage and linear structured polysiloxane/epoxy hybrids for coatings: Surface property and film permeability. J. Colloid Interface Sci. 500, 349 (2017).CrossRefGoogle ScholarPubMed
Barati Darband, G., Aliofkhazraei, M., Khorsand, S., Sokhanvar, S., and Kaboli, A.: Science and engineering of superhydrophobic surfaces: Review of corrosion resistance, chemical and mechanical stability. Arabian J. Chem. (2018). Available online February 17, 2018 (in press). doi: 10.1016/j.arabjc.2018.01.013.CrossRefGoogle Scholar
Hsissou, R., Benzidia, B., Hajjaji, N., and Elharfi, A.: Elaboration and electrochemical studies of the coating behavior of a new pentafunctional epoxy polymer (pentaglycidyl ether pentabisphenol phosphorous) on E24 carbon steel in 3.5% NaCl. J. Chem. Technol. Metall. 53, 898 (2018).Google Scholar
Liu, M., Qi, Y., Shen, Y., and Li, H.: Study on properties of epoxy resin and polyurethane modified with organic silicon. J. Chem. 1, 200 (2018).Google Scholar
Bartlett, M.D., Croll, A.B., King, D.R., Paret, B.M., Irschick, D.J., and Crosby, A.J.: Looking beyond fibrillar features to scale gecko-like adhesion. Adv. Mater. 24, 1078 (2012).CrossRefGoogle ScholarPubMed
He, D., Cheng, G., Tang, L., Chen, L., Li, S., Gu, P., and Zhao, Y.: Research on adhesive properties of polydimethylsiloxane-carbon fiber composite material. Int. J. Adhes. Adhes. 86, 35 (2018).CrossRefGoogle Scholar
Kohl, J.G., Malicky, D.M., and Jones, A.M.: Adhesion of epoxy (pseudobarnacles) to glass that has been treated with hydrophobic carbosilane-based coatings. Prog. Org. Coat. 107, 1 (2017).CrossRefGoogle Scholar
Saravanan, P., Jayamoorthy, K., and Ananda Kumar, S.: Design and characterization of non-toxic nano-hybrid coatings for corrosion and fouling resistance. J. Sci. 1, 367 (2016).Google Scholar
Li, P., Cai, C., Long, Y., Zhu, T., Dong, H., Zhu, C., Zhao, N., and Xu, J.: Cu2O-clay composites with sub-micrometer-sized Cu2O particles for marine antifouling paints. J. Coat. Technol. Res. 16, 26 (2019).CrossRefGoogle Scholar
Gomathi Sankar, G., Sathya, S., Sriyutha Murthy, P., Das, A., Pandiyan, R., Venugopalan, V.P., and Doble, M.: Polydimethyl siloxane nanocomposites: Their antifouling efficacy in vitro and in marine conditions. Int. Biodeterior. Biodegrad. 104, 307 (2015).CrossRefGoogle Scholar
Momber, A.W. and Greverath, W.D.: Surface preparation standards for steel substrates—A critical review. J. Prot. Coat. Linings 9, 48 (2004).Google Scholar
Sakami, S.: The use of zinc dust paints in shipbuilding as a prefabrication primer. Anti-Corros. Methods Mater. 16, 13 (1969).CrossRefGoogle Scholar
Su, M., Liu, Y., Zhang, Y., Wang, Z., Li, Y., and He, P.: Robust and underwater superoleophobic coating with excellent corrosion and biofouling resistance in harsh environments. Appl. Surf. Sci. 436, 152 (2018).CrossRefGoogle Scholar
Pradhan, S., Pandey, P., Mohanty, S., and Nayak, S.K.: Synthesis and characterization of waterborne epoxy derived from epoxidized soybean oil and bioderived C-36 dicarboxylic acid. J. Coat. Technol. Res. 14, 915 (2017).CrossRefGoogle Scholar
Supplementary material: File

Verma et al. supplementary material

Table S1 and Figures S1-S3

Download Verma et al. supplementary material(File)
File 2.5 MB