Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-26T15:17:47.471Z Has data issue: false hasContentIssue false
  • English
  • Français

Evaluating indent pile-up with metallic films on ceramic-like substrates

Published online by Cambridge University Press:  23 June 2015

MariAnne Sullivan  and
Barton C. Prorok
MariAnne Sullivan
Affiliation:
Department of Mechanical Engineering, Auburn University, Auburn, Alabama 36849, USA
Barton C. Prorok*
Affiliation:
Department of Mechanical Engineering, Auburn University, Auburn, Alabama 36849, USA
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

This work focused on ascertaining the effect of pile-up during indentation of thin films on substrates. Conventional understanding has postulated that differences in contact area resulting from pile-up or sink-in significantly alter the extraction of material properties. In this work, the specific case of pile-up with compliant, plastically deforming films on stiff, nonplastically deforming substrates was studied. Several literature methods to assess pile-up were leveraged, and a new technique was developed and validated to quantify projected pile-up. Indentation testing was performed on gold films of multiple thicknesses on several ceramic-based substrates. The results indicated that the degree of pile-up was solely a function of indent depth into the film. Pile-up was not influenced by film thickness or substrate elastic modulus. In other words, the pile-up development was insensitive to the presence of the substrate and how it contributes to the composite's elastic properties. In such case, if the elastic response of the film/substrate composite was independent of the degree of pile-up, then elastic data acquired from unloading did not require a contact area correction. The findings are confirmed using the Zhou–Prorok model for extracting film elastic properties for both gold and platinum films.

Type
Articles
Information
Journal of Materials Research , Volume 30 , Issue 13 , 14 July 2015 , pp. 2046 - 2054
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Oliver, W.C. and Pharr, G.M.: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).CrossRefGoogle Scholar
Oliver, W.C. and Pharr, G.M.: Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. J. Mater. Res. 19, 3 (2004).CrossRefGoogle Scholar
Li, X. and Bhushan, B.: A review of nanoindentation continuous stiffness measurement technique and its applications. Mater. Charact. 48, 11 (2002).CrossRefGoogle Scholar
Doerner, M.F. and Nix, W.D.: A method for interpreting the data from depth-sensing indentation instruments. J. Mater. Res. 1, 601 (1986).CrossRefGoogle Scholar
King, R.B.: Elastic analysis of some punch problems for a layered medium. Int. J. Solids Struct. 23, 1657 (1987).CrossRefGoogle Scholar
Saha, R. and Nix, W.D.: Effects of the substrate on the determination of thin film mechanical properties by nanoindentation. Acta Mater. 50, 23 (2002).CrossRefGoogle Scholar
Gao, H., Chiu, C-H., and Lee, J.: Elastic contact versus indentation modeling of multi-layered materials. Int. J. Solids Struct. 29, 2471 (1992).Google Scholar
Hay, J. and Crawford, B.: Measuring substrate-independent modulus of thin films. J. Mater. Res. 26, 727 (2011).CrossRefGoogle Scholar
Pharr, G.M.: Measurement of mechanical properties by ultra-low load indentation. Mater. Sci. Eng., A 253, 151 (1998).CrossRefGoogle Scholar
Zhou, B. and Prorok, B.: A discontinuous elastic interface transfer model of thin film nanoindentation. Exp. Mech. 50, 793 (2010).CrossRefGoogle Scholar
Zhou, B. and Prorok, B.C.: A new paradigm in thin film nanoindentation. J. Mater. Res. 25, 1671–1678 (2010).CrossRefGoogle Scholar
Nix, W.D.: Elastic and plastic properties of thin films on substrates: Nanoindentation techniques. Mater. Sci. Eng., A 234–236, 37–44 (1997).CrossRefGoogle Scholar
Chen, X. and Vlassak, J.J.: Numerical study of the measurement of thin film mechanical properties by means of nanoindentation. J. Mater. Res. 16, 2974–2982 (2001).CrossRefGoogle Scholar
McElhaney, K.W., Vlassak, J.J., and Nix, W.D.: Determination of indenter tip geometry and indentation contact area for depth-sensing indentation experiments. J. Mater. Res. 13, 1300–1306 (1998).CrossRefGoogle Scholar
Bolshakov, A. and Pharr, G.M.: Influences of pileup on the measurement of mechanical properties by load and depth sensing indentation techniques. J. Mater. Res. 13, 1049–1058 (1998).CrossRefGoogle Scholar
Taljat, B. and Pharr, G.M.: Development of pile-up during spherical indentation of elastic–plastic solids. Int. J. Solids Struct. 41, 3891–3904 (2004).CrossRefGoogle Scholar
Callister, W.D. Jr. and Rethwisch, D.G.: Fundamentals of Materials Science and Engineering: An Integrated Approach, Vol. 3. (John Wiley & Sons, Hoboken, NJ, 2008).Google Scholar
Boch, P., Glandus, J.C., Jarrige, J., Lecompte, J.P., and Mexmain, J.: Sintering, oxidation and mechanical properties of hot pressed aluminum nitride. Ceram. Int. 8, 34–40 (1982).CrossRefGoogle Scholar
Gupta, R.R. and Lechner, M.D.: Landolt-Bonstein-Group III Condensed Matter (Springer, New York, 2005).Google Scholar
Liang, C. and Prorok, B.C.: Measuring the thin film elastic modulus with a magnetostrictive sensor. J. Micromech. Microeng. 17, 709 (2007).CrossRefGoogle Scholar
Wang, L., Liang, C., and Prorok, B.C.: A comparison of testing methods in assessing the elastic properties of sputter-deposited gold films. Thin Solid Films 515, 7911 (2007).CrossRefGoogle Scholar
Wang, L. and Prorok, B.C.: Characterization of the strain rate dependent behavior of nanocrystalline gold films. J. Mater. Res. 23, 55 (2008).CrossRefGoogle Scholar
Wang, L. and Prorok, B.C.: Inverstigation of the influence of grain size, texture, and orientation on the mechanical behavior of freestanding polycrystalline gold films. MRS Proc. 924, Z03–13 (2006).CrossRefGoogle Scholar
Schneider, C.A., Rasband, W.S., and Eliceiri, K.W.: NIH image to ImageJ: 25 years of image analysis. Nat. Methods 9, 671 (2012).CrossRefGoogle ScholarPubMed
Espinosa, H.D. and Prorok, B.C.: Size effects on the mechanical behavior of gold thin films. J. Mater. Sci. 38, 4125 (2003).CrossRefGoogle Scholar
Espinosa, H.D., Prorok, B.C., and Fischer, M.: A methodology for determining mechanical properties of freestanding thin films and MEMS materials. J. Mech. Phys. Solids 51, 47 (2003).CrossRefGoogle Scholar
Espinosa, H.D., Prorok, B.C., and Peng, B.: Plasticity size effects in free-standing submicron polycrystalline FCC films subjected to pure tension. J. Mech. Phys. Solids 52, 667 (2004).CrossRefGoogle Scholar
Prorok, B.C. and Espinosa, H.D.: Effects of nanometer-thick passivation layers on the mechanical response of thin gold films. J. Nanosci. Nanotechnol. 2, 427 (2002).CrossRefGoogle ScholarPubMed
Kese, K. and Li, Z.C.: Semi-ellipse method for accounting for the pile-up contact area during nanoindentation with the Berkovich indenter. Scr. Mater. 55, 699 (2006).CrossRefGoogle Scholar
Kese, K.O., Li, Z.C., and Bergman, B.: Method to account for true contact area in soda-lime glass during nanoindentation with the Berkovich tip. Mater. Sci. Eng., A 404, 1 (2005).CrossRefGoogle Scholar
Tsui, T.Y., Oliver, W.C., and Pharr, G.M.: Influences of stress on the measurement of mechanical properties using nanoindentation: Part I. Experimental studies in an aluminum alloy. J. Mater. Res. 11, 752 (1996).CrossRefGoogle Scholar
Bolshakov, A., Oliver, W.C., and Pharr, G.M.: Influences of stress on the measurement of mechanical properties using nanoindentation: Part II. Finite element simulations. J. Mater. Res. 11, 760 (1996).CrossRefGoogle Scholar