Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-20T00:30:56.645Z Has data issue: false hasContentIssue false
  • English
  • Français

Erratum: “Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate” [J. Mater. Res. 21, 783 (2006)]

Published online by Cambridge University Press:  31 January 2011

S. Math ,
V. Jayaram  and
S.K. Biswas
S. Math
Affiliation:
Department of Mechanical Engineering, Indian Institute of Science, Bangalore–560012, India
V. Jayaram*
Affiliation:
Department of Materials Engineering, Indian Institute of Science, Bangalore–560012, India
S.K. Biswas
Affiliation:
Department of Mechanical Engineering, Indian Institute of Science, Bangalore–560012, India
*
a)Address all correspondence to this author. e-mail: [email protected]

Abstract

An abstract is not available for this content. As you have access to this content, full HTML content is provided on this page. A PDF of this content is also available in through the ‘Save PDF’ action button.
Type
Errata
Information
Journal of Materials Research , Volume 23 , Issue 4 , April 2008 , pp. 1185
Copyright
Copyright © Materials Research Society 2008

With reference to the above mentioned article [J. Mater Res. 21, 783 (2006)], we would like to correct two equations and a reference:

  1. In the subsection “Criterion for inclined crack initiation” under the section “Analysis”(page 785, column 2, line 15), the corrected equation should be read as:

The square root in the term (2/πl)1/2 is missing in the current article.

  1. In the subsection “Criterion for bending crack” (page 786, column 1, line 12), the corrected equation should be read as:

The square root is missing in the term (2/πl)1/2, as in the earlier case.

  1. The reference numbered 12 should be corrected as

D.J. Green: An Introduction to the Mechanical Properties of Ceramics (Cambridge University Press, Cambridge, UK, 1998), p. 241.