Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-05T09:17:54.424Z Has data issue: false hasContentIssue false

Equal channel angular pressing with rotating shear plane to produce hybrid materials with helical architecture of constituents

Published online by Cambridge University Press:  11 September 2017

Rimma Lapovok*
Affiliation:
Institute for Frontier Materials, Deakin University, Waurn Ponds, Victoria 3216, Australia
Andrey Molotnikov
Affiliation:
Department of Materials Science and Engineering, Monash University, Clayton, Victoria 3800, Australia
Alexander Medvedev
Affiliation:
Institute for Frontier Materials, Deakin University, Waurn Ponds, Victoria 3216, Australia
Yuri Estrin
Affiliation:
Department of Materials Science and Engineering, Monash University, Clayton, Victoria 3800, Australia; and Laboratory of Hybrid Nanostructured Materials, National University of Science and Technology “MISIS”, Moscow 119049, Russia
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

A modification of the metal processing technique known as equal channel angular pressing (ECAP) to incorporate shear plane rotation, called ECAP-R, is presented. The new process was developed to produce hybrid materials with helical architecture of their constituents, which holds promise to enable enhanced mechanical properties. The process was trialled experimentally using a specially designed laboratory-scale rig. It was shown that a positive mean stress (negative hydrostatic pressure) in a part of the multipiece billet leads to separation of the constituents within that region. A way to improving the process design was suggested based on finite element simulations. It was demonstrated that the proposed processing results in excellent bonding between the helical parts of the hybrid in the regions of positive hydrostatic pressure. Subsequent annealing gave rise to further improvement of the quality of bonding. Processing by ECAP-R at elevated temperatures was suggested as a viable method of producing hybrid materials with helical architecture.

Type
Articles
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Contributing Editor: Mathias Göken

References

REFERENCES

Ashby, M.F.: Hybrids to fill holes in material property space. Philos. Mag. 85, 3235 (2005).Google Scholar
Ashby, M.F. and Bréchet, Y.J.M.: Designing hybrid materials. Acta Mater. 51(19), 5801 (2003).CrossRefGoogle Scholar
Bouaziz, O., Brechet, Y., and Embury, J.D.: Heterogeneous and architectured materials: A possible strategy for design of structural materials. Adv. Eng. Mater. 10, 21 (2008).Google Scholar
Embury, J.D. and Bouaziz, O.: Steel-based composites. Annu. Rev. Mater. Res. 40, 213 (2010).Google Scholar
Bouaziz, O., Kim, H.S., and Estrin, Y.: Architecturing of metal-based composites with concurrent nanostructuring: A new paradigm of materials design. Adv. Eng. Mater. 15, 336 (2013).Google Scholar
Valiev, R.Z., Zehetbauer, M.J., Estrin, Y., Hoppel, H.W., Ivanisenko, Y., Hahn, H., Wilde, G., Roven, H.J., Sauvage, X., and Langdon, T.G.: The innovation potential of bulk nanostructured materials. Adv. Eng. Mater. 9(7), 527 (2007).Google Scholar
Valiev, R.Z., Estrin, Y., Horita, Z., Langdon, T.G., Zechetbauer, M.J., and Zhu, Y.T.: Producing bulk ultrafine-grained materials by severe plastic deformation. JOM 58, 33 (2006).Google Scholar
Bachmaier, A. and Pippan, R.: Generation of metallic nanocomposites by severe plastic deformation. Int. Mater. Rev. 58(1), 41 (2013).Google Scholar
Raabe, D., Choi, P-P., Li, Y., Kostka, A., Sauvage, X., Lecouturier, F., Hono, K., Kirchheim, R., Pippan, R., and Embury, D.: Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials. MRS Bull. 35, 982 (2010).Google Scholar
Lapovok, R., Qi, Y., Ng, H.P., Maier, V., and Estrin, Y.: Multicomponent materials from machining chips compacted by equal-channel angular pressing. J. Mater. Sci. 49(3), 1193 (2014).CrossRefGoogle Scholar
Beygelzimer, Y., Estrin, Y., and Kulagin, R.: Synthesis of hybrid materials by severe plastic deformation: A new paradigm of SPD processing. Adv. Eng. Mater. 17, 1853 (2015).Google Scholar
Wainright, S.A., Biggs, W.D., Currey, J.D., and Gosline, J.M.: Mechanical Design in Organisms (Edward Arnold Publishers, London, 1976).Google Scholar
Fengel, D. and Wegener, G.: Wood-Chemistry (De Gruyter, Berlin, 1984).Google Scholar
Zhang, T., Ma, Y., Chen, K., Kunz, M., Tamura, N., Qiang, M., Xu, J., and Qi, L.: Structure and mechanical: Properties of a pteropod shell consisting of interlocked helical aragonite nanofibers. Angew. Chem., Int. Ed. 50(44), 10361 (2011).Google Scholar
Bouaziz, O., Allain, S., Barcelo, D., and Niang, R.: Strengthening by plastic corrugated reinforcements: An effective way for strain-hardening improvement by architecture. In Architectured Multifunctional Materials, Brechet, Y.J.M., Embury, J.D., and Onck, P.R., eds. (Materials Research Society Symposia Proceedings 1188, San Francisco, USA, 2009), pp. 111115.Google Scholar
Khoddam, S., Estrin, Y., Kim, H.S., and Bouaziz, O.: Torsional and compressive behaviours of a hybrid material: Spiral fibre reinforced metal matrix composite. Mater. Des. 85, 404 (2015).Google Scholar
Latypov, M.I., Beygelzimer, Y., Kulagin, R., Varyukhin, V., and Kim, H.S.: Toward architecturing of metal composites by twist extrusion. Mater. Res. Lett. 3, 161 (2015).Google Scholar
Beygelzimer, Y., Kulagin, R., and Estrin, Y.: Severe plastic deformation as a way to produce architectured materials. In Architectured Materials, Estrin, Y., Dunlop, J., Brechet, Y., Fratzl, P., Dendievel, R., eds. (Springer, Heidelberg, Germany). (in press).Google Scholar
Lapovok, R.: The role of back-pressure in equal channel angular extrusion. J. Mater. Sci. 40(2), 341 (2005).Google Scholar
Blau, P.J.: Friction Science and Technology: From Concepts to Applications (CRC Press, Boca Raton, Florida, 2008).Google Scholar
Hug, E. and Bellido, N.: Brittleness study of intermetallic (Cu, Al) layers in copper-clad aluminium thin wires. J. Mater. Sci. Eng. A 528, 7103 (2011).Google Scholar