Hostname: page-component-cd9895bd7-q99xh Total loading time: 0 Render date: 2024-12-23T12:17:00.621Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrical conductivity changes in bulk Sn, and eutectic Sn-Ag in bulk and in joints, from aging and thermal shock

Published online by Cambridge University Press:  03 March 2011

F. Guo ,
J.G. Lee ,
T. Hogan  and
K.N. Subramanian
F. Guo
Affiliation:
Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, Michigan 48824-1226
J.G. Lee
Affiliation:
Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, Michigan 48824-1226
T. Hogan
Affiliation:
Electrical and Computer Engineering Department, Michigan State University, East Lansing, Michigan 48824-1226
K.N. Subramanian*
Affiliation:
Department of Chemical Engineering and Materials Science, Michigan State University, East Lansing, Michigan 48824-1226
*
a) Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

Electrical conductivity of electronic interconnects made with Sn-based solders undergo a significant amount of deterioration during service. Several factors, such as anisotropy of Sn, coefficient of thermal expansion mismatches between the entities that make up the joint, and growth of intermetallic compounds present within the solder and solder/substrate interface, may contribute to the damage accumulation during thermal excursions and cause deterioration of properties. This study dealing with effects of aging and thermal shock on electrical conductivity, carried out with bulk Sn, and eutectic Sn–Ag in bulk and joint configurations, is aimed at evaluating the roles of the above factors on the deterioration of electrical conductivity from these thermal excursions.

Keywords

Electronic materialElectronic propertiesJoining
Type
Articles
Information
Journal of Materials Research , Volume 20 , Issue 2 , February 2005 , pp. 364 - 374
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Wu, C.M.L. and Huang, M.L.: Creep behavior of eutectic Sn–Cu lead-free solder alloy. J. Electron. Mater. 31, 442 (2002).CrossRefGoogle Scholar
2.Frear, D.R., Jang, J.W., Lin, J.K. and Zhang, C.: Pb-free solders for flip-chip interconnects. JOM 53, 28 (2001).CrossRefGoogle Scholar
3.Kang, S.K. and Ference, T.G.: Nickel-alloyed tin-lead eutectic solder for surface mount technology. J. Mater. Res. 8, 1033 (1993).CrossRefGoogle Scholar
4.Takao, H. and Hasegawa, H.: Influence of alloy composition on fillet-lifting phenomenon in tin binary alloys. J. Electron. Mater. 30, 1060 (2001).CrossRefGoogle Scholar
5.Oh, C.S., Shim, J.H., Lee, B.J., Lee, D.N.: A thermodynamic study on the Ag-Sb-Sn system. J. Alloys Compd. 238, 155 (1996).CrossRefGoogle Scholar
6.Hong, S.M., Park, J.Y., Kang, C.S. and Jung, J.P.: Fluxless wetting properties of UBM-coated Si-wafer to Sn-3.5wt%Ag solder. IEEE. T. Compon. Pack. T. 26, 255 (2003).CrossRefGoogle Scholar
7.Nishiura, M., Nakayama, A., Sakatani, S., Kohara, Y., Uenishi, K. and Kobayashi, K.F.: Mechanical strength and microstructure of BGA joints using lead-free solders. Mater. Trans. 43, 1802 (2002).CrossRefGoogle Scholar
8.Fujiwara, Y., Enomoto, H., Nagao, T. and Hoshika, H.: Composite plating of Sn–Ag alloys for Pb-free soldering. Surf. Coat. Technol. 169, 100 (2003).CrossRefGoogle Scholar
9.Subramanian, K.N. and Lee, J.G.: Physical metallurgy in lead-free electronic solder development. JOM 55, 26 (2003).CrossRefGoogle Scholar
10.Lee, H.T., Chen, M.H., Jao, H.M. and Liao, T.L.: Influence of interfacial intermetallic compound on fracture behavior of solder joints. Mater. Sci. Eng. A-Struct. 358, 134 (2003).CrossRefGoogle Scholar
11.Ma, X., Wang, F.J., Qian, Y.Y. and Yoshida, F.: Development of Cu-Sn intermetallic compound at Pb-free solder/Cu joint interface. Mater. Lett. 57, 361 (2003).CrossRefGoogle Scholar
12.Jeon, Y.D., Nieland, S., Ostmann, A., Reichl, H. and Paik, K.W.: A study on interfacial reactions between electroless Ni-P under bump metallization and 95.5Sn-4.0Ag-0.5Cu alloy. J. Electron. Mater. 32, 548 (2003).CrossRefGoogle Scholar
13.Yu, C.H., Kim, K.S., Sun, Y.B., Kim, N.K., Kim, N.H., Oh, H.S. and Chang, E.G.: Shear strength in solder bump joints for high reliability photodiode packages. Mater. Trans. 43, 3234 (2002).CrossRefGoogle Scholar
14.Chan, Y.C., Fan, S.H. and Lai, J.K.L.: Open defects in PBGA assembly solder joints. J. Electron. Packaging 125, 153 (2003).CrossRefGoogle Scholar
15.Kim, K.S., Huh, S.H. and Suganuma, K.: Effects of fourth alloying additive on microstructures and tensile properties of Sn-Ag-Cu alloy and joints with Cu. Microelectron. Reliab. 43, 259 (2003).CrossRefGoogle Scholar
16.Wu, C.M.L., Yu, D.Q., Law, C.M.L. and Wang, L.: Improvements of microstructure, wettability, tensile and creep strength of eutectic Sn-Ag alloy by doping with rare-earth elements. J. Mater. Res. 17, 3146 (2002).CrossRefGoogle Scholar
17.Dittes, M. and Walter, H.: Advanced alloy for lead-free solder balls. Solder. Surf. Mt. Tech. 15, 50 (2003).CrossRefGoogle Scholar
18.Choi, J.W., Cha, H.S. and Oh, T.S.: Mechanical properties and shear strength of Sn-3.5Ag-Bi solder alloys. Mater. Trans. 43, 1864 (2002).CrossRefGoogle Scholar
19.Kanchanomai, C., Miyashita, Y., Mutoh, Y. and Mannan, S.L.: Influence of frequency on low cycle fatigue behavior of Pb-free solder 96.5Sn-3.5Ag. Mater. Sci. Eng. A-Struct. 345, 90 (2003).CrossRefGoogle Scholar
20.Lau, J., Mei, Z., Pang, S., Amsden, C., Rayner, J. and Pan, S.: Creep analysis and thermal-fatigue life prediction of the lead-free solder sealing ring of a photonic switch. J. Electron. Packaging 124, 403 (2002).CrossRefGoogle Scholar
21.Ahat, S., Huang, W.D., Mei, S. and Le, L.: Joint shape, microstructure, and shear strength of lead-free solder joints with different component terminations. J. Electron. Mater. 31, 136 (2002).CrossRefGoogle Scholar
22.Wu, K.P., Wade, N., Cui, J. and Miyahara, K.: Microstructural effect on the creep strength of a Sn-3.5%Ag solder alloy. J. Electron. Mater. 32, 5 (2003).CrossRefGoogle Scholar
23.McCabe, R.J. and Fine, M.E.: High creep resistance tin-based alloys for soldering applications. J. Electron. Mater. 31, 1276 (2002).CrossRefGoogle Scholar
24.Huh, S.H., Kim, K.S. and Suganuma, K.: Effect of Ag addition on the microstructural and mechanical properties of Sn-Cu eutectic solder. Mater. Trans. 42, 739 (2001).CrossRefGoogle Scholar
25.Sasaki, K., Yanagimoto, A. and Ishikawa, H.: Viscoplastic deformation of lead-free solder alloy—experiments and simulations. Key. Eng. Mater. 233, 779 (2003).CrossRefGoogle Scholar
26.Takao, H. and Hasegawa, H.: Influence of alloy composition on fillet-lifting phenomenon in tin binary alloys. J. Electron. Mater. 30, 1060 (2001).CrossRefGoogle Scholar
27.Xia, Z.D., Chen, Z.G., Shi, Y.W., Mu, N. and Sun, N.: Effect of rare earth element additions on the microstructure and mechanical properties of tin-silver-bismuth solder. J. Electron. Mater. 31, 564 (2002).CrossRefGoogle Scholar
28.Choi, S., Lucas, J.P., Subramanian, K.N. and Bieler, T.R.: Formation and growth of interfacial intermetallic layers in eutectic Sn-Ag solder and its composite solder joints. J. Mater. Sci. Mater. El. 11, 497 (2000).CrossRefGoogle Scholar
29.Guo, F., Lee, J.G., Choi, S., Lucas, J.P., Bieler, T.R. and Subramanian, K.N.: Processing and aging characteristics of eutectic Sn-3.5Ag solder reinforced with mechanically incorporated Ni particles. J. Electron. Mater. 30, 1073 (2001).CrossRefGoogle Scholar
30.Hwang, S.Y., Lee, J.W. and Lee, Z.H.: Microstructure of a lead-free composite solder produced by anin-situ process. J. Electron. Mater. 31, 1304 (2002).CrossRefGoogle Scholar
31.Choi, S., Lee, J.G., Subramanian, K.N., Lucas, J.P. and Bieler, T.R.: Microstructural characterization of damage in thermomechanically fatigued Sn-Ag based solder joints. J. Electron. Mater. 31, 292 (2002).CrossRefGoogle Scholar
32.Lee, J.G., Guo, F., Choi, S., Subramanian, K.N., Bieler, T.R. and Lucas, J.P.: Residual-mechanical behavior of thermomechanically fatigued Sn-Ag based solder joints. J. Electron. Mater. 31, 946 (2002).CrossRefGoogle Scholar
33.Lee, J.G., Guo, F., and Subramanian, K.N.: Thermomechanical fatigue behavior of Pb-free automotive electronic solders, SAE Paper Number 2003-01-0621. (SAE 2003 World Congress, Detroit, MI, 2003).Google Scholar
34.Howell, J., Telang, A., Lee, J.G., Choi, S. and Subramanian, K.N.: Surface damage accumulation in Sn-Ag solder joints under large reversed strains. J. Mater. Sci. Mater. El. 13, 335 (2002).CrossRefGoogle Scholar
35.Ferguson, K.J., Telang, A., Lee, J.G. and Subramanian, K.N.: Microstructural effects on the behavior of Sn-Ag solder joints under repeated reverse stressing. J. Mater. Sci.-Mater. El. 14, 157 (2003).CrossRefGoogle Scholar
36.Chen, K.C., Telang, A., Lee, J.G. and Subramanian, K.N.: Damage accumulation under repeated reverse stressing of Sn-Ag solder joints. J. Electron. Mater. 31, 1181 (2002).CrossRefGoogle Scholar
37.Lee, J.G., Telang, A., Subramanian, K.N. and Bieler, T.R.: Modeling thermomechanical fatigue behavior of Sn-Ag solder joints. J. Electron. Mater. 31, 1152 (2002).CrossRefGoogle Scholar
38.Subramanian, K.N. and Lee, J.G.: Effect of anisotropy of tin on thermomechanical behavior of solder joints. J. Mater. Sci.-Mater. El. 15, 235 (2004).CrossRefGoogle Scholar
39.Cook, B.A., Adnderson, I.E., Harringa, J.H., Terpstra, R.L. and Kang, S.K.: Isothermal aging of near-eutectic Sn-Ag-Cu solder alloys and its effect on electrical resistivity. J. Electron. Mater. 32, 1384 (2003).CrossRefGoogle Scholar
40.Kim, K.D. and Chung, D.D.L.: Effect of heating on the electrical resistivity of conductive adhesive and soldered joints. J. Electron. Mater. 31, 933 (2002).CrossRefGoogle Scholar
41.Choi, S., Bieler, T.R., Lucas, J.P. and Subramanian, K.N.: Characterization of the growth of intermetallic interfacial layers of Sn-Ag and Sn-Pb eutectic solders and their composite solders on Cu substrate during isothermal long-term aging. J. Electron. Mater. 28, 1209 (1999).CrossRefGoogle Scholar
42.Guo, F., Lee, J., Lucas, J.P., Subramanian, K.N. and Bieler, T.R.: Creep properties of eutectic Sn-3.5Ag solder joints reinforced with mechanically incorporated Ni particles. J. Electron. Mater. 30, 1222 (2001).CrossRefGoogle Scholar
43.Guo, F., Choi, S., Lucas, J.P. and Subramanian, K.N.: Microstructural characterisation of reflowed and isothermally-aged Cu and Ag particulate reinforced Sn-3.5Ag composite solders. Solder. Surf. Mt. Tech. 13, 7 (2001).CrossRefGoogle Scholar
44.Gibson, A.W., Choi, S., Subramanian, K.N. and Bieler, T.R.: Issues regarding microstructural coarsening due to aging of eutectic tin-silver solder. Reliability of Solders and Solder Joints, edited by Mahidhara, R.K., Frean, D.R., Sastry, S.M.L., Munty, K.L., Liaue, P.K., and Winterbottom, W.L.. (TMS, Warrendale, PA, 1997), p. 97.Google Scholar
45.Hedges, H.E.: in Tin and its Alloys, 1st ed. (Edward Arnold, London, U.K., 1960), pp. 51–53.Google Scholar
46.Kariya, Y., Williams, N., Gagg, C. and Plumbridge, W.: Tin pest in Sn-0.5 wt% Cu lead-free solder. JOM 53, 39 (2001).CrossRefGoogle Scholar
47.Kariya, Y., Gagg, C. and Plumbridge, W.: Tin pest in lead-free solders. Solder. Surf. Mt. Tech. 13, 39 (2000).CrossRefGoogle Scholar