Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Xiao, Guoqing
Fan, Quncheng
Gu, Meizhuan
Wang, Zihong
and
Jin, Zhihao
2004.
Dissolution–precipitation mechanism of self-propagating high-temperature synthesis of TiCNi cermet.
Materials Science and Engineering: A,
Vol. 382,
Issue. 1-2,
p.
132.
Yang, Y.F.
Wang, H.Y.
Zhao, R.Y.
Liang, Y.H.
Zhan, L.
and
Jiang, Q.C.
2008.
Effects of C particle size on the ignition and combustion characteristics of the SHS reaction in the 20wt.% Ni–Ti–C system.
Journal of Alloys and Compounds,
Vol. 460,
Issue. 1-2,
p.
276.
Yang, Y.F.
Wang, H.Y.
Wang, J.G.
Zhao, R.Y.
and
Jiang, Q.C.
2009.
Ignition and reaction mechanisms of thermal explosion reaction in the Ni-Ti-C system under air and Ar.
Journal of Materials Research,
Vol. 24,
Issue. 10,
p.
3197.
Yang, Y.F.
Wang, H.Y.
Wang, J.G.
Zhao, R.Y.
and
Jiang, Q.C.
2009.
Thermal explosion reaction behaviors between Ti and C with Ni as additive under air and Ar atmosphere.
Journal of Alloys and Compounds,
Vol. 486,
Issue. 1-2,
p.
191.
Liu, Zong-de
Tian, Juan
Li, Bin
and
Zhao, Li-ping
2010.
Microstructure and mechanical behaviors of in situ TiC particulates reinforced Ni matrix composites.
Materials Science and Engineering: A,
Vol. 527,
Issue. 16-17,
p.
3898.
Dutta, H.
Sen, A.
Bhattacharjee, J.
and
Pradhan, S.K.
2010.
Preparation of ternary Ti0.9Ni0.1C cermets by mechanical alloying: Microstructure characterization by Rietveld method and electron microscopy.
Journal of Alloys and Compounds,
Vol. 493,
Issue. 1-2,
p.
666.
Yang, Y.F.
Wang, H.Y.
Wang, J.G.
and
Jiang, Q.C.
2011.
Effect of C particle size on the mechanism of self-propagation high-temperature synthesis in the Ni–Ti–C system.
Journal of Alloys and Compounds,
Vol. 509,
Issue. 25,
p.
7060.
Salim, Sharifah Aishah Syed
Mohamed, Julie Juliewatty
Ahmad, Zainal Arifin
and
Ahmad, Zainal Arifin
2012.
Effect of Nickel on Titanium Carbide Synthesized via Tungsten Inert Gas (TIG) Method.
Advanced Materials Research,
Vol. 620,
Issue. ,
p.
384.
Savalani, M.M.
Ng, C.C.
Li, Q.H.
and
Man, H.C.
2012.
In situ formation of titanium carbide using titanium and carbon-nanotube powders by laser cladding.
Applied Surface Science,
Vol. 258,
Issue. 7,
p.
3173.
Bandyopadhyay, S.
Dutta, H.
and
Pradhan, S.K.
2013.
XRD and HRTEM characterization of mechanosynthesized Ti0.9W0.1C cermet.
Journal of Alloys and Compounds,
Vol. 581,
Issue. ,
p.
710.
Li, Q.H.
Savalani, M.M.
Zhang, Q.M.
and
Huo, L.
2014.
High temperature wear characteristics of TiC composite coatings formed by laser cladding with CNT additives.
Surface and Coatings Technology,
Vol. 239,
Issue. ,
p.
206.
Gao, Wenyan
Zhang, Zhiyan
Zhao, Shusen
Wang, Yibo
Chen, Han
and
Lin, Xuechun
2016.
Effect of a small addition of Ti on the Fe-based coating by laser cladding.
Surface and Coatings Technology,
Vol. 291,
Issue. ,
p.
423.
Pradhan, S.K.
and
Dutta, H.
2016.
Advanced Engineering Materials and Modeling.
p.
49.
Hu, Wenqiang
Huang, Zhenying
Cai, Leping
Lei, Cong
Yu, Wenbo
Zhai, Hongxiang
Wo, Shaoshuai
Li, Xinkang
and
Zhou, Yang
2018.
Microstructural characterization and mechanical properties of a novel TiC-based cermet bonded with Ni3(Al,Ti) and NiAl duplexalloy.
Materials Characterization,
Vol. 135,
Issue. ,
p.
295.
Zhang, Jian-lei
Hu, Cong-hui
Liu, Yu-xiang
Yang, Yang
Ji, Gang
Song, Chang-jiang
and
Zhai, Qi-jie
2021.
Precipitation strengthening of nano-scale TiC in a duplex low-density steel under near-rapid solidification.
Journal of Iron and Steel Research International,
Vol. 28,
Issue. 9,
p.
1141.