Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Young, Bi-Lian
and
Duh, Jenq-Gong
2001.
Interfacial reaction and microstructural evolution for electroplated Ni and electroless Ni in the under bump metallurgy with 42Sn58Bi solder during annealing.
Journal of Electronic Materials,
Vol. 30,
Issue. 7,
p.
878.
Alam, M.O
Chan, Y.C
and
Hung, K.C
2002.
Reliability study of the electroless Ni–P layer against solder alloy.
Microelectronics Reliability,
Vol. 42,
Issue. 7,
p.
1065.
Alam, M. O.
Chan, Y. C.
and
Hung, K. C.
2002.
Interfacial reaction of Pb-Sn solder and Sn-Ag solder with electroless Ni deposit during reflow.
Journal of Electronic Materials,
Vol. 31,
Issue. 10,
p.
1117.
Goyal, D.
Lane, T.
Kinzie, P.
Panichas, C.
Kam Meng Chong
and
Villalobos, O.
2002.
Failure mechanism of brittle solder joint fracture in the presence of electroless nickel immersion gold (ENIG) interface.
p.
732.
Alam, M.O.
Chan, Y.C.
and
Hung, K.C.
2002.
Reaction kinetics of Pb-Sn and Sn-Ag solder balls with electroless Ni-P/Cu pad during reflow soldering in microelectronic packaging.
p.
1650.
Kejun Zeng
Vuorinen, V.
and
Kivilahti, J.K.
2002.
Interfacial reactions between lead-free SnAgCu solder and Ni(P) surface finish on printed circuit boards.
IEEE Transactions on Electronics Packaging Manufacturing,
Vol. 25,
Issue. 3,
p.
162.
Zeng, K.
and
Tu, K.N.
2002.
Six cases of reliability study of Pb-free solder joints in electronic packaging technology.
Materials Science and Engineering: R: Reports,
Vol. 38,
Issue. 2,
p.
55.
Alam, M. O.
Chan, Y. C.
and
Tu, K. N.
2003.
Effect of reaction time and P content on mechanical strength of the interface formed between eutectic Sn–Ag solder and Au/electroless Ni(P)/Cu bond pad.
Journal of Applied Physics,
Vol. 94,
Issue. 6,
p.
4108.
Sohn, Y. C.
Yu, Jin
Kang, S. K.
Choi, W. K.
and
Shih, D. Y.
2003.
Study of the reaction mechanism between electroless Ni–P and Sn and its effect on the crystallization of Ni–P.
Journal of Materials Research,
Vol. 18,
Issue. 1,
p.
4.
Zhang, F.
Li, M.
Chum, C. C.
and
Tung, C-H.
2003.
Effects of substrate metallizations on solder/underbump metallization interfacial reactions in flip-chip packages during thermal aging.
Journal of Materials Research,
Vol. 18,
Issue. 6,
p.
1333.
Kumar, A.
He, M.
Chen, Z.
and
Teo, P.S.
2004.
Effect of electromigration on interfacial reactions between electroless Ni-P and Sn–3.5% Ag solder.
Thin Solid Films,
Vol. 462-463,
Issue. ,
p.
413.
Chen, W. -M.
Mccloskey, P.
Byrne, P.
Cheasty, P.
Duffy, G.
Rohan, J. F.
Boardman, J.
Mulcahy, A.
and
O’Mathuna, S. C.
2004.
Degradation of electroless Ni(P) under-bump metallization in Sn3.5Ag and Sn37Pb solders during high-temperature storage.
Journal of Electronic Materials,
Vol. 33,
Issue. 8,
p.
900.
He, Min
Lau, Wee Hua
Qi, Guojun
and
Chen, Zhong
2004.
Intermetallic compound formation between Sn–3.5Ag solder and Ni-based metallization during liquid state reaction.
Thin Solid Films,
Vol. 462-463,
Issue. ,
p.
376.
Sohn, Y. C.
Yu, Jin
Kang, S. K.
Shih, D. Y.
and
Choi, W. K.
2004.
Effects of phosphorus content on the reaction of electroless Ni-P with Sn and crystallization of Ni-P.
Journal of Electronic Materials,
Vol. 33,
Issue. 7,
p.
790.
He, Min
Chen, Zhong
and
Qi, Guojun
2004.
Solid state interfacial reaction of Sn–37Pb and Sn–3.5Ag solders with Ni–P under bump metallization.
Acta Materialia,
Vol. 52,
Issue. 7,
p.
2047.
Wu, C.M.L.
Yu, D.Q.
Law, C.M.T.
and
Wang, L.
2004.
Properties of lead-free solder alloys with rare earth element additions.
Materials Science and Engineering: R: Reports,
Vol. 44,
Issue. 1,
p.
1.
Huang, Zhiheng
Conway, Paul P.
Liu, Changqing
and
Thomson, Rachel C.
2005.
Effect of solder bump geometry on the microstructure of Sn–3.5 wt% Ag on electroless nickel immersion gold during solder dipping.
Journal of Materials Research,
Vol. 20,
Issue. 3,
p.
649.
Sharif, Ahmed
and
Chan, Y. C.
2005.
Interfacial reactions of Sn-3.5% Ag and Sn-3.5% Ag-0.5% Cu solder with electroless Ni/Au metallization during multiple reflow cycles.
Journal of Materials Science: Materials in Electronics,
Vol. 16,
Issue. 3,
p.
153.
Sharif, Ahmed
Chan, Y.C.
Islam, M.N.
and
Rizvi, M.J.
2005.
Dissolution of electroless Ni metallization by lead-free solder alloys.
Journal of Alloys and Compounds,
Vol. 388,
Issue. 1,
p.
75.
Chen, K.
Liu, C.
Whalley, D.C.
and
Hutt, D.A.
2005.
Stability of Ni>inf<3>/inf<P and its effect on the interfacial reaction between electroless Ni-P and molten tin.
p.
107.