Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Suresh, S.
and
Giannakopoulos, A.E.
1998.
A new method for estimating residual stresses by instrumented sharp indentation.
Acta Materialia,
Vol. 46,
Issue. 16,
p.
5755.
Giannakopoulos, A.E.
and
Suresh, S.
1999.
Determination of elastoplastic properties by instrumented sharp indentation.
Scripta Materialia,
Vol. 40,
Issue. 10,
p.
1191.
Lietzan, L.M.
Mathew, M. D.
Murty, K. L.
and
Shah, V. N.
1999.
Ninth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors.
p.
517.
Ramamurty, U
Sridhar, S
Giannakopoulos, A.E
and
Suresh, S
1999.
An experimental study of spherical indentation on piezoelectric materials.
Acta Materialia,
Vol. 47,
Issue. 8,
p.
2417.
Mathew, M.D.
Lietzan, L.M.
Murty, K.L.
and
Shah, V.N.
1999.
Low temperature aging embrittlement of CF-8 stainless steel.
Materials Science and Engineering: A,
Vol. 269,
Issue. 1-2,
p.
186.
Nakamura, T.
Wang, T.
and
Sampath, S.
2000.
Determination of properties of graded materials by inverse analysis and instrumented indentation.
Acta Materialia,
Vol. 48,
Issue. 17,
p.
4293.
Alcalá, Jorge
2000.
Instrumented Micro‐indentation of Zirconia Ceramics.
Journal of the American Ceramic Society,
Vol. 83,
Issue. 8,
p.
1977.
Alcalá, J.
Barone, A.C.
and
Anglada, M.
2000.
The influence of plastic hardening on surface deformation modes around Vickers and spherical indents.
Acta Materialia,
Vol. 48,
Issue. 13,
p.
3451.
Alcalá, J.
Gaudette, F.
Suresh, S.
and
Sampath, S.
2001.
Instrumented spherical micro-indentation of plasma-sprayed coatings.
Materials Science and Engineering: A,
Vol. 316,
Issue. 1-2,
p.
1.
Ahn, Jeong-Hoon
and
Kwon, Dongil
2001.
Derivation of plastic stress–strain relationship from ball indentations: Examination of strain definition and pileup effect.
Journal of Materials Research,
Vol. 16,
Issue. 11,
p.
3170.
Bouzakis, K.-D.
Michailidis, N.
and
Erkens, G.
2001.
Thin hard coatings stress–strain curve determination through a FEM supported evaluation of nanoindentation test results.
Surface and Coatings Technology,
Vol. 142-144,
Issue. ,
p.
102.
Dao, M.
Chollacoop, N.
Van Vliet, K.J.
Venkatesh, T.A.
and
Suresh, S.
2001.
Computational modeling of the forward and reverse problems in instrumented sharp indentation.
Acta Materialia,
Vol. 49,
Issue. 19,
p.
3899.
Ahn, Jeong-Hoon
Jeon, Eun-chae
Choi, Yeol
Lee, Yun-Hee
and
Kwon, Dongil
2002.
Derivation of tensile flow properties of thin films using nanoindentation technique.
Current Applied Physics,
Vol. 2,
Issue. 6,
p.
525.
Bouzakis, K.-D.
Michailidis, N.
Hadjiyiannis, S.
Skordaris, G.
and
Erkens, G.
2002.
The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress–strain laws by nanoindentation.
Materials Characterization,
Vol. 49,
Issue. 2,
p.
149.
Bouzakis, K.-D.
Michailidis, N.
Hadjiyiannis, S.
Skordaris, G.
and
Erkens, G.
2002.
Continuous FEM simulation of the nanoindentation.
Zeitschrift für Metallkunde,
Vol. 93,
Issue. 9,
p.
862.
Thurn, Jeremy
Morris, Dylan J.
and
Cook, Robert F.
2002.
Depth-sensing indentation at macroscopic dimensions.
Journal of Materials Research,
Vol. 17,
Issue. 10,
p.
2679.
Liu, Cheng
Qin, Shuyi
Zhang, Guoding
and
Naka, Masaaki
2002.
Micromechanical properties of high fracture performance SiCp–6061Al/6061Al composite.
Materials Science and Engineering: A,
Vol. 332,
Issue. 1-2,
p.
203.
Mata, M.
and
Alcalá, J.
2003.
Mechanical property evaluation through sharp indentations in elastoplastic and fully plastic contact regimes.
Journal of Materials Research,
Vol. 18,
Issue. 7,
p.
1705.
Kumar, P.Sudheer
Ramachandra, S.
and
Ramamurty, U.
2003.
Effect of displacement-rate on the indentation behavior of an aluminum foam.
Materials Science and Engineering: A,
Vol. 347,
Issue. 1-2,
p.
330.
Ma, Dejun
Ong, Chung Wo
Lu, Jian
and
He, Jiawen
2003.
Methodology for the evaluation of yield strength and hardening behavior of metallic materials by indentation with spherical tip.
Journal of Applied Physics,
Vol. 94,
Issue. 1,
p.
288.