Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-09T20:05:38.420Z Has data issue: false hasContentIssue false
  • English
  • Français

Thermal Stability Enhancement in Nanostructured Cu Films Containing Insoluble Tungsten Carbides for Metallization

Published online by Cambridge University Press:  01 June 2005

J.P. Chu ,
Y.Y. Hsieh ,
C.H. Lin  and
T. Mahalingam
J.P. Chu*
Affiliation:
Institute of Materials Engineering, National Taiwan Ocean University, Keelung 202, Taiwan
Y.Y. Hsieh
Affiliation:
Institute of Materials Engineering, National Taiwan Ocean University, Keelung 202, Taiwan
C.H. Lin
Affiliation:
Institute of Materials Engineering, National Taiwan Ocean University, Keelung 202, Taiwan
T. Mahalingam
Affiliation:
Institute of Materials Engineering, National Taiwan Ocean University, Keelung 202, Taiwan
*
a) Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

We report enhanced thermal stabilities of nanostructured Cu films containing insoluble tungsten carbides prepared by sputter deposition. Tungsten carbides in the form of W2C are present in the supersaturated solid solution of Cu, as confirmed by x-ray photoelectron spectroscopy, scanning electron microscopy, and x-ray diffraction analyses. Focused ion beam analysis revealed that the films are thermally stable during annealing when they are in contact with Si without a diffusion barrier, and the copper silicide was not formed up to an annealing temperature of 400 °C. Leakage current characteristic evaluation on SiO2/Si metal oxide semiconductor (MOS) structure also revealed the superior reliability of Cu with a dilute amount of tungsten carbides, indicating their usefulness in advanced barrierless metallization applications. The films with higher amount of tungsten carbides exhibited good thermal stability at high temperatures and could be rationalized as a consequence of a refined grain structure together with the strengthening effect of W2C.

Keywords

Electrical propertiesSputteringX-ray photoelectron spectroscopy (XPS)
Type
Rapid Communications
Information
Journal of Materials Research , Volume 20 , Issue 6 , June 2005 , pp. 1379 - 1384
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Li, B., Sullivan, T.D., Lee, T.C. and Badami, D.: Reliability challenges for copper interconnects. Microelectron. Reliab. 44, 365 (2004).CrossRefGoogle Scholar
2Sun, L., Fouere, J-C., Sammet, T., Hatzistergos, M. and Efstathiadis, H.: Spectroscopic ellipsometry (SE) and grazing x-ray reflectometry (GXR) analyses on tungsten carbide films for diffusion barrier in copper metallization schemes. Thin Solid Films 455–456, 519 (2004).CrossRefGoogle Scholar
3Wang, S.J., Tsai, H.Y. and Sun, S.C.: A comparative study of sputtered TaC x and WCx films as diffusion barriers between Cu and Si. Thin Solid Films 394, 179 (2001).CrossRefGoogle Scholar
4Banerjee, K., Souri, S.J., Kapur, P. and Saraswat, K.C.: 3-D ICs: A novel chip design for improving deep-submicrometer interconnect performance and systems-on-chip Integration. Proc. IEEE 89, 602 (2001).CrossRefGoogle Scholar
5Kapur, P., McVittie, J.P. and Saraswat, K.C.: Technology and reliability constrained future copper interconnects—Part I: Resistance modeling. IEEE Trans. Electron Devices 49, 590 (2002).CrossRefGoogle Scholar
6Chu, J.P., Chung, C.H., Lee, P.Y., Rigsbee, J.M. and Wang, J.Y.: Microstructure and properties of Cu-C pseudoalloy films prepared by sputter deposition. Metall. Mater. Trans. A 29A, 647 (1998).CrossRefGoogle Scholar
7Chu, J.P. and Lin, T.N.: Deposition, microstructure and properties of sputtered copper films containing insoluble molybdenum. J. Appl. Phys. 85, 6462 (1999).CrossRefGoogle Scholar
8Chu, J.P., Liu, C.J., Lin, C.H. and Wang, S.F.: Characterizations of superhard Cu films containing insoluble W prepared by sputter deposition. Mater. Chem. Phys. 72, 286 (2001).CrossRefGoogle Scholar
9Liu, C.J. and Chen, J.S.: Low leakage current Cu(Ti)/SiO2 interconnection scheme with a self-formed TiO x diffusion barrier. Appl. Phys. Lett. 80, 2678 (2002).CrossRefGoogle Scholar
10Barmak, K., Gungor, A., Rollett, A.D., Cabral, C. and Harper, J.M.E.: Texture of Cu and dilute binary Cu-alloy films: impact of annealing and solute content. Mater. Sci. Semicond. Processing. 6, 175 (2003).CrossRefGoogle Scholar
11Barmak, K., Gungor, A., Cabral, C. Jr. and Harper, J.M.E.: Annealing behavior of Cu and dilute Cu-alloy films: Precipitation, grain growth, and resistivity. J. Appl. Phys. 94, 1605 (2003).CrossRefGoogle Scholar
12Lin, C.H., Chu, J.P., Mahalingam, T., Lin, T.N. and Wang, S.F.: Thermal stability of sputtered copper films containing dilute insoluble tungsten: A thermal annealing study. J. Mater. Res. 18, 1429 (2003).CrossRefGoogle Scholar
13Lin, C.H., Chu, J.P., Mahalingam, T., Lin, T.N. and Wang, S.F.: Sputtered copper films with insoluble elements for Cu metallization: A thermal annealing study. J. Elect. Mater. 32, 1235 (2003).CrossRefGoogle Scholar
14Oxley, J.D., Mdleleni, M.M. and Suslick, K.S.: Hydrodehalogenation with sonochemically prepared Mo2C and W2C. Catal. Today 88, 139 (2004).CrossRefGoogle Scholar
15Ohring, M.: Materials Science of Thin Film (Academic Press, Boston, MA, 1991), pp. 455–461.Google Scholar