Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Knorr, P.
Nam, J.G.
and
Lee, J.S.
1999.
Densification and microstructural development of nanocrystalline γ-Ni-Fe powders during sintering.
Nanostructured Materials,
Vol. 12,
Issue. 1-4,
p.
479.
Qin, X.Y
Lee, J.S
Nam, J.G
and
Kim, B.S
1999.
Synthesis and microstructureal characterization of nanostructured γ-Ni-Fe powder.
Nanostructured Materials,
Vol. 11,
Issue. 3,
p.
383.
Qin, X.Y.
Kim, J.G.
and
Lee, J.S.
1999.
Synthesis and magnetic properties of nanostructured γ-Ni-Fe alloys.
Nanostructured Materials,
Vol. 11,
Issue. 2,
p.
259.
Knorr, P.
Kim, B.S.
and
Lee, J.S.
1999.
The Kinetics of Formation Of Nanocrystalline γ-Ni-Fe During Mechano-Chemical Synthesis.
MRS Proceedings,
Vol. 577,
Issue. ,
Xia, B.
Lenggoro, I. W.
and
Okuyama, K.
2000.
The roles of ammonia and ammonium bicarbonate in the preparation of nickel particles from nickel chloride.
Journal of Materials Research,
Vol. 15,
Issue. 10,
p.
2157.
Knorr, P.
Nam, J. G.
and
Lee, J. S.
2000.
Sintering behavior of nanocrystalline γ-Ni-Fe powders.
Metallurgical and Materials Transactions A,
Vol. 31,
Issue. 2,
p.
503.
Vander Wal, Randall L
and
Ticich, Thomas M
2001.
Comparative flame and furnace synthesis of single-walled carbon nanotubes.
Chemical Physics Letters,
Vol. 336,
Issue. 1-2,
p.
24.
Ennas, G
Casula, M.F
Falqui, A
Gatteschi, D
Marongiu, G
Piccaluga, G
Sangregorio, C
and
Pinna, G
2001.
Nanocrystalline iron–cobalt alloys supported on a silica matrix prepared by the sol–gel method.
Journal of Non-Crystalline Solids,
Vol. 293-295,
Issue. ,
p.
1.
Qin, X. Y.
Lee, J. S.
and
Lee, C. S.
2002.
Microstructures and Mechanical Behavior of Bulk Nanocrystalline γ–Ni–Fe Produced by a Mechanochemical Method.
Journal of Materials Research,
Vol. 17,
Issue. 5,
p.
991.
Concas, G.
Congiu, F.
Ennas, G.
Piccaluga, G.
and
Spano, G.
2003.
Investigation of cobalt–iron alloy nanoparticles in silica matrix by X-ray diffraction and Mössbauer spectroscopy.
Journal of Non-Crystalline Solids,
Vol. 330,
Issue. 1-3,
p.
234.
Qin, X.Y.
Cheong, S.H.
and
Lee, J.S.
2003.
Tensile behavior of nanocrystalline Ni–Fe alloy.
Materials Science and Engineering: A,
Vol. 363,
Issue. 1-2,
p.
62.
Pithawalla, Yezdi B.
and
Deevi, Sarojini
2004.
Chemical synthesis of iron aluminide [FeAl] and iron aluminum carbide [Fe3AlC0.5] nanopowders.
Materials Research Bulletin,
Vol. 39,
Issue. 14-15,
p.
2303.
Eroglu, S.
and
Bakan, H.I.
2004.
Thermodynamic Analysis of Mo<sub>2</sub>C Powder Synthesis by Chemical Vapor Reaction Method .
Key Engineering Materials,
Vol. 264-268,
Issue. ,
p.
121.
Lemoisson, F.
and
Froyen, L.
2005.
Fundamentals of Metallurgy.
p.
471.
Bouhouch, L.
Fadel, M.
and
Hilali, E.
2006.
Magnetic properties of the electrolytic super alloys Ni‐Fe.
physica status solidi c,
Vol. 3,
Issue. 9,
p.
3253.
Folch, Benjamin
Larionova, Joulia
Guari, Yannick
Datas, Lucien
and
Guérin, Christian
2006.
A coordination polymer precursor approach to the synthesis of NiFe bimetallic nanoparticles within hybrid mesoporous silica.
J. Mater. Chem.,
Vol. 16,
Issue. 45,
p.
4435.
Fnidiki, A.
Lemarchand, D.
and
Ben Youssef, J.
2010.
Structural and magnetic properties of granular (Ni0.84Fe0.16)54(alumina)46 sputtered thin films.
Physica B: Condensed Matter,
Vol. 405,
Issue. 12,
p.
2632.
Bac, L.H.
Kwon, Y.S.
Kim, J.S.
Lee, Y.I.
Lee, D.W.
and
Kim, J.C.
2010.
Synthesis and characteristic of FeNi3 intermetallic compound obtained by electrical explosion of wire.
Materials Research Bulletin,
Vol. 45,
Issue. 3,
p.
352.
Cetinkaya, S.
and
Eroglu, S.
2010.
Thermodynamic analysis and synthesis of porous Mo2C sponge by vapor-phase condensation and in situ carburization of MoO3.
Journal of Alloys and Compounds,
Vol. 489,
Issue. 1,
p.
36.
Bac, L. H.
Kim, J. S.
and
Kim, J. C.
2010.
Synthesis of Fe–Ni invar alloy nanopowder by the electrical explosion of wire in the liquid.
Research on Chemical Intermediates,
Vol. 36,
Issue. 6-7,
p.
795.