Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Khonik, V. A.
Kitagawa, K.
and
Morii, H.
2000.
On the determination of the crystallization activation energy of metallic glasses.
Journal of Applied Physics,
Vol. 87,
Issue. 12,
p.
8440.
Louzguine, D.V
and
Inoue, A
2000.
Nanocrystallization of Ti-Ni-Cu-Sn amorphous alloy.
Scripta Materialia,
Vol. 43,
Issue. 4,
p.
371.
Kim, K.B.
Yi, S.
Kim, S.H.
Kim, W.T.
and
Kim, D.H.
2001.
Structural evolution of the Ti70Ni15Al15 powders prepared by mechanical alloying.
Materials Science and Engineering: A,
Vol. 300,
Issue. 1-2,
p.
148.
Louzguine, Dmitri V.
and
Inoue, Akihisa
2002.
Evaluation of the thermal stability of a Cu60Hf25Ti15 metallic glass.
Applied Physics Letters,
Vol. 81,
Issue. 14,
p.
2561.
Louzguine, Dmitri V.
and
Inoue, Akihisa
2002.
Comparison of the long-term thermal stability of various metallic glasses under continuous heating.
Scripta Materialia,
Vol. 47,
Issue. 12,
p.
887.
Wang, Wei Hua
Bian, Ping Wen, Z
Zhang, Yong
Pan, M.X
and
Zhao, D.Q
2002.
Role of addition in formation and properties of Zr-based bulk metallic glasses.
Intermetallics,
Vol. 10,
Issue. 11-12,
p.
1249.
Zhang, Y.
Zhao, D. Q.
Pan, M. X.
and
Wang, W. H.
2003.
Relationship between glass forming ability and thermal parameters of Zr based bulk metallic glasses.
Materials Science and Technology,
Vol. 19,
Issue. 7,
p.
973.
Zhang, Y
Zhao, D.Q
Pan, M.X
and
Wang, W.H
2003.
Glass forming properties of Zr-based bulk metallic alloys.
Journal of Non-Crystalline Solids,
Vol. 315,
Issue. 1-2,
p.
206.
Kim, K.B.
Ko, B.C.
and
Pak, S.J.
2004.
Formation of nanocrystals in Ti78Fe15Si7 amorphous alloy with a wide supercooled liquid region.
Materials Science and Engineering: A,
Vol. 366,
Issue. 2,
p.
421.
Zhang, Lai-Chang
Xu, Jian
and
Eckert, Jürgen
2006.
Thermal stability and crystallization kinetics of mechanically alloyed TiC∕Ti-based metallic glass matrix composite.
Journal of Applied Physics,
Vol. 100,
Issue. 3,
Huang, Y.J.
Shen, J.
Sun, J.F.
and
Yu, X.B.
2007.
A new Ti–Zr–Hf–Cu–Ni–Si–Sn bulk amorphous alloy with high glass-forming ability.
Journal of Alloys and Compounds,
Vol. 427,
Issue. 1-2,
p.
171.
Oak, Jeong-Jung
Louzguine-Luzgin, Dmitri V.
and
Inoue, Akihisa
2007.
Fabrication of Ni-free Ti-based bulk-metallic glassy alloy having potential for application as biomaterial, and investigation of its mechanical properties, corrosion, and crystallization behavior.
Journal of Materials Research,
Vol. 22,
Issue. 5,
p.
1346.
Oshida, Yoshiki
2007.
Bioscience and Bioengineering of Titanium Materials.
p.
381.
Mei, J.N.
Li, J.S.
Kou, H.C.
Fu, H.Z.
and
Zhou, L.
2008.
Effects of Nb on the formation of icosahedral quasicrystalline phase in Ti-rich Ti–Zr–Ni–Cu–Be glassy forming alloys.
Journal of Non-Crystalline Solids,
Vol. 354,
Issue. 28,
p.
3332.
Zhu, S.L.
Wang, X.M.
and
Inoue, A.
2008.
Glass-forming ability and mechanical properties of Ti-based bulk glassy alloys with large diameters of up to 1cm.
Intermetallics,
Vol. 16,
Issue. 8,
p.
1031.
Oak, Jeong-Jung
Louzguine-Luzgin, Dmitri V.
and
Inoue, Akihisa
2009.
Investigation of glass-forming ability, deformation and corrosion behavior of Ni-free Ti-based BMG alloys designed for application as dental implants.
Materials Science and Engineering: C,
Vol. 29,
Issue. 1,
p.
322.
Suer, Sila
Mekhrabov, Amdulla O.
and
Akdeniz, M. Vedat
2009.
Theoretical prediction of bulk glass forming ability (BGFA) of Ti–Cu based multicomponent alloys.
Journal of Non-Crystalline Solids,
Vol. 355,
Issue. 6,
p.
373.
Oshida, Yoshiki
Tuna, Elif B.
Aktören, Oya
and
Gençay, Koray
2010.
Dental Implant Systems.
International Journal of Molecular Sciences,
Vol. 11,
Issue. 4,
p.
1580.
Zhu, S.L.
Yang, X.J.
and
Cui, Z.D.
2010.
Formation of Ca–P layer on the Ti-based bulk glassy alloy by chemical treatment.
Journal of Alloys and Compounds,
Vol. 504,
Issue. ,
p.
S168.
Zhang, S. G.
Hu, G. H.
Meng, Q. G.
and
Li, J. G.
2010.
Glass Formation and Mechanical Properties of Ti–Cu–Ni Alloys with High Ti Content.
Journal of ASTM International,
Vol. 7,
Issue. 2,
p.
1.