Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-19T22:43:04.155Z Has data issue: false hasContentIssue false
  • English
  • Français

In situ deposition of iron nanoparticles on transmission electron microscopy grid in furnace aerosol reactor

Published online by Cambridge University Press:  03 March 2011

Kyun Young Park ,
Jong Kwan Park  and
Sang Hwa Lim
Kyun Young Park
Affiliation:
Department of Chemical Engineering, Kongju National University, 182 Shinkwandong, Konju, Chungnam 314–701, Korea
Jong Kwan Park
Affiliation:
Department of Chemical Engineering, Kongju National University, 182 Shinkwandong, Konju, Chungnam 314–701, Korea
Sang Hwa Lim
Affiliation:
Department of Chemical Engineering, Kongju National University, 182 Shinkwandong, Konju, Chungnam 314–701, Korea
Get access

Abstract

In the current work, a device was proposed for the first time to deposit the particles in situ on a transmission electron micrography grid within furnace aerosol reactors. The device was successfully tested on iron particles produced by thermal decomposition of Fe(CO)5 at 600 °C in a quartz tube heated by an electric heater. The particle depositions were made at four different spatial locations in the axial direction and investigated by transmission electron microscopy. At the reactor inlet, chain agglomerates of 2–3-nm particles were observed. At 19 cm from the inlet, the particles within the agglomerate structures fully coalesced by sintering, and at 32 cm (reactor outlet), polyhedral particles of about 100 nm in diameter emerged from the sintered body.

Type
Rapid Communications
Information
Journal of Materials Research , Volume 18 , Issue 10 , October 2003 , pp. 2285 - 2287
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Okuyama, K., Ushio, R., Kokusaka, Y., Flagan, R.C., and Seinfeld, J.H., AIChE J. 36, 409 (1990).CrossRefGoogle Scholar
2.Akhtar, M.K., Xiong, Y., and Pratsinis, S.E., AIChE J. 37, 1561 (1991).CrossRefGoogle Scholar
3.Park, K.Y., Jang, H.D., and Choi, C.S., Aerosol Sci. Technol. 28, 215 (1998).CrossRefGoogle Scholar
4.Martelli, S., Bomati-Miguel, O., de Dominicis, L., Giorgi, R., Rinaldi, F., and Veintemillas-Verdaguer, S., Appl. Surf. Sci. 186, 562 (2002).Google Scholar
5.Wu, M.K., Windeler, R.S., Steiner, C.K.R., Bors, T., and Friedlander, S.K., Aerosol Sci. Technol. 19, 527 (1993).CrossRefGoogle Scholar
6.Seto, T., Shimada, M., and Okuyama, K., Aerosol Sci. Technol. 23, 183 (1995).CrossRefGoogle Scholar
7.Tsantilis, S. and Pratsinis, S.E., AIChE J. 46, 407 (2000).Google Scholar