Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-26T12:37:20.806Z Has data issue: false hasContentIssue false
  • English
  • Français

Effects of intrinsic properties of TiN coatings on acoustic emission behavior at scratch test

Published online by Cambridge University Press:  31 January 2011

Shuji Yamamoto  and
Hiroshi Ichimura
Shuji Yamamoto
Affiliation:
Central Research Laboratory, Sumitomo Metal Mining Co., Ltd., 18-5, 3 Nakakokubun Ichikawa, Chiba 272, Japan
Hiroshi Ichimura
Affiliation:
Central Research Laboratory, Sumitomo Metal Mining Co., Ltd., 18-5, 3 Nakakokubun Ichikawa, Chiba 272, Japan
Get access

Abstract

Acoustic emission (AE) behavior at scratch test has been studied for TiN coatings that deposited in an ion plating system. The AE intensity of the coatings measured by the scratch test depended not only on the adhesion of a coating-substrate interface but also on the intrinsic properties of a deposited film. In this work, a careful separation of coating parameters was investigated to clarify the relationship between the AE intensity and the intrinsic properties of coated films. For identical coating conditions, the AE intensity increased with coating thickness since the elastic energy released during the scratching is proportional to film thickness. It has been found that the coatings prepared at higher substrate temperature and/or at higher substrate bias voltage had a larger crystallite size and lower internal stress. With increasing bias voltage and substrate temperature, the AE intensity of TiN coatings decreased. An explanation for this behavior has been proposed in terms of the internal stress and the toughness of the deposited films.

Type
Articles
Information
Journal of Materials Research , Volume 7 , Issue 8 , August 1992 , pp. 2240 - 2247
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Freller, H. and Haessler, H., Thin Solid Films 153, 67 (1987).CrossRefGoogle Scholar
2.Steinmann, P. A. and Hintermann, H. E., J. Vac. Sci. Technol. A3, 2349 (1985).Google Scholar
3.Perry, A. J., Thin Solid Films 107, 2394 (1985).Google Scholar
4.Yamamoto, S., Ohmura, T., Kawana, A., Chiba, Y., and Ichimura, H., in Composites/Corrosion-Coating of Advanced Materials, edited by Kimura, S., Kobayashi, A., Nii, S. Umekawa/K., Saito, Y., and Yoshimura, M. (Mater. Res. Soc. Symp. Int. Proc. 4, Pittsburgh, PA, 1989), p. 507.Google Scholar
5.Sun, R. C., Tisone, T. C., and Cruzan, P. D., J. Appl. Phys. 46, 112 (1975).CrossRefGoogle Scholar
6.Mechanical Properties of Ceramics (Ceramics Society of Japan, 1979), p. 125.Google Scholar
7.Weaver, C., J. Vac. Sci. Technol. 12, 18 (1975).CrossRefGoogle Scholar
8.Burnett, P. J. and Rickerby, D. S., Thin Solid Films 157, 233 (1988).CrossRefGoogle Scholar
9.Oikawa, H. and Nakajima, Y., J. Vac. Sci. Technol. 14, 1153 (1977).CrossRefGoogle Scholar
10.Niihara, K., Bull. Ceram. Soc. Jpn. 20, 12 (1985).Google Scholar