Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-26T04:30:53.398Z Has data issue: false hasContentIssue false
  • English
  • Français

The effect of Cr and La on MgTiO3 and MgTiO3–CaTiO3 microwave dielectric ceramics

Published online by Cambridge University Press:  31 January 2011

V. M. Ferreira ,
F. Azough ,
R. Freer  and
J. L. Baptista
V. M. Ferreira
Affiliation:
Departamento de Engenharia Ceramica e Vidro, Universidade de Aveiro, 3800 Aveiro, Portugal
F. Azough
Affiliation:
Manchester Materials Science Centre, University of Manchester/UMIST, Manchester M1 7HS, United Kingdom
R. Freer
Affiliation:
Manchester Materials Science Centre, University of Manchester/UMIST, Manchester M1 7HS, United Kingdom
J. L. Baptista
Affiliation:
Departamento de Engenharia Ceramica e Vidro, Universidade de Aveiro, 3800 Aveiro, Portugal
Get access

Abstract

Magnesium titanate and MgTiO3–CaTiO3 ceramics were prepared by a chemical (Pechini) route and classical mixed oxide route. Selected specimens were doped with Cr or La. Specimens were sintered at 1350 °C and 1400 °C. Microstructures were examined by optical microscopy, scanning electron microscopy, and transmission electron microscopy. Dielectric properties were determined at 8 GHz by the Hakki and Coleman method. The highest Q values were obtained for undoped, chemically prepared MgTiO3 (20800); any dopants caused the Q value to be degraded. Additions of small amounts of Cr (≤1 mol %) to mixed oxide magnesium titanate increased the density to 97.1% theoretical, and increased the Q value (from 7000) to 13,000. Additions of La led to the formation of La2Ti2O7 second phase and reduction in the Q value for both materials. Both Cr and La acted as effective sintering aids, increasing density (to a maximum of 99% theoretical for 1% mol La in chemically prepared samples) and relative permittivity (to 18.1 for the same specimens). The relative permittivity of MgTiO3–CaTiO3 ceramics increased with calcium content, but the corresponding Q values decreased (∈r = 19.9, Q = 8500 for Mg:Ca = 94: 6). Small additions of La to Mg–Ca titanates enhanced the dielectric Q values but decreased the relative permittivities.

Type
Articles
Information
Journal of Materials Research , Volume 12 , Issue 12 , December 1997 , pp. 3293 - 3299
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Wakino, K., Ferroelectrics 91, 69 (1989).CrossRefGoogle Scholar
2.Negas, N., Yeager, G., Bell, S., and Amren, R., Chemistry and properties of temperature compensated microwave dielectrics, NIST spec. publ. 804, in Chemistry of Electronic Ceramic Materials (1991), p. 21.Google Scholar
3.Freer, R., Silicate Industriels 59, 191 (1993).Google Scholar
4.Wakino, K., in Proc. 6th IEEE Symp. on Applications of Ferroelectrics, ISAF ‘86, Bethlehem, PA (1986), p. 97.Google Scholar
5.Ferreira, V. M., Azough, F., Baptista, J. L., and Freer, R., Ferroelectrics 133, 127 (1992).CrossRefGoogle Scholar
6.Pechini, M. P., U.S. Patent 3,330,697 (1967).Google Scholar
7.Azough, F. and Freer, R., in Proc. 7th IEEE Int. Symp. on Applied Ferroelectrics (ISAF ‘90–Illinois, 1991), p. 198.Google Scholar
8.Hakki, B. W. and Coleman, P. D., IRE Trans. on Microwave Theory and Techniques 8, 402 (1960).CrossRefGoogle Scholar
9.Iddles, D. M., Bell, A. J., and Moulson, A. J., J. Mater. Sci. 27, 1603 (1992).CrossRefGoogle Scholar
10.Tamura, H. and Katsube, M., U.S. Patent 4,242,213 (1980).Google Scholar
11.Ferreira, V. M., Baptista, J. L., Kamba, S., and Petzelt, J., J. Mater. Sci. 28, 5894 (1993).CrossRefGoogle Scholar
12.Haider, A. M. F. Y. and Edgar, A., J. Phys. C 13, 6239 (1980).CrossRefGoogle Scholar