Article contents
Theory of optimum shapes in free-surface flows. Part 1. Optimum profile of sprayless planing surface
Published online by Cambridge University Press: 29 March 2006
Abstract
This paper attempts to determine the optimum profile of a two-dimensional plate that produces the maximum hydrodynamic lift while planing on a water surface, under the condition of no spray formation and no gravitational effect, the latter assumption serving as a good approximation for operations at large Froude numbers. The lift of the sprayless planing surface is maximized under the isoperimetric constraints of fixed chord length and fixed wetted arc-length of the plate. Consideration of the extremization yields, as the Euler equation, a pair of coupled nonlinear singular integral equations of the Cauchy type. These equations are subsequently linearized to facilitate further analysis. The analytical solution of the linearized problem has a branch-type singularity, in both pressure and flow angle, at the two ends of plate. In a special limit, this singularity changes its type, emerging into a logarithmic one, which is the weakest type possible. Guided by this analytic solution of the linearized problem, approximate solutions have been calculated for the nonlinear problem using the Rayleigh-Ritz method and the numerical results compared with the linearized theory.
- Type
- Research Article
- Information
- Copyright
- © 1972 Cambridge University Press
References
- 16
- Cited by