Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-06T08:04:23.456Z Has data issue: false hasContentIssue false

Steady axisymmetric motion of deformable drops falling or rising through a homoviscous fluid in a tube at intermediate Reynolds number

Published online by Cambridge University Press:  10 April 1997

LLOYD A. BOZZI
Affiliation:
Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign, 1206 West Green Street, Urbana, IL 61801, USA
JAMES Q. FENG
Affiliation:
Chemical Technology Division, Oak Ridge National Laboratory, PO Box 2008, Oak Ridge, TN 37831, USA
TIMOTHY C. SCOTT
Affiliation:
Chemical Technology Division, Oak Ridge National Laboratory, PO Box 2008, Oak Ridge, TN 37831, USA
ARNE J. PEARLSTEIN
Affiliation:
Department of Mechanical and Industrial Engineering, University of Illinois at Urbana-Champaign, 1206 West Green Street, Urbana, IL 61801, USA

Abstract

The steady axisymmetric flow in and around a deformable drop moving under the action of gravity along the axis of a vertical tube at intermediate Reynolds number is studied by solving the nonlinear free-boundary problem using a Galerkin finite-element method. For the case where the drop and suspending liquid have the same viscosity, the ratio of the densities is 6/5 or 5/6, and the radius of the tube is equal to twice the radius of a sphere having the drop volume, four significant results are apparent in the computations. First, we compute drops showing much more deformation, and in particular the development of considerably more non-convexity, than those found in previous calculations for non-zero Reynolds number. The degree of non-convexity typically grows with the Reynolds number. Secondly, external recirculation zones can be attached to or disjoint from the drop. We find when there is a single external recirculation zone, that is disjoint (as found by Dandy & Leal), it can attach to the drop as the Reynolds number is increased. As the Reynolds number further increases, this is immediately followed by division of the drop into two adjacent recirculating regions. Thirdly, we sometimes find two recirculation zones in the suspending liquid. Finally, the drag coefficient, axis ratio, and normalized interfacial and frontal areas of the drop can vary non-monotonically with the Weber number, exhibiting as many as four local extrema. The results are compared to previous theoretical and experimental work, and implications for drop motion and heat and mass transfer are discussed.

Type
Research Article
Copyright
© 1997 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)