Article contents
On the boundary-layer structure of high-Prandtl-number horizontal convection
Published online by Cambridge University Press: 19 May 2010
Abstract
This paper describes the boundary-layer structure of the steady flow of an infinite Prandtl number fluid in a two-dimensional rectangular cavity driven by differential heating of the upper surface. The lower surface and sidewalls of the cavity are thermally insulated and the upper surface is assumed to be either shear-free or rigid. In the limit of large Rayleigh number (R → ∞), the solution involves a horizontal boundary layer at the upper surface of depth of order R−1/5 where the main variation in the temperature field occurs. For a monotonic temperature distribution at the upper surface, fluid is driven to the colder end of the cavity where it descends within a narrow convection-dominated vertical layer before returning to the horizontal layer. A numerical solution of the horizontal boundary-layer problem is found for the case of a linear temperature distribution at the upper surface. At greater depths, of order R−2/15 for a shear-free surface and order R−9/65 for a rigid upper surface, a descending plume near the cold sidewall, together with a vertically stratified interior flow, allow the temperature to attain an approximately constant value throughout the remainder of the cavity. For a shear-free upper surface, this constant temperature is predicted to be of order R−1/15 higher than the minimum temperature of the upper surface, whereas for a rigid upper surface it is predicted to be of order R−2/65 higher.
- Type
- Papers
- Information
- Copyright
- Copyright © Cambridge University Press 2010
References
REFERENCES
- 1
- Cited by