Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-29T11:07:55.810Z Has data issue: false hasContentIssue false
  • English
  • Français

Flutter instability in an internal flow energy harvester

Published online by Cambridge University Press:  12 March 2021

Luis Phillipe Tosi Open the ORCID record for Luis Phillipe Tosi [Opens in a new window] ,
Benedikt Dorschner Open the ORCID record for Benedikt Dorschner [Opens in a new window]  and
Tim Colonius
Luis Phillipe Tosi*
Affiliation:
Division of Engineering and Applied Science, California Institute of Technology, Pasadena, CA91125, USA
Benedikt Dorschner
Affiliation:
Division of Engineering and Applied Science, California Institute of Technology, Pasadena, CA91125, USA
Tim Colonius
Affiliation:
Division of Engineering and Applied Science, California Institute of Technology, Pasadena, CA91125, USA
*
†Email address for correspondence: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

Vibration-based flow energy harvesting enables robust, in situ energy extraction for low-power applications, such as distributed sensor networks. Fluid–structure instabilities dictate a harvester's viability since the structural response to the flow determines its power output. Previous work on a flextensional based flow energy harvester demonstrated that an elastic member within a converging-diverging channel is susceptible to the aeroelastic flutter. This work explores the mechanism driving flutter through experiments and simulations. A model is then developed based on channel flow rate modulation and considering the effects of both normal and spanwise flow confinement on the instability. Linear stability analysis of the model replicates flutter onset, critical frequency and mode shapes observed in experiments. The model suggests that flow modulation through the channel throat is the principal mechanism for the fluid-induced vibration. The generalized model presented can serve as the foundation of design parameter exploration for energy harvesters, perhaps leading to more powerful devices in the future, but also to other similar flow geometries where the flutter instability arises in an elastic member within a narrow flow passage.

Type
JFM Papers
Information
Journal of Fluid Mechanics , Volume 915 , 25 May 2021 , A40
Check for updates
Copyright
© The Author(s), 2021. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Alben, S. 2008 Optimal flexibility of a flapping appendage in an inviscid fluid. J. Fluid Mech. 614, 355–380.CrossRefGoogle Scholar
Alben, S. 2015 Flag flutter in inviscid channel flow. Phys. Fluids 27 (3), 033603.CrossRefGoogle Scholar
Backus, J. 1963 Small-vibration theory of the clarinet. J. Acoust. Soc. Am. 35 (3), 305–313.CrossRefGoogle Scholar
Balint, T.S. & Lucey, A.D. 2005 Instability of a cantilevered flexible plate in viscous channel flow. J. Fluids Struct. 20 (7 SPEC. ISS.), 893–912.CrossRefGoogle Scholar
Banks, H.T. & Inman, D.J. 1991 On damping mechanisms in beams. Trans. ASME: J. Appl. Mech. 58 (3), 716–723.CrossRefGoogle Scholar
Bastiaanssen, W.G.M., Molden, D.J. & Makin, I.W. 2000 Remote sensing for irrigated agriculture: examples from research and possible applications. Agric. Water Manage. 46, 137–155.CrossRefGoogle Scholar
Bernitsas, M.M., Raghavan, K., Ben-Simon, Y. & Garcia, E.M. 2008 Vivace (vortex induced vibration aquatic clean energy): a new concept in generation of clean and renewable energy from fluid flow. Trans. ASME: J. Offshore Mech. Arctic Engng 130 (4), 041101.Google Scholar
Bösch, F., Chikatamarla, S.S. & Karlin, I.V. 2015 a Entropic multirelaxation lattice Boltzmann models for turbulent flows. Phys. Rev. E 92 (4), 43309.CrossRefGoogle ScholarPubMed
Bösch, F., Chikatamarla, S.S. & Karlin, I.V. 2015 b Entropic multirelaxation models for simulation of fluid turbulence. ESAIM: Proc. Surv. 52, 1–24.CrossRefGoogle Scholar
Boston Piezo Optics Inc. 2018 Ceramic materials. Available at: https://www.bostonpiezooptics.com/ceramic-materials-pzt.Google Scholar
Canny, J. 1986 A computational approach to edge detection. IEEE Trans. Pattern Anal. Mach. Intell. PAMI-8 (6), 679–698.Google ScholarPubMed
Chandavari, V. & Palekar, S. 2014 Diffuser angle control to avoid flow separation. Intl J. Tech. Res. Appl. 2 (5), 16–21.Google Scholar
Chen, H., Kandasamy, S., Orszag, S., Shock, R., Succi, S. & Yakhot, V. 2003 Extended Boltzmann kinetic equation for turbulent flows. Science 301 (5633), 633–636.CrossRefGoogle ScholarPubMed
Cisonni, J., Lucey, A.D., Elliott, N.S.J. & Heil, M. 2017 The stability of a flexible cantilever in viscous channel flow. J. Sound Vib. 396, 186–202.CrossRefGoogle Scholar
Doaré, O., Mano, D., Carlos, J. & Ludena, B. 2011 b Effect of spanwise confinement on flag flutter: experimental measurements. Phys. Fluids 23, 1–4.CrossRefGoogle Scholar
Doaré, O., Sauzade, M. & Eloy, C. 2011 a Flutter of an elastic plate in a channel flow: confinement and finite-size effects. J. Fluids Struct. 27 (1), 76–88.CrossRefGoogle Scholar
Doll, G.L., Kotzalas, M.N. & Kang, Y.S. 2010 Life-limiting wear of wind turbine gearbox bearings: origins and solutions. In Proceedings of European Wind Energy Conference Exhibition (EWEC 2010), vol. 4.Google Scholar
Dorschner, B., Bösch, F., Chikatamarla, S.S., Boulouchos, K. & Karlin, I.V. 2016 a Entropic multi-relaxation time lattice Boltzmann model for complex flows. J. Fluid Mech. 801, 623–651.CrossRefGoogle Scholar
Dorschner, B., Chikatamarla, S.S., Bösch, F. & Karlin, I.V. 2015 Grad's approximation for moving and stationary walls in entropic lattice Boltzmann simulations. J. Comput. Phys. 295, 340–354.CrossRefGoogle Scholar
Dorschner, B., Chikatamarla, S.S. & Karlin, I.V. 2017 a Entropic multirelaxation-time lattice Boltzmann method for moving and deforming geometries in three dimensions. Phys. Rev. E 95 (6), 063306.CrossRefGoogle ScholarPubMed
Dorschner, B., Chikatamarla, S.S. & Karlin, I.V. 2017 b Transitional flows with the entropic lattice Boltzmann method. J. Fluid Mech. 824, 388–412.Google Scholar
Dorschner, B., Chikatamarla, S.S. & Karlin, I.V. 2018 Fluid–structure interaction with the entropic lattice Boltzmann method. Phys. Rev. E 97 (2), 023305.CrossRefGoogle ScholarPubMed
Dorschner, B., Frapolli, N., Chikatamarla, S.S. & Karlin, I.V. 2016 b Grid refinement for entropic lattice Boltzmann models. Phys. Rev. E 94 (5), 053311.CrossRefGoogle ScholarPubMed
Fujita, K. & Shintani, A. 1999 Flow-induced vibration of the elastic rod due to axial flow: unstable phenomena of continuous flexible rod as the axisymmetric body. PVP Flow Induced Vib. 389, 199–206.Google Scholar
Fujita, K. & Shintani, A. 2001 Axial leakage flow-induced vibration of the elastic rod as the axisymmetric continuous flexible beam. Trans. ASME: J. Press. Vessel Technol. 123 (4), 421–428.Google Scholar
Fujita, K. & Shintani, A. 2007 A consideration on pre- and post-instability of an axisymmetric elastic beam subjected to axial leakage flow. J. Fluids Struct. 23 (3), 463–478.CrossRefGoogle Scholar
Guo, C.Q. & Paidoussis, M.P. 2000 Stability of rectangular plates with free side-edges in two-dimensional inviscid channel flow. Trans. ASME: J. Appl. Mech. 67 (1), 171–176.CrossRefGoogle Scholar
Guo, H., Watson, S., Tavner, P. & Xiang, J. 2009 Reliability analysis for wind turbines with incomplete failure data collected from after the date of initial installation. Reliab. Engng Syst. Safety 94 (6), 1057–1063.Google Scholar
Gurugubelli, P.S. & Jaiman, R.K. 2019 Interaction of gap flow with flapping dynamics of two side-by-side elastic foils. Intl J. Heat Fluid Flow 75, 239–255.CrossRefGoogle Scholar
Gurugubelli, P.S., Jaiman, R.K. & Khoo, B.C. 2014 Flexible flapping dynamics of parallel elastic plates in a uniform flow: application to energy harvesting devices. In International Conference on Offshore Mechanics and Arctic Engineering, vol. 45400, p. V002T08A038.Google Scholar
Hidalgo, P., Jha, S. & Glezer, A. 2015 Enhanced heat transfer in air cooled heat sinks using aeroelastically fluttering reeds. In 2015 21st International Workshop on Thermal Investigations of ICs and Systems (THERMINIC), pp. 1–6. IEEE.CrossRefGoogle Scholar
Inada, F. & Hayama, S. 1988 A study on leakage-flow-induced vibrations. Japan Soc. Mech. Engrs Intl J. 31 (1), 39–47.Google Scholar
Inada, F. & Hayama, S. 1990 A study on leakage-flow-induced vibrations. Part 1: Fluid-dynamic forces and moments acting on the walls of a narrow tapered passage. J. Fluids Struct. 4 (4), 395–412.CrossRefGoogle Scholar
Inman, D.J. 2008 Distributed-parameter systems. In Engineering Vibration, vol. 3, chap. 6, pp. 464–538. Prentice Hall.Google Scholar
Jaiman, R.K., Parmar, M.K. & Gurugubelli, P.S. 2014 Added mass and aeroelastic stability of a flexible plate interacting with mean flow in a confined channel. Trans. ASME: J. Appl. Mech. 81 (4), 1–9.CrossRefGoogle Scholar
Johansson, E.B. 1959 Hydraulic instability of reactor parallel-plate fuel assemblies. Tech. Rep. Knolls Atomic Power Lab., USA.CrossRefGoogle Scholar
Kaltenbach, H.J., Fatica, M., Mittal, R., Lund, T.S. & Moin, P. 1999 Study of flow in a planar asymmetric diffuser using large-eddy simulation. J. Fluid Mech. 390, 151–185.CrossRefGoogle Scholar
Karlin, I.V., Bösch, F. & Chikatamarla, S.S. 2014 Gibbs’ principle for the lattice-kinetic theory of fluid dynamics. Phys. Rev. E 90 (3), 031302.CrossRefGoogle ScholarPubMed
Kundu, P.K., Cohen, I. & Dowling, D.R. 2012 Fluid Mechanics. Elsevier.Google Scholar
Lan, H., Armaly, B.F. & Drallmeier, J.A. 2009 Turbulent forced convection in a plane asymmetric diffuser: effect of diffuser angle. Trans. ASME: J. Heat Transfer 131 (7), 071702.CrossRefGoogle Scholar
Lee, H.J., Sherrit, S., Tosi, L.P. & Colonius, T. 2016 Design and experimental evaluation of flextensional-cantilever based piezoelectric transducers for flow energy harvesting. In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics.Google Scholar
Lee, H.J., Sherrit, S., Tosi, L.P., Walkemeyer, P. & Colonius, T. 2015 Piezoelectric energy harvesting in internal fluid flow. Sensors 15 (10), 26039–26062.Google ScholarPubMed
Malaspinas, O. & Sagaut, P. 2012 Consistent subgrid scale modelling for lattice Boltzmann methods. J. Fluid Mech. 700, 514–542.CrossRefGoogle Scholar
MatWeb 2018 Material property data. Available at: http://matweb.com/search/DataSheet.aspx?MatGUID=b8d536e0b9b54bd7b69e4124d8f1d20a&ckck=1.Google Scholar
Miller, D.R. 1960 Critical flow velocities for collapse of reactor parallel-plate fuel assemblies. J. Engng Power 82 (2), 83–91.CrossRefGoogle Scholar
Moran, M.J. & Shapiro, H.N. 2004 Fundamentals of Engineering Thermodynamics. John Wiley & Sons.Google Scholar
Moschitta, A. & Neri, I. 2014 Power consumption assessment in wireless sensor networks. ICT-Energy-Concepts Towards Zero-Power Information and Communication Technology.CrossRefGoogle Scholar
Nagakura, H. & Kaneko, S. 1991 The stability of a cantilever beam subjected to one-dimensional leakage flow. In Transactions of the 11th International Conference on Structural Mechanics in Reactor Technology.Google Scholar
Païdoussis, M.P. 2003 Annular- and leakage- flow-induced instabilities. In Fluid–Structure Interactions: Slender Structures and Axial Flow, Volume 2, chap. 11, pp. 1221–1420. Academic Press.Google Scholar
Rester, S., Thomas, J., Hilten, M.P.V. & Vidrine, W.L. 1999 Application of intelligent completion technology to optimize the reservoir management of a deepwater gulf of mexico field: a reservoir simulation case study. In SPE Annual Technical Conference, pp. 573–581.Google Scholar
Schmidt, O.T., Colonius, T. & Bres, G.A. 2017 Wavepacket intermittency and its role in turbulent jet noise. In 55th AIAA Aerospace Sciences Meeting, p. 0686.Google Scholar
Schmidt, O.T., Schmid, P.J., Towne, A. & Lele, S.K. 2018 Statistical description of intermittency and rare events via conditional space-time pod: example of acoustic bursts in turbulent jets. Center for Turbulence Research Annual Research Briefs.Google Scholar
Schmidt, O.T. & Towne, A. 2019 An efficient streaming algorithm for spectral proper orthogonal decomposition. Comput. Phys. Commun. 237, 98–109.CrossRefGoogle Scholar
Sharma, A.K., et al. . 2002 Quantifying value creation from intelligent completion technology implementation. In European Petroleum Conference. Society of Petroleum Engineers.CrossRefGoogle Scholar
Sherrit, S., Frankovich, K., Bao, X. & Tucker, C. 2009 Miniature piezoelectric shaker mechanism for autonomous distribution of unconsolidated sample to instrument cells. In Industrial and Commercial Applications of Smart Structures Technologies, vol. 7290, p. 72900H. International Society for Optics and Photonics.CrossRefGoogle Scholar
Sherrit, S., et al. . 2014 Flow energy piezoelectric bimorph nozzle harvester. In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics.CrossRefGoogle Scholar
Sherrit, S., Lee, H.J., Walkemeyer, P., Winn, T., Tosi, L.P. & Colonius, T. 2015 Fluid flow nozzle energy harvesters. In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics.CrossRefGoogle Scholar
Shoele, K. & Mittal, R. 2016 Flutter instability of a thin flexible plate in a channel. J. Fluid Mech. 786, 29–46.CrossRefGoogle Scholar
Sommerfeldt, S.D. & Strong, W.J. 1988 Simulation of a player–clarinet system. J. Acoust. Soc. Am. 83 (5), 1908–1918.CrossRefGoogle Scholar
Tetlow, G.A. & Lucey, A.D. 2009 Motions of a cantilevered flexible plate in viscous channel flow driven by a constant pressure drop. Intl J. Numer. Meth. Biomed. Engng 25 (5), 463–482.Google Scholar
Tian, F.B., Dai, H., Luo, H., Doyle, J.F. & Rousseau, B. 2014 Fluid–structure interaction involving large deformations: 3D simulations and applications to biological systems. J. Comput. Phys. 258, 451–469.CrossRefGoogle Scholar
Tong, W. 2010 Wind Power Generation and Wind Turbine Design. Wit Press.Google Scholar
Törnblom, O., Lindgren, B. & Johansson, A.V. 2009 The separating flow in a plane asymmetric diffuser with 8.5 opening angle: mean flow and turbulence statistics, temporal behaviour and flow structures. J. Fluid Mech. 636, 337–370.CrossRefGoogle Scholar
Tosi, L.P. 2019 Fluid–structure stability in an internal flow energy harvester. PhD thesis, California Institute of Technology.Google Scholar
Tosi, L.P. & Colonius, T. 2019 Modeling and simulation of a fluttering cantilever in channel flow. J. Fluids Struct. 89, 174–190.CrossRefGoogle Scholar
Towne, A., Schmidt, O.T. & Colonius, T. 2018 Spectral proper orthogonal decomposition and its relationship to dynamic mode decomposition and resolvent analysis. J. Fluid Mech. 847, 821–867.CrossRefGoogle Scholar
Welch, P. 1967 The use of fast fourier transform for the estimation of power spectra: a method based on time averaging over short, modified periodograms. IEEE Trans. Audio Electroacoust. 15 (2), 70–73.CrossRefGoogle Scholar
Wen, B., Zhang, C. & Fang, H. 2015 Hydrodynamic force evaluation by momentum exchange method in lattice Boltzmann simulations. Entropy 17 (12), 8240–8266.CrossRefGoogle Scholar
Wood, M.H., Arellano, A.L.V. & Lorenzo, V. 2013 Corrosion Related Accidents in Petroleum Refineries. European Commission Joint Research Centre.Google Scholar
Wu, X. & Kaneko, S. 2005 Linear and nonlinear analyses of sheet flutter induced by leakage flow. J. Fluids Struct. 20 (7), 927–948.CrossRefGoogle Scholar
Zhou, G., Huang, L., Li, W. & Zhu, Z. 2014 Harvesting ambient environmental energy for wireless sensor networks: a survey. J. Sensors 2014, 815467.CrossRefGoogle Scholar
Zhu, D. 2011 Vibration energy harvesting: machinery vibration, human movement and flow induced vibration. In Sustainable Energy Harvesting Technologies – Past, Present and Future (ed. Tan, Y.K.), vol. 1, pp. 22–54. IntechOpen.Google Scholar