Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Laneville, A.
and
Trepanier, J.Y.
1986.
Blockage effects in smooth and turbulent flows: The case of two-dimensional rectangular cylinders.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 22,
Issue. 2-3,
p.
169.
Parkinson, G.V.
1986.
A residual boundary correction theory for the tolerant wind tunnel.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 22,
Issue. 2-3,
p.
177.
Nakamura, Yasuharu
and
Matsukawa, Tohru
1987.
Vortex excitation of rectangular cylinders with a long side normal to the flow.
Journal of Fluid Mechanics,
Vol. 180,
Issue. -1,
p.
171.
NAKAMURA, Y.
OHYA, Y.
and
OZONO, S.
1988.
Advances in Wind Engineering.
p.
251.
Roy, R.J.
and
Holmes, J.D.
1988.
The effects of scale distortion on total wind loads on a low rise building model.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 29,
Issue. 1-3,
p.
273.
Nakamura, Y.
Ohya, Y.
and
Ozono, S.
1988.
The effects of turbulence on bluff-body mean flow.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 28,
Issue. 1-3,
p.
251.
Laneville, André
1990.
Turbulence and blockage effects on two dimensional rectangular cylinders.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 33,
Issue. 1-2,
p.
11.
Nakagawa, T.
1990.
Vortex formation mechanism behind the rectangular prism with depth to height ratio of 0.675.
Experimental Thermal and Fluid Science,
Vol. 3,
Issue. 3,
p.
323.
Knisely, C.W.
1990.
Strouhal numbers of rectangular cylinders at incidence: A review and new data.
Journal of Fluids and Structures,
Vol. 4,
Issue. 4,
p.
371.
Cheng, C.M.
Lu, P.C.
and
Chen, R.H.
1992.
Wind loads on square cylinder in homogeneous turbulent flows.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 41,
Issue. 1-3,
p.
739.
Melbourne, W.H.
1993.
Turbulence and the leading edge phenomenon.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 49,
Issue. 1-3,
p.
45.
Nakamura, Y.
1993.
Bluff-body aerodynamics and turbulence.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 49,
Issue. 1-3,
p.
65.
Norberg, C.
1993.
Flow around rectangular cylinders: Pressure forces and wake frequencies.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 49,
Issue. 1-3,
p.
187.
Wolochuk, Mark C.
Braun, James E.
and
Plesniak, Michael W.
1995.
Evaluation of Vortex-Shedding Flow Meters for Monitoring Air Flows in HVAC Applications.
HVAC&R Research,
Vol. 1,
Issue. 4,
p.
282.
Wolochuk, M. C.
Plesniak, M. W.
and
Braun, J. E.
1996.
The Effects of Turbulence and Unsteadiness on Vortex Shedding From Sharp-Edged Bluff Bodies.
Journal of Fluids Engineering,
Vol. 118,
Issue. 1,
p.
18.
Lu, Po-Chien
Cheng, Chii-Meng
and
Kao, Chung-Ren
1997.
THE EFFECTS OF TURBULENCE ON MEAN FLOW PAST FIXED AND OSCILLATING RECTANGULAR PRISMS.
Journal of the Chinese Institute of Engineers,
Vol. 20,
Issue. 6,
p.
615.
Saathoff, P.
and
Melbourne, W.H.
1999.
Effects of freestream turbulence on streamwise pressure measured on a square-section cylinder.
Journal of Wind Engineering and Industrial Aerodynamics,
Vol. 79,
Issue. 1-2,
p.
61.
Li, Q.S.
and
Melbourne, W.H.
1999.
Turbulence effects on surface pressures of rectangular cylinders.
Wind and Structures,
Vol. 2,
Issue. 4,
p.
253.
Piquet, Jean
1999.
Turbulent Flows.
p.
471.
Modi, V.
2000.
On the moving surface boundary-layer control.