Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-28T22:24:01.205Z Has data issue: false hasContentIssue false

Direct numerical simulation of compressible turbulent channel flow between adiabatic and isothermal walls

Published online by Cambridge University Press:  01 March 2004

Y. MORINISHI
Affiliation:
Department of Mechanical Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya-shi, Aichi-ken, 466-8555 Japan
S. TAMANO
Affiliation:
Department of Mechanical Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya-shi, Aichi-ken, 466-8555 Japan
K. NAKABAYASHI
Affiliation:
Department of Mechanical Systems Engineering, Aichi University of Technology, Manori, Nishihasama-cho, Gamagori-shi, Aichi-ken, 443-0047 Japan

Extract

In this paper, the effects of adiabatic and isothermal conditions on the statistics in compressible turbulent channel flow are investigated using direct numerical simulation (DNS). DNS of two compressible turbulent channel flows (Cases 1 and 2) are performed using a mixed Fourier Galerkin and B-spline collocation method. Case 1 is compressible turbulent channel flow between isothermal walls, which corresponds to DNS performed by Coleman et al. (1995). Case 2 is the flow between adiabatic and isothermal walls. The flow of Case 2 can be a very useful framework for the present objective, since it is the simplest turbulent channel flow with an adiabatic wall and provides ideal information for modelling the compressible turbulent flow near the adiabatic wall. Note that compressible turbulent channel flow between adiabatic walls is not stationary if there is no sink of heat. In Cases 1 and 2, the Mach number based on the bulk velocity and sound speed at the isothermal wall is 1.5, and the Reynolds number based on the bulk density, bulk velocity, channel half-width, and viscosity at the isothermal wall is 3000.

To compare compressible and incompressible turbulent flows, DNS of two incompressible turbulent channel flows with passive scalar transport (Cases A and B) are performed using a mixed Fourier Galerkin and Chebyshev tau method. The wall boundary conditions of Cases A and B correspond to those of Cases 1 and 2, respectively. Case A corresponds to the DNS of Kim & Moin (1989). In Cases A and B, the Reynolds number based on the friction velocity, the channel half-width, and the kinematic viscosity is 150.

The mean velocity and temperature near adiabatic and isothermal walls for compressible turbulent channel flow can be explained using the non-dimensional heat flux and the friction Mach number. It is found that Morkovin's hypothesis is not applicable to the near-wall asymptotic behaviour of the wall-normal turbulence intensity even if the variable property effect is taken into account. The mechanism of the energy transfers among the internal energy, mean and turbulent kinetic energiesis investigated, and the difference between the energy transfers near isothermal and adiabatic walls is revealed. Morkovin's hypothesis is not applicable to the correlation coeffcient between velocity and temperature fluctuations near the adiabatic wall.

Type
Papers
Copyright
© 2004 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)