Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-26T09:05:43.727Z Has data issue: false hasContentIssue false
  • English
  • Français

Combustion enhancement in a scramjet engine using oxygen enrichment and porous fuel injection

Published online by Cambridge University Press:  12 February 2015

Bianca R. Capra ,
R. R. Boyce ,
M. Kuhn  and
H. Hald
Bianca R. Capra*
Affiliation:
School of Chemistry, Physics and Mechanical Engineering, Queensland University of Technology, 2 George St, GPO Box 2434, Brisbane, QLD 4001, Australia
R. R. Boyce
Affiliation:
University of New South Wales, Canberra, PO Box 7916, Canberra, BC 2610, Australia
M. Kuhn
Affiliation:
Space Systems Integration, Institute of Structures and Design, German Aerospace Center (DLR) Pfaffenwaldring 38-40, 70569, Germany
H. Hald
Affiliation:
Space Systems Integration, Institute of Structures and Design, German Aerospace Center (DLR) Pfaffenwaldring 38-40, 70569, Germany
*
†Email address for correspondence: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper reports on the experimental testing of oxygen-enriched porous fuel injection in a scramjet engine. Fuel was injected via inlet mounted, oxide-based ceramic matrix composite (CMC) injectors on both flow path surfaces that covered a total of 9.2 % of the intake surface area. All experiments were performed at an enthalpy of $3.93{-}4.25\pm 3.2\,\%~\text{MJ}~\text{kg}^{-1}$, flight Mach number 9.2–9.6 and an equivalence ratio of $0.493\pm 3\,\%$. At this condition, the engine was shown to be on the verge of achieving appreciable combustion. Oxygen was then added to the fuel prior to injection such that two distinct enrichment levels were achieved. Combustion was found to increase, by as much as 40 % in terms of combustion-induced pressure rise, over the fuel-only case with increasing oxygen enrichment. Further, the onset of combustion was found to move upstream with increasing levels of oxygen enrichment. Thrust, both uninstalled and specific, and specific impulse were found to be improved with oxygen enrichment. Enhanced fuel–air mixing due to the pre-mixing of oxygen with the fuel together with the porous fuel injection are believed to be the main contributors to the observed enhanced performance of the tested engine.

JFM classification

Reacting Flows: Combustion Aerodynamics: High-speed flow Low-Reynolds-number flows: Porous media
Type
Papers
Information
Journal of Fluid Mechanics , Volume 767 , 25 March 2015 , pp. 173 - 198
Check for updates
Copyright
© 2015 Cambridge University Press 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Anderson, J. D. 2003 Modern Compressible Flow with Historical Perspective, 3rd edn. McGraw-Hill.Google Scholar
Ben-Yaker, A., Mungal, M. G. & Hanson, R. K. 2006 Time evolution and mixing characteristics of hydrogen and ethylene transverse jets in supersonic crossflows. Phys. Fluids 18, 026101.Google Scholar
Boyce, R. R., Schloegel, F., McIntyre, T. J. & Tirtey, S. C. 2011 Pressure-scaling of inlet-injection radical-farming scramjets. In International Symposium on Airbreathing Engines, Gothenburg, Sweden, vol. 2, pp. 1322–1332. AIAA.Google Scholar
Boyce, R. R., Takahashi, M. & Stalker, R. J. 2005 Mass spectrometric measurements of driver gas arrival in the T4 free-piston shock tunnel. Shock Waves J. 14 (5–6), 371–378.CrossRefGoogle Scholar
Brieschenk, S., Capra, B. R., Lorrain, P., McIntyre, T. J. & Boyce, R. R.2012 Chemiluminescence imaging in supersonic combustors operating in radical-farming mode. In 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference, Tours, France, AIAA paper 2012-5854.Google Scholar
Capra, B. R., Boyce, R. R., Kuhn, M. & Hald, H. 2015 Porous versus porthole fuel injection in a radical farming scramjet: a numerical analysis. AIAA J. Propul. Power (in press).Google Scholar
Gardner, A. D., Paull, A. & McIntyre, T. J. 2002 Upstream porthole injection in a 2-d scramjet model. Shock Waves 11, 369–375.Google Scholar
Gascoin, N., Fau, G., Kuhn, M., Bouchez, M. & Steelant, J. 2012 Comparison of two permeation test benches and two determination methods for Darcy’s and Forchheimer’s permeabilities. J. Porous Media 15 (8), 705–720.Google Scholar
Gordon, W. E.1962 The relative importance of density, specific impulse and other solid propellant properties in the frame of long-term research goals. Tech. Rep. AD283940. Armed Services Technical Information Agency, Institute for Defence Analyses.Google Scholar
Hald, H., Herbertz, A., Ortelt, M. & Kuhn, M.2009 Technological aspect of transpiration cooled composite structures for thrust chamber applications. In 16th AIAA/DLR/DGLR International Space Planes and Hypersonic Systems and Technologies Conference, 2009, AIAA paper 2009-7222.Google Scholar
Heiser, W. H. & Pratt, D. T. 1994 Hypersonic Airbreathing Propulsion. AIAA.CrossRefGoogle Scholar
Kovachevich, A., Paull, A. & McIntyre, T. J.2004 Investigation of an intake injected hot-wall scramjet. In 42nd AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, USA, AIAA paper 2004-1037.Google Scholar
Langener, T., von Wolfersdorf, J. & Steelant, J. 2011 Experimental investigations on transpiration cooling for scramjet applications using different coolants. AIAA J. 49 (7), 1409–1419.CrossRefGoogle Scholar
Lordi, J. A., Mates, R. E. & Moselle, J. R.1966 Computer program for the numerical solution of nonequilibrium expansion of reacting gas mixtures. NASA Contractor Rep. NASA-CR-472. Cornell Aeronautical Laboratory Inc, Buffalo, NY.Google Scholar
Lorrain, P., Brieschecnk, S. & Boyce, R. R. 2013 Experimental investigation of inlet-injection radical-farming scramjet combustion. In ISABE-2013-1610, 21st International Symposium on Air Breathing Engines, Busan, Korea, vol. 3, pp. 1417–1425. AIAA.Google Scholar
Lorrain, P., Brieschecnk, S., Capra, B. R. & Boyce, R. R.2012 A detailed investigation of nominally 2d radical farming scramjet combustion. In 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference, Tours, France, AIAA paper 2012-5812.Google Scholar
McGuire, J. R., Boyce, R. R. & Mudford, N. R. 2008 Radical-farming ignition processes in two-dimensional supersonic combustion. J. Propul. Power 24 (6), 1248–1257.Google Scholar
Nield, D. A. & Bejan, A. 2006 Convection in Porous Media, 3rd edn. Springer.Google Scholar
Odam, J.2004 Scramjet experiments using radical farming. PhD thesis, The University of Queensland.Google Scholar
Odam, J. & Paull, A. 2007 Radical farming in scramjets. In New Results in Numerical and Experimental Fluid Mechanics VI, Notes on Numerical Fluid Mechanics and Multidisciplinary Design (ed. Tropea, C., Jakirlic, S., Heinemann, H.-J., Henke, R. & Hönlinger, H.), vol. 96, pp. 276–283. Springer.Google Scholar
Paull, A. & Stalker, R. J.1998 Scramjet testing in the T4 impulse facility. In AIAA 8th Spaceplanes and Hypersonic Systems and Technologies Conference.Google Scholar
Petty, D. J., Wheatley, V., Smart, M. K. & Razzaqi, S. 2013 Effects of oxygen enrichment on scramjet performance. AIAA J. 51 (1), 226–235.CrossRefGoogle Scholar
Pike, J. 1999 The choice of propellants: a similarity analysis of scramjet second stages. Phil. Trans. R. Soc. Lond. 357 (1759), 2357–2378.CrossRefGoogle Scholar
Portwood, T. W.2006 Enhancement of hydrocarbon supersonic combustion by radical farming and oxygen enrichment. Master’s thesis, The University of Queensland, St Lucia, Queensland, Australia.Google Scholar
Razzaqi, S. A. & Smart, M. K. 2011 Hypervelocity experiments on oxygen enrichment in a hydrogen-fueled scramjet. AIAA J. 49 (7), 1488–1497.Google Scholar
Rudakov, A. S. & Krjutchenko, V. V.1990 Additional fuel component application for hydrogen scramjet boosting. In SAE Aerospace Atlantic Conference and Exposition, Dayton, OH, USA.Google Scholar
Schloegel, F., Boyce, R. R., McIntyre, T. J. & Tirtey, S.2012 Combustion scaling in an inlet injection scramjet. In 18th AIAA/3AF International Space Planes and Hypersonic Systems and Technologies Conference, Tours, France, AIAA paper 2012-5811.Google Scholar
Schroeder, V. & Holtappels, K.2005 Explosion characteristics of hydrogen–air and hydrogen–oxygen mixtures at elevated pressures. In Conference on Hydrogen Safety, Pisa, Italy.Google Scholar
Smart, M. K. & Tetlow, M. R. 2009 Orbital delivery of small payloads using hypersonic airbreathing propulsion. J. Spacecr. Rockets 46 (1), 117–125.Google Scholar
Stalker, R. J. 1967 A study of the free-piston shock tunnel. AIAA J. 5 (12), 2160–2165.Google Scholar
Tanimizu, K.2008 Nozzle optimization study and measurements for a quasi-axisymmetric scramjet model. PhD thesis, Division of Mechanical Engineering, The University of Queensland.Google Scholar
US Standard Atmosphere 1976 NASA-TM-X-74335. National Oceanic and Atmospheric Administration, National Aeronautics and Space Administration, United Air Force, Washington, DC.Google Scholar
Viti, V., Neel, R. & Schetz, J. A. 2009 Detailed flow physics of the supersonic jet interaction flow field. Phys. Fluids 21 (4), 046101.Google Scholar