Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-29T13:51:58.079Z Has data issue: false hasContentIssue false
  • English
  • Français

Numerical study of flow-induced vibration of a circular cylinder with attached flexible splitter plate at low $Re$

Published online by Cambridge University Press:  10 October 2019

Tulsi Ram Sahu ,
Mohd Furquan  and
Sanjay Mittal Open the ORCID record for Sanjay Mittal [Opens in a new window]
Tulsi Ram Sahu
Affiliation:
Department of Aerospace Engineering, Indian Institute of Technology Kanpur, Kanpur, UP 208016, India
Mohd Furquan
Affiliation:
Department of Aerospace Engineering, Indian Institute of Technology Kanpur, Kanpur, UP 208016, India
Sanjay Mittal*
Affiliation:
Department of Aerospace Engineering, Indian Institute of Technology Kanpur, Kanpur, UP 208016, India
*
†Email address for correspondence: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

Flow-induced vibration (FIV) of an elastically mounted circular cylinder with an attached splitter plate in uniform flow is studied numerically via a stabilized space–time finite element method. The Reynolds number based on the cylinder diameter $D$ and the free-stream speed is restricted to 150. The ratio of the density of the body to that of the fluid, for the major part of the study, is 10. Two different reduced speeds are defined to quantify the compliance of the elastic support and flexibility of the splitter plate, respectively: $U_{s}^{\ast }$ based on the natural frequency of the spring–mass system and $U_{p}^{\ast }$ based on the fundamental natural frequency of the plate. Flow past a stationary cylinder ($U_{s}^{\ast }=0$) with a flexible splitter plate of length $3.5D$ is studied at different values of $U_{p}^{\ast }$. The vibration response of the plate exhibits lock-in with various eigenmodes of the plate in different ranges of $U_{p}^{\ast }$. The onsets of these lock-in regions are abrupt and hysteretic. The elastically mounted cylinder, without the splitter plate, undergoes large-amplitude vortex-induced vibration (VIV) for $4<U_{s}^{\ast }<7$. These large-amplitude oscillations are a consequence of synchronization, wherein the vortex shedding frequency locks in to the cylinder oscillation frequency. A rigid splitter plate attached to the cylinder reduces significantly the peak amplitude during VIV. Increasing the length of the plate from $1.5D$ to $3.5D$ only marginally affects the peak amplitude. It, however, leads to a wider range of lock-in. Unlike the case of an isolated cylinder, the lock-in and desynchronization regimes are not well demarcated in the presence of the splitter plate. Further, galloping is observed beyond a critical value of $U_{s}^{\ast }$; the amplitude of vibration increases with an increase in $U_{s}^{\ast }$ while the vibration frequency is relatively low and remains nearly constant. Increase in plate length delays, in terms of $U_{s}^{\ast }$, the onset of galloping. It is also found that the flexibility of the plate affects the maximum oscillation amplitude in the VIV regime. It also dictates the presence/absence of galloping. The system behaves similar to an isolated cylinder for a very flexible plate. The response is devoid of galloping, but relatively large amplitude of oscillation is observed during lock-in. The behaviour of the cylinder with a stiff plate is similar to that with the rigid one. The galloping instability sets in when the flexibility of the plate is less than a certain value ($U_{p}^{\ast }<4.7$, approximately for $U_{s}^{\ast }=22$). The VIV and galloping are separated by a range of $U_{s}^{\ast }$ in which the flow is either steady, for longer plates, or exhibits very weak vortex shedding. In the VIV regime, the plate tip and cylinder vibrate in phase for low $U_{p}^{\ast }$; their motion is out of phase for larger $U_{p}^{\ast }$. The change in phase is also associated with change in the frequency of vibration. At low $U_{p}^{\ast }$, the frequency of vibration is close to the first natural frequency of the system, while at high $U_{p}^{\ast }$ it becomes closer to the second natural frequency. The vibration amplitude of the cylinder is close to maximum in the VIV regime for $U_{s}^{\ast }=6$. Computations for various $U_{p}^{\ast }$, for $U_{s}^{\ast }=6$ and $22$, are utilized to determine optimal flexibility that leads to minimal FIV. The effect of the length of the flexible splitter plate, mass ratio and damping ratio is studied. A strategy is proposed to utilize the computations from various combinations of $U_{s}^{\ast }$ and $U_{p}^{\ast }$ to choose the appropriate flexibility of the attached splitter plate to minimize FIV.

JFM classification

Wakes/Jets: Vortex streets Vortex Flows: Vortex shedding
Type
JFM Papers
Information
Journal of Fluid Mechanics , Volume 880 , 10 December 2019 , pp. 551 - 593
Copyright
© 2019 Cambridge University Press 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Amman, O. H., von Kármán, T. & Woodruff, G. B.1941 The failure of the Tacoma Narrows bridge. Tech. Rep., Federal Works Agency, Washington, DC.Google Scholar
Anagnostopoulos, P.(Ed.) 2002 Flow-Induced Vibrations in Engineering Practice, Advances in Fluid Mechanics, vol. 31. WIT Press.Google Scholar
Anagnostopoulos, P. & Bearman, P. W. 1992 Response characteristics of a vortex-excited cylinder at low Reynolds numbers. J. Fluids Struct. 6 (1), 39–50.Google Scholar
Anderson, E. A. & Szewczyk, A. A. 1997 Effects of a splitter plate on the near wake of a circular cylinder in 2 and 3-dimensional flow configurations. Exp. Fluids 23 (2), 161–174.Google Scholar
Apelt, C. J. & West, G. S. 1975 The effects of wake splitter plates on bluff-body flow in the range 104 < R < 5 × 104 . Part 2. J. Fluid Mech. 71 (1), 145–160.Google Scholar
Apelt, C. J., West, G. S. & Szewczyk, A. A. 1973 The effects of wake splitter plates on the flow past a circular cylinder in the range 104 < R < 5 × 104 . J. Fluid Mech. 61 (1), 187–198.Google Scholar
Aronson, D. G., Ermentrout, G. B. & Kopell, N. 1990 Amplitude response of coupled oscillators. Physica D 41 (3), 403–449.Google Scholar
Assi, G. R. S. & Bearman, P. W. 2015 Transverse galloping of circular cylinders fitted with solid and slotted splitter plates. J. Fluids Struct. 54, 263–280.Google Scholar
Assi, G. R. S., Bearman, P. W. & Kitney, N. 2009 Low drag solutions for suppressing vortex-induced vibration of circular cylinders. J. Fluids Struct. 25 (4), 666–675.Google Scholar
Bahmani, M. H. & Akbari, M. H. 2010 Effects of mass and damping ratios on VIV of a circular cylinder. Ocean Engng 37 (5-6), 511–519.Google Scholar
Bao, Y. & Tao, J. 2013 The passive control of wake flow behind a circular cylinder by parallel dual plates. J. Fluids Struct. 37, 201–219.Google Scholar
Barkley, D. & Henderson, R. D. 1996 Three-dimensional Floquet stability analysis of the wake of a circular cylinder. J. Fluid Mech. 322, 215–241.Google Scholar
Bazilevs, Y., Takizawa, K. & Tezduyar, T. E. 2013 Computational Fluid–Structure Interaction: Methods and Applications. Wiley.Google Scholar
Bearman, P. W. 1984 Vortex shedding from oscillating bluff bodies. Annu. Rev. Fluid Mech. 16 (1), 195–222.Google Scholar
Bearman, P. W. 2011 Circular cylinder wakes and vortex-induced vibrations. J. Fluids Struct. 27 (5), 648–658.Google Scholar
Bernitsas, M. M., Ben-Simon, Y., Raghavan, K. & Garcia, E. M. 2009 The VIVACE converter: model tests at high damping and Reynolds number around 105 . J. Offshore Mech. Arctic Engng 131 (1), 011102.Google Scholar
Bernitsas, M. M., Raghavan, K., Ben-Simon, Y. & Garcia, E. M. 2008 VIVACE (Vortex Induced Vibration Aquatic Clean Energy): a new concept in generation of clean and renewable energy from fluid flow. J. Offshore Mech. Arctic Engng 130 (4), 041101.Google Scholar
Bishop, R. E. D. & Hassan, A. Y. 1964 The lift and drag forces on a circular cylinder oscillating in a flowing fluid. Proc. R. Soc. Lond. A 277 (1368), 51–75.Google Scholar
Blevins, R. D. 1990 Flow-Induced Vibration. Van Nostrand Reinhold Co., Inc.Google Scholar
Blevins, R. D. & Coughran, C. S. 2009 Experimental investigation of vortex-induced vibration in one and two dimensions with variable mass, damping, and Reynolds number. J. Fluids Engng 131 (10), 101202.Google Scholar
Brika, D. & Laneville, A. 1993 Vortex-induced vibrations of a long flexible circular cylinder. J. Fluid Mech. 250, 481–508.Google Scholar
Brooks, A. N. & Hughes, T. J. R. 1982 Streamline upwind/Petrov–Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier–Stokes equations. Comput. Meth. Appl. Mech. Engng 32 (1), 199–259.Google Scholar
Choi, H., Jeon, W.-P. & Kim, J. 2008 Control of flow over a bluff body. Annu. Rev. Fluid Mech. 40, 113–139.Google Scholar
Dhondt, G. 2004 The Finite Element Method for Three-Dimensional Thermomechanical Applications. Wiley.Google Scholar
Dhondt, G. & Wittig, K.1998 Calculix: a free software three-dimensional structural finite element program. Available at: http://www.calculix.de/.Google Scholar
Furquan, M. & Mittal, S. 2015 Flow past two square cylinders with flexible splitter plates. Comput. Mech. 55 (6), 1155–1166.Google Scholar
Gomes, J. P. & Lienhart, H. 2013 Fluid–structure interaction-induced oscillation of flexible structures in laminar and turbulent flows. J. Fluid Mech. 715, 537–572.Google Scholar
Gomes, J. P., Yigit, S., Lienhart, H. & Schäfer, M. 2011 Experimental and numerical study on a laminar fluid–structure interaction reference test case. J. Fluids Struct. 27 (1), 43–61.Google Scholar
Gad-el Hak, M. 1989 Flow control. Appl. Mech. Rev. 42 (10), 261–293.Google Scholar
Hwang, J.-Y., Yang, K.-S. & Sun, S.-H. 2003 Reduction of flow-induced forces on a circular cylinder using a detached splitter plate. Phys. Fluids 15 (8), 2433–2436.Google Scholar
Johnson, A. A. & Tezduyar, T. E. 1994 Mesh update strategies in parallel finite element computations of flow problems with moving boundaries and interfaces. Comput. Meth. Appl. Mech. Engng 119 (1), 73–94.Google Scholar
Kalro, V. & Tezduyar, T. E. 2000 A parallel 3D computational method for fluid–structure interactions in parachute systems. Comput. Meth. Appl. Mech. Engng 190 (3), 321–332.Google Scholar
Kawai, H. 1990 A discrete vortex analysis of flow around a vibrating cylinder with a splitter plate. J. Wind Engng Ind. Aerodyn. 35, 259–273.Google Scholar
Khalak, A. & Williamson, C. H. K. 1997 Investigation of relative effects of mass and damping in vortex-induced vibration of a circular cylinder. J. Wind Engng Ind. Aerodyn. 69–71, 341–350; Proceedings of the 3rd International Colloqium on Bluff Body Aerodynamics and Applications.Google Scholar
Khalak, A. & Williamson, C. H. K. 1999 Motions, forces and mode transitions in vortex-induced vibrations at low mass-damping. J. Fluids Struct. 13 (7–8), 813–851.Google Scholar
Klamo, J. T., Leonard, A. & Roshko, A. 2006 The effects of damping on the amplitude and frequency response of a freely vibrating cylinder in cross-flow. J. Fluids Struct. 22 (6-7), 845–856.Google Scholar
Kumar, S. N. & Mittal, S. 2016 Lock-in in forced vibration of a circular cylinder. Phys. Fluids 28 (11), 113605.Google Scholar
Kundu, A., Soti, A. K., Bhardwaj, R. & Thompson, M. C. 2017 The response of an elastic splitter plate attached to a cylinder to laminar pulsatile flow. J. Fluids Struct. 68, 423–443.Google Scholar
Kwon, K. & Choi, H. 1996 Control of laminar vortex shedding behind a circular cylinder using splitter plates. Phys. Fluids 8 (2), 479–486.Google Scholar
Lācis, U., Brosse, N., Ingremeau, F., Mazzino, A., Lundell, F., Kellay, H. & Bagheri, S. 2014 Passive appendages generate drift through symmetry breaking. Nat. Commun. 5, 5310.Google Scholar
Law, Y. Z. & Jaiman, R. K. 2017 Wake stabilization mechanism of low-drag suppression devices for vortex-induced vibration. J. Fluids Struct. 70, 428–449.Google Scholar
Lee, J. & You, D. 2013 Study of vortex-shedding-induced vibration of a flexible splitter plate behind a cylinder. Phys. Fluids 25 (11), 110811.Google Scholar
Leontini, J. S., Thompson, M. C. & Hourigan, K. 2007 Three-dimensional transition in the wake of a transversely oscillating cylinder. J. Fluid Mech. 577, 79–104.Google Scholar
Li, S. & Sun, Z. 2015 Harvesting vortex energy in the cylinder wake with a pivoting vane. Energy 88, 783–792.Google Scholar
Liang, S., Wang, J. & Hu, Z. 2018 VIV and galloping response of a circular cylinder with rigid detached splitter plates. Ocean Engng 162, 176–186.Google Scholar
Mannini, C., Marra, A. & Bartoli, G. 2014 VIV–galloping instability of rectangular cylinders: Review and new experiments. J. Wind Engng Ind. Aerodyn. 132, 109–124.Google Scholar
Min, C. & Choi, H. 1999 Suboptimal feedback control of vortex shedding at low Reynolds numbers. J. Fluid Mech. 401, 123–156.Google Scholar
Mittal, S. 2000 On the performance of high aspect ratio elements for incompressible flows. Comput. Meth. Appl. Mech. Engng 188 (1), 269–287.Google Scholar
Mittal, S. 2001 Control of flow past bluff bodies using rotating control cylinders. J. Fluids Struct. 15 (2), 291–326.Google Scholar
Mittal, S. 2003 Effect of a slip splitter plate on vortex shedding from a cylinder. Phys. Fluids 15 (3), 817–820.Google Scholar
Mittal, S. & Kumar, B. 2003 Flow past a rotating cylinder. J. Fluid Mech. 476, 303–334.Google Scholar
Mittal, S. & Kumar, V. 1999 Finite element study of vortex-induced cross-flow and in-line oscillations of a circular cylinder at low Reynolds numbers. Intl J. Numer. Meth. Fluids 31 (7), 1087–1120.Google Scholar
Mittal, S. & Raghuvanshi, A. 2001 Control of vortex shedding behind circular cylinder for flows at low Reynolds numbers. Intl J. Numer. Meth. Fluids 35 (4), 421–447.Google Scholar
Nakamura, Y., Hirata, K. & Kashima, K. 1994 Galloping of a circular cylinder in the presence of a splitter plate. J. Fluids Struct. 8 (4), 355–365.Google Scholar
Navrose, M. J. & Mittal, S. 2015 Three-dimensional flow past a rotating cylinder. J. Fluid Mech. 766, 28–53.Google Scholar
Navrose & Mittal, S. 2016 Lock-in in vortex-induced vibration. J. Fluid Mech. 794, 565–594.Google Scholar
Navrose & Mittal, S. 2017a The critical mass phenomenon in vortex-induced vibration at low Re . J. Fluid Mech. 820, 159–186.Google Scholar
Navrose & Mittal, S. 2017b A new regime of multiple states in free vibration of a cylinder at low Re . J. Fluids Struct. 68, 310–321.Google Scholar
Ozono, S. 1999 Flow control of vortex shedding by a short splitter plate asymmetrically arranged downstream of a cylinder. Phys. Fluids 11 (10), 2928–2934.Google Scholar
Prasanth, T. K. & Mittal, S. 2008 Vortex-induced vibrations of a circular cylinder at low Reynolds numbers. J. Fluid Mech. 594, 463–491.Google Scholar
Prasanth, T. K., Premchandran, V. & Mittal, S. 2011 Hysteresis in vortex-induced vibrations: critical blockage and effect of m . J. Fluid Mech. 671, 207–225.Google Scholar
Rao, S. S. 2011 Mechanical Vibrations, 5th edn. Prentice-Hall.Google Scholar
Roshko, A.1954 On the drag and shedding frequency of two-dimensional bluff bodies. Tech. Rep. National Advisory Committee for Aeronautics.Google Scholar
Roshko, A. 1955 On the wake and drag of bluff bodies. J. Aero. Sci. 22 (2), 124–132.Google Scholar
Sahu, T. R., Furquan, M., Jaiswal, Y. & Mittal, S. 2019 Flow-induced vibration of a circular cylinder with rigid splitter plate. J. Fluids Struct. 89, 244–256.Google Scholar
Sarpkaya, T. 2004 A critical review of the intrinsic nature of vortex-induced vibrations. J. Fluids Struct. 19 (4), 389–447.Google Scholar
Sen, S. & Mittal, S. 2011 Free vibration of a square cylinder at low Reynolds numbers. J. Fluids Struct. 27 (5), 875–884.Google Scholar
Shiels, D. & Leonard, A. 2001 Investigation of a drag reduction on a circular cylinder in rotary oscillation. J. Fluid Mech. 431, 297–322.Google Scholar
Shukla, S., Govardhan, R. N. & Arakeri, J. H. 2009 Flow over a cylinder with a hinged-splitter plate. J. Fluids Struct. 25 (4), 713–720.Google Scholar
Shukla, S., Govardhan, R. N. & Arakeri, J. H. 2013 Dynamics of a flexible splitter plate in the wake of a circular cylinder. J. Fluids Struct. 41, 127–134.Google Scholar
Singh, S. P. & Mittal, S. 2005 Vortex-induced oscillations at low Reynolds numbers: hysteresis and vortex-shedding modes. J. Fluids Struct. 20 (8), 1085–1104.Google Scholar
Song, R., Shan, X., Lv, F. & Xie, T. 2015 A study of vortex-induced energy harvesting from water using PZT piezoelectric cantilever with cylindrical extension. Ceramics Intl 41, S768–S773.Google Scholar
Soti, A. K., Thompson, M. C., Sheridan, J. & Bharadwaj, R. 2017 Harnessing electrical power from vortex-induced vibration of a circular cylinder. J. Fluids Struct. 70, 360–373.Google Scholar
Stappenbelt, B. 2010 Splitter-plate wake stabilisation and low aspect ratio cylinder flow-induced vibration mitigation. Intl J. Offshore Polar Engng 20 (3), 1–6.Google Scholar
Tezduyar, T. E. 2003 Computation of moving boundaries and interfaces and stabilization parameters. Intl J. Numer. Meth. Fluids 43 (5), 555–575.Google Scholar
Tezduyar, T. E., Aliabadi, S., Behr, M., Johnson, A. & Mittal, S. 1993 Parallel finite-element computation of 3D flows. Computer 26 (10), 27–36.Google Scholar
Tezduyar, T. E., Behr, M. & Liou, J. 1992a A new strategy for finite element computations involving moving boundaries and interfaces the deforming-spatial-domain/space-time procedure. I. The concept and the preliminary numerical tests. Comput. Meth. Appl. Mech. Engng 94 (3), 339–351.Google Scholar
Tezduyar, T. E., Behr, M., Mittal, S. & Johnson, A. A. 1992 Computation of unsteady incompressible flows with the stabilized finite element methods: Space-time formulations, iterative strategies and massively parallel implementations. In New Methods in Transient Analysis, vol. 246, pp. 7–24. AMD, ASME.Google Scholar
Tezduyar, T. E., Behr, M., Mittal, S. & Liou, J. 1992c A new strategy for finite element computations involving moving boundaries and interfaces the deforming-spatial-domain/space-time procedure. II. Computation of free-surface flows, two-liquid flows, and flows with drifting cylinders. Comput. Meth. Appl. Mech. Engng 94 (3), 353–371.Google Scholar
Tezduyar, T. E., Mittal, S., Ray, S. E. & Shih, R. 1992d Incompressible flow computations with stabilized bilinear and linear equal-order-interpolation velocity-pressure elements. Comput. Meth. Appl. Mech. Engng 95 (2), 221–242.Google Scholar
Tokumaru, P. T. & Dimotakis, P. E. 1991 Rotary oscillation control of a cylinder wake. J. Fluid Mech. 224, 77–90.Google Scholar
Triantafyllou, M. S., Hover, F. S., Techet, A. H. & Yue, D. K. P. 2003 Vortex-induced vibrations of slender structures in shear flow. In IUTAM Symposium on Integrated Modeling of Fully Coupled Fluid Structure Interactions Using Analysis, Computations and Experiments (ed. Benaroya, H. & Wei, T. J.), pp. 313–327. Springer.Google Scholar
Turek, S. & Hron, J. 2006 Proposal for Numerical Benchmarking of Fluid–Structure Interaction between an Elastic Object and Laminar Incompressible Flow, pp. 371–385. Springer.Google Scholar
Unal, M. F. & Rockwell, D. 1988 On vortex formation from a cylinder. Part 2. Control by splitter-plate interference. J. Fluid Mech. 190, 513–529.Google Scholar
Wan, H. & Patnaik, S. S. 2016 Suppression of vortex-induced vibration of a circular cylinder using thermal effects. Phys. Fluids 28 (12), 123603.Google Scholar
Williamson, C. H. K. 1996a Three-dimensional wake transition. J. Fluid Mech. 328, 345–407.Google Scholar
Williamson, C. H. K. 1996b Vortex dynamics in the cylinder wake. Annu. Rev. Fluid Mech. 28 (1), 477–539.Google Scholar
Williamson, C. H. K. & Govardhan, R. 2004 Vortex-induced vibrations. Annu. Rev. Fluid Mech. 36, 413–455.Google Scholar
Wu, J., Qiu, Y. L., Shu, C. & Zhao, N. 2014a Flow control of a circular cylinder by using an attached flexible filament. Phys. Fluids 26 (10), 103601.Google Scholar
Wu, J., Shu, C. & Zhao, N. 2014b Numerical investigation of vortex-induced vibration of a circular cylinder with a hinged flat plate. Phys. Fluids 26 (6), 063601.Google Scholar
Wu, X., Ge, F. & Hong, Y. 2012 A review of recent studies on vortex-induced vibrations of long slender cylinders. J. Fluids Struct. 28, 292–308.Google Scholar
You, D., Choi, H., Choi, M.-R. & Kang, S.-H. 1998 Control of flow-induced noise behind a circular cylinder using splitter plates. AIAA J. 36 (11), 1961–1967.Google Scholar