Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-09T06:08:20.987Z Has data issue: false hasContentIssue false

The critical mass phenomenon in vortex-induced vibration at low $Re$

Published online by Cambridge University Press:  05 May 2017

Navrose
Affiliation:
Department of Aerospace Engineering, Indian Institute of Technology Kanpur, Kanpur, UP 208016, India
Sanjay Mittal*
Affiliation:
Department of Aerospace Engineering, Indian Institute of Technology Kanpur, Kanpur, UP 208016, India
*
Email address for correspondence: [email protected]

Abstract

Vortex-induced vibration of a circular cylinder with low mass ratio ($0.05\leqslant m^{\ast }\leqslant 10.0$) is investigated, via a stabilized space–time finite element formulation, in the laminar flow regime where $m^{\ast }$ is defined as the ratio of the mass of the oscillating structure to the mass of the fluid displaced by it. Computations are carried out over a wide range of reduced speed, $U^{\ast }$, which is defined as $U/f_{N}D$, where $U$ is the free-stream speed, $f_{N}$ the natural frequency of the spring mass system in vacuum and $D$ the diameter of the cylinder. In particular, the situation where the lock-in regime extends up to infinite reduced speed is explored. Studies at large $Re$, in the past, have shown that the normalized amplitude of cylinder oscillation at infinite reduced speed, $A_{\infty }^{\ast }$, exhibits a sharp increase when $m^{\ast }$ is reduced below the critical mass ratio ($m_{crit}^{\ast }$). This jump signifies a shift from desynchronized response to lock-in state. In this work it is shown that in the laminar regime, a jump in $A_{\infty }^{\ast }$ occurs only beyond a certain $Re$ ($=Re_{j}\sim 108$). For $Re<Re_{j}$, the response increases smoothly with decrease in $m^{\ast }$ with no discernible jump. In this situation, therefore, the identification of $m_{crit}^{\ast }$ based on jump in response at $U^{\ast }=\infty$ is not possible. The difference in the $A^{\ast }-m^{\ast }$ variation on the two sides of $Re=Re_{j}$, is attributed to the difference in the transition between the lower branch of cylinder response and desynchronization regime. This transition is brought out more clearly by plotting $A^{\ast }$ with $f_{v_{o}}/f$, where $f_{v_{o}}$ is the vortex shedding frequency for the flow past a stationary cylinder and $f$ is the cylinder vibration frequency. In the $A^{\ast }-f_{v_{o}}/f$ plane, the response data as well as other quantities related to free vibrations, for different $m^{\ast }$, collapse on a curve. Unlike at high $Re$, the collapsed curves show a dependence on $Re$ in the laminar regime. The transition between the lock-in and desynchronized state, as seen from the collapsed curves, is qualitatively different for $Re$ on either side of $Re_{j}$. The collapsed curves, at a certain $Re$, are utilized to estimate $A^{\ast }$ for the limiting case of $(U^{\ast },m^{\ast })=(\infty ,0)$. Interestingly, unlike at large $Re$, this limit value is found to be lower than the peak amplitude of cylinder vibration at a given $Re$. Hysteresis in the cylinder response, near the higher-$U^{\ast }$ end of the lock-in regime, is explored. It is observed that the range of $U^{\ast }$ with hysteretic response increases with decrease in $m^{\ast }$. Interestingly, for a certain range of $m^{\ast }$, the response is hysteretic from a finite $U^{\ast }$ up to $U^{\ast }=\infty$. We refer to this phenomenon as hysteresis forever. It occurs because of the existence of multiple response states of the system at $U^{\ast }=\infty$, for a certain range of $m^{\ast }$. The study brings out the significant differences in the response of the fluid–structure system associated with the critical mass phenomenon between the low- and high-$Re$ regime.

Type
Papers
Copyright
© 2017 Cambridge University Press 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bearman, P. W. 1984 Vortex shedding from oscillating bluff bodies. Annu. Rev. Fluid Mech. 16 (1), 195222.10.1146/annurev.fl.16.010184.001211Google Scholar
Bearman, P. W. 2011 Circular cylinder wakes and vortex-induced vibrations. J. Fluids Struct. 27 (5), 648658.10.1016/j.jfluidstructs.2011.03.021Google Scholar
Feng, C. C.1968 The measurement of vortex induced effects in flow past stationary and oscillating circular and d-section cylinders. Masters thesis, University of British Columbia, Vancouver.Google Scholar
Govardhan, R. & Williamson, C. H. K 2000 Modes of vortex formation and frequency response of a freely vibrating cylinder. J. Fluid Mech. 420, 85130.10.1017/S0022112000001233Google Scholar
Govardhan, R. & Williamson, C. H. K 2002 Resonance forever: existence of a critical mass and an infinite regime of resonance in vortex-induced vibration. J. Fluid Mech. 473, 147166.10.1017/S0022112002002318Google Scholar
Govardhan, R. & Williamson, C. H. K 2006 Defining the modified Griffin plotin vortex-induced vibration: revealing the effect of Reynolds number using controlled damping. J. Fluid Mech. 561, 147180.10.1017/S0022112006000310Google Scholar
Horowitz, M. & Williamson, C. H. K. 2010 Vortex-induced vibration of a rising and falling cylinder. J. Fluid Mech. 662, 352383.10.1017/S0022112010003265Google Scholar
Hover, F. S., Techet, A. H. & Triantafyllou, M. S. 1998 Forces on oscillating uniform and tapered cylinders in crossflow. J. Fluid Mech. 363, 97114.10.1017/S0022112098001074Google Scholar
Khalak, A. & Williamson, C. H. K. 1999 Motions, forces and mode transitions in vortex-induced vibrations at low mass-damping. J. Fluids Struct. 13 (7), 813851.10.1006/jfls.1999.0236Google Scholar
Leontini, J. L., Stewart, B. E., Thompson, M. C. & Hourigan, K. 2005 Predicting vortex-induced vibration from driven oscillation results. Appl. Math. Model. 30 (10), 10961102.10.1016/j.apm.2005.05.017Google Scholar
Mackowski, A. W. & Williamson, C. H. K. 2013 An experimental investigation of vortex-induced vibration with nonlinear restoring forces. Phys. Fluids 25 (8), 087101.10.1063/1.4819082Google Scholar
Mittal, S.1992 Stabilized space–time finite element formulations for unsteady incompressible flows involving fluid-body interactions. PhD thesis, University of Minnesota, Minneapolis.Google Scholar
Mittal, S. & Kumar, V. 1999 Finite element study of vortex-induced cross-flow and in-line oscillations of a circular cylinder at low Reynolds numbers. Intl J. Numer. Meth. Fluids 31 (7), 10871120.10.1002/(SICI)1097-0363(19991215)31:7<1087::AID-FLD911>3.0.CO;2-C3.0.CO;2-C>Google Scholar
Mittal, S. & Tezduyar, T. E 1992 A finite element study of incompressible flows past oscillating cylinders and aerofoils. Intl J. Numer. Meth. Fluids 15 (9), 10731118.10.1002/fld.1650150911Google Scholar
Morse, T. L. & Williamson, C. H. K. 2009a The effect of Reynolds number on the critical mass phenomenon in vortex-induced vibration. Phys. Fluids 21 (4), 045105.10.1063/1.3113522Google Scholar
Morse, T. L. & Williamson, C. H. K. 2009b Prediction of vortex-induced vibration response by employing controlled motion. J. Fluid Mech. 634, 539.10.1017/S0022112009990516Google Scholar
Navrose & Mittal, S. 2013 Free vibrations of a cylinder: 3-D computations at Re = 1000. J. Fluids Struct. 41, 109118.10.1016/j.jfluidstructs.2013.02.017Google Scholar
Navrose & Mittal, S. 2016 Lock-in in vortex-induced vibration. J. Fluid Mech. 794, 565594.10.1017/jfm.2016.157Google Scholar
Navrose & Mittal, S. 2017 A new regime of multiple states in free vibration of a cylinder at low Re . J. Fluids Struct. 68, 310321.10.1016/j.jfluidstructs.2016.11.003Google Scholar
Navrose, Yogeswaran, V., Sen, S. & Mittal, S. 2014 Free vibrations of an elliptic cylinder at low Reynolds numbers. J. Fluids Struct. 51, 5567.10.1016/j.jfluidstructs.2014.07.012Google Scholar
Prasanth, T. K. & Mittal, S. 2008 Vortex-induced vibrations of a circular cylinder at low Reynolds numbers. J. Fluid Mech. 594, 463491.10.1017/S0022112007009202Google Scholar
Prasanth, T. K., Premchandran, V. & Mittal, S. 2011 Hysteresis in vortex-induced vibrations: critical blockage and effect of m . Trans. J. Fluid Mech. 671, 207225.10.1017/S0022112010005537Google Scholar
Raghavan, K., Ben-Simon, Y., Garcia, E. M. H. & Bernistas, M. M. 2008 Vivace (vortex induced vibration aquatic clean energy): a new concept in generation of clean and renewable energy from fluid flow. J. Offshore Mech. Arctic Engng 130, 041101.Google Scholar
Raghavan, K., Garcia, E. M. H., Bernistas, M. M. & Ben-Simon, Y. 2009 The vivace converter: Model tests at reynolds numbers around 100 000. J. Offshore Mech. Arctic Engng 131, 113.Google Scholar
Ryan, K., Thompson, M. C. & Hourigan, K. 2005 Variation in the critical mass ratio of a freely oscillating cylinder as a function of Reynolds number. Phys. Fluids 17 (3), 038106.10.1063/1.1850871Google Scholar
Sarpkaya, T. 2004 A critical review of the intrinsic nature of vortex-induced vibrations. J. Fluids Struct. 19 (4), 389447.10.1016/j.jfluidstructs.2004.02.005Google Scholar
Shiels, D., Leonard, A. & Roshko, A. 2001 Flow-induced vibration of a circular cylinder at limiting structural parameters. J. Fluids Struct. 15 (1), 321.10.1006/jfls.2000.0330Google Scholar
Singh, S. P. & Mittal, S. 2005 Vortex-induced oscillations at low Reynolds numbers: hysteresis and vortex-shedding modes. J. Fluids Struct. 20 (8), 10851104.10.1016/j.jfluidstructs.2005.05.011Google Scholar
Staubli, T. 1983 Calculation of the vibration of an elastically mounted cylinder using experimental data from forced vibration. Trans. ASME J. Fluids Engng 105 (2), 225229.10.1115/1.3240968Google Scholar
Tezduyar, T. E., Behr, M., Mittal, S. & Liou, J. 1992a A new strategy for finite element computations involving moving boundaries and interfaces-the deforming-spatial-domain/space–time procedure: II. Computation of free-surface flows, two-liquid flows, and flows with drifting cylinders. Comput. Meth. Appl. Mech. Engng 94 (3), 353371.10.1016/0045-7825(92)90060-WGoogle Scholar
Tezduyar, T. E., Liou, J. & Behr, M. 1992b A new strategy for finite element computations involving moving boundaries and interfaces–the dsd/st procedure: I. The concept and the preliminary numerical tests. Comput. Meth. Appl. Mech. Engng 94 (3), 339351.10.1016/0045-7825(92)90059-SGoogle Scholar
Tezduyar, T. E., Mittal, S., Ray, S. E. & Shih, R. 1992c Incompressible flow computations with stabilized bilinear and linear equal-order-interpolation velocity-pressure elements. Comput. Meth. Appl. Mech. Engng 95 (2), 221242.10.1016/0045-7825(92)90141-6Google Scholar
Williamson, C. H. K. & Govardhan, R. 2004 Vortex-induced vibrations. Annu. Rev. Fluid Mech. 36, 413455.10.1146/annurev.fluid.36.050802.122128Google Scholar
Wu, X., Ge, F. & Hong, Y. 2012 A review of recent studies on vortex-induced vibrations of long slender cylinders. J. Fluids Struct. 28, 292308.10.1016/j.jfluidstructs.2011.11.010Google Scholar