Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-26T15:23:40.969Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanics of machine milking: I. Pressures in the teatcup assembly and liner wall movement

Published online by Cambridge University Press:  01 June 2009

C. C. Thiel ,
P. A. Clough  and
D. N. Akam
C. C. Thiel
Affiliation:
National Institute for Research in Dairying, Shinfield, Reading
P. A. Clough
Affiliation:
National Institute for Research in Dairying, Shinfield, Reading
D. N. Akam
Affiliation:
National Institute for Research in Dairying, Shinfield, Reading
Get access Rights & Permissions [Opens in a new window]

Summary

A method is described of measuring pressures in a teatcup assembly using strain gauge transducers and simultaneously following movement of the liner wall by means of a cine camera. In preliminary experiments with a narrow bore type liner it was found that pressures below the teat could vary during a single pulsation cycle from a few inches of mercury below atmospheric pressure (inHg vacuum) to as high as 25 inHg vacuum in the absence of an airbleed. Bleeding air into the barrel of the liner or into the clawpiece considerably reduced fluctuation in pressure, and the vacuum barely rose above the nominal milking vacuum of 15 inHg. Reducing the rate of change of pressure in the pulsation chamber did not greatly affect the maximum vacuum obtained. Opening and closing of the liner by pressure change in the pulsation chamber was under some conditions considerably delayed by the pressure conditions existing inside the liner.

It is suggested that inertia effects of milk in the cluster and the natural frequency of the system are largely responsible for the observed pressure changes under the teat.

Type
Original Articles
Information
Journal of Dairy Research , Volume 31 , Issue 3 , October 1964 , pp. 303 - 313
Copyright
Copyright © Proprietors of Journal of Dairy Research 1964

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Ardran, G. M., Kemp, F. H., Clough, P. A. & Dodd, F. H. (1958). J. Dairy Res. 25, 154.CrossRefGoogle Scholar
Hupfauer, M. (1956). Landtech. Forsch., Munch., 6, 26.Google Scholar
Neild, J., Clark, D., Hoffman, B. & Olney, G. (1962). Aust. J. Dairy Tech. 17, 45.Google Scholar
Noorlander, D. O. & Schalm, O. W. (1958). J. Amer. vet. med. Ass. 133, 474.Google Scholar
Noorlander, D. O. (1960). Milking Machines and Mastitis. Compton, California: Compton Press.Google Scholar
Phillips, D. S. M. (1963).N.Z. J. Agric. 107, 397.Google Scholar
Thiel, C. C. & Akam, D. N. (1964). J. Dairy Res. 31, 167.CrossRefGoogle Scholar
Whittlestone, W. G. & Olney, G. R. (1962). Aust. J. Dairy Tech. 17, 205.Google Scholar