Hostname: page-component-cd9895bd7-dzt6s Total loading time: 0 Render date: 2024-12-23T18:47:47.114Z Has data issue: false hasContentIssue false
  • English
  • Français

A wideband right-angle transition between thin substrate integrated waveguide and rectangular waveguide based on multi-section structure

Published online by Cambridge University Press:  27 February 2015

Teng Li  and
Wenbin Dou
Teng Li*
Affiliation:
State Key Laboratory of Millimeter Waves, Southeast University, Nanjing 210096, China. Phone: +86 025 83794022
Wenbin Dou
Affiliation:
State Key Laboratory of Millimeter Waves, Southeast University, Nanjing 210096, China. Phone: +86 025 83794022
*
Corresponding author:T. Li Email: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

In this paper, a novel wideband right-angle transition between thin substrate integrated waveguide (SIW) and rectangular waveguide (RWG) based on multi-section structure operating at center frequency 31.5 GHz is presented. A multi-section SIW with a rectangular aperture etched on the broad wall and two stepped ridges embedded in the RWG flange are introduced to obtain a wide impedance matching. The simulations show that the bandwidth with return loss better than 20 dB is about 17 GHz. In order to verify our designs, two back-to-back transitions with different lengths are fabricated and measured. The experimental results agree well with simulations. The proposed component shows an insertion loss less than 0.44 dB and a return loss better than 14.5 dB over 12.15 GH, which corresponds to 38.57% bandwidth.

Keywords

Passive components and circuitsModelingsimulation and characterizations of devices and circuits
Type
Research Paper
Information
International Journal of Microwave and Wireless Technologies , Volume 8 , Issue 2 , March 2016 , pp. 185 - 191
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Głogowski, R.; Zürcher, J.-F.; Peixeiro, C. and Mosig, J.R.: Broadband Ka-band rectangular waveguide to substrate integrated waveguide transition. Electron Lett., 49 (2013), 602–604.Google Scholar
[2]Xia, L.; Xu, R.; Yan, B.; Li, J.; Guo, Y. and Wang, J.: Broadband transition between air-filled waveguide and substrate integrated waveguide. Electron Lett., 42 (2006), 1403–1404.Google Scholar
[3]Li, J.; Wen, G. and Xiao, F.: Broadband transition between rectangular waveguide and substrate integrated waveguide. Electron Lett., 46 (2010), 223–224.Google Scholar
[4]Dousset, D.; Wu, K. and Claude, S.: Millimetre-wave broadband transition of substrate-integrated waveguide to rectangular waveguide. Electro Lett., 46 (2010), 1610–1611.Google Scholar
[5]Jin, H.; Chen, W. and Wen, G.: Broadband transition between waveguide and substrate integrated waveguide based on quasi-Yagi antenna. Electro Lett., 48 (2012), 355–356.Google Scholar
[6]Peters, F.D.L.; Denidni, T.A. and Tatu, S.O.: Two layer LTCC substrate integrated to rectangular waveguide transition and its application for millimeter-wave LTCC characterization. Microw. Opt Technol Lett., 00 (2012), 2675–2679.Google Scholar
[7]Li, T.; Meng, H.F. and Dou, W.B.: Broadband transition between substrate integrated waveguide and rectangular waveguide based on ridged steps. IEICE Electron. Express., 11 (2014), pp. 1–7.Google Scholar
[8]Kai, T.; Hirokawa, J. and Ando, M.: Transformer between a thin post-wall waveguide to a standard metal waveguide. IEEE Antennas Propag. Soc. Int., 4 (2002), 436–439.Google Scholar
[9]Kai, T.; Hirokawa, J. and Ando, M.: A stepped post-wall waveguide with aperture interface to standard waveguide. IEEE Antennas Propag. Soc. Int. Symp., 2 (2004), 1527–1530.Google Scholar
[10]Huang, Y. and Wu, K.-L.: A broad-band LTCC integrated transition of laminated waveguide to air-filled waveguide for millimeter-wave applications. IEEE Trans Microw. Theory Tech., 51 (2003), 1613–1617.Google Scholar
[11]Huang, Y. and Wu, K.-L.: A Ka-band broadband integrated transition of air-filled waveguide to laminated waveguide. IEEE Microw. Wirel. Compon. Lett., 22 (2012), 515–517.Google Scholar
[12]Li, L.; Chen, X.; Khazaka, R. and Wu, K.: A transition from substrate integrated waveguide (SIW) to standard waveguide. Asia Pacific, Microwave Conf. 2009, 2009, pp. 2605–2608.Google Scholar
[13]Kordiboroujeni, Z. and Bornemann, J.: Designing the width of substrate integrated waveguide structures. IEEE Microw. Wirel. Compon. Lett., 23 (2013), 518–520.Google Scholar
[14]Deslandes, D. and Wu, K.: Accurate modeling, wave mechanisms, and design considerations of a substrate integrated waveguide. IEEE Trans. Microw. Theory Tech., 54 (2006), 2516–2526.Google Scholar