Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-05T14:47:57.611Z Has data issue: false hasContentIssue false

Evaluation of some features for extended target extraction in polarimetric and non-polarimetric radar

Published online by Cambridge University Press:  15 May 2009

Piet van Genderen*
Affiliation:
International Research Centre for Telecommunications and Radar, Delft University of Technology, Mekelweg 4, 2628 CD Delft, The Netherlands. Phone: +31 15 278 5055.
Vsevolod Kovalenko
Affiliation:
International Research Centre for Telecommunications and Radar, Delft University of Technology, Mekelweg 4, 2628 CD Delft, The Netherlands. Phone: +31 15 278 5055.
*
Corresponding author: Piet van Genderen Email: [email protected]

Abstract

Detection in most surveillance radars is based on the condition of point targets against a more or less homogeneous background. Currently, the resolution of many new types of radar is increasing, at least in the range dimension. Therefore many objects can no longer be considered as points. Also as a consequence, the background is becoming more diverse, in statistical terms. The scene addressed in this paper concerns a ground clutter environment, and extended objects observed with a polarimetric radar with modestly high resolution (i.e. 6 m in range). A step-by-step approach is proposed for the detection and parameter assessment of extended objects and adding classification based on polarimetric features. The evaluation of this approach is based on recordings of real natural scenes and artificially inserted extended objects. It has been observed that in multi-stage detection object classification benefits from several features, including polarimetric ones. It is proposed that the quality of the contour circumscribing the object is the prime factor for quality of features next to polarimetric features. Clutter is affecting, however, the edges of the contours, and therefore may have a major impact on features that are dependent on the shape of these contours. The results also suggest that in the case of large targets with a basically simple shape, like ships, the eccentricity of the shape of the extended object is consistent from scan to scan and probably could support the target tracking.

Type
Original Article
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Gregers Hansen, V.: A survey of radar CFAR and some new results, in Proc. IRS2005Berlin, September 6–8, 2005.Google Scholar
[2]Rohling, H.: Radar CFAR thresholding in clutter and multiple target situations. IEEE Trans. Aerosp. Electron. Syst., 19 (1983), 4447.Google Scholar
[3]Löhr, A.; Schrodi, W.: New approaches to tracking, track initialisation and tracking in clutter areas, in Proc. German Radar Symp. GRS2002, 2002, 7781.Google Scholar
[4]van Genderen, P.: On the use of radial speed for the reduction of false track rate, in Proc. Int. Radar Symp. IRS2005, 2005.Google Scholar
[5]van Genderen, P.; Kovalenko, V.: Evaluation of some features for extended target extraction in polarimetric radar, in Proc. TIDWC ESAV08 Workshop, 2008, 144149.CrossRefGoogle Scholar
[6]Kelly, E.J.: An adaptive detection algorithm, IEEE Trans. Aerosp. Electron. Syst., 22 (1986), 115123.CrossRefGoogle Scholar
[7]Robey, F.; Fuhrmann, D.; Kelly, E.; Nitzberg, R.: A CFAR adaptive matched filter detector, IEEE Trans. Aerosp. Electron. Syst., 28 (1992), 208216.CrossRefGoogle Scholar
[8]Skolnik, M.I.: Introduction to Radar Systems, 3d ed., McGraw-Hill Book Company, Singapore, 2001.Google Scholar