Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-22T08:21:51.448Z Has data issue: false hasContentIssue false
  • English
  • Français

Embedded smart sensor dipole antennas for real-time damage assessment, humidity, and temperature monitoring in reinforced and non-reinforced concrete structures

Published online by Cambridge University Press:  05 October 2021

Murat Ozturk Open the ORCID record for Murat Ozturk [Opens in a new window]
Murat Ozturk*
Affiliation:
Department of Civil Engineering, Iskenderun Technical University, 31200Iskenderun, Hatay, Turkey
*
Author for correspondence: Murat Ozturk, E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

In this study, a dipole antenna is designed for real-time damage assessment, humidity, and temperature monitoring in reinforced and non-reinforced concrete structures. The antenna-based sensor is embedded into reinforced and non-reinforced concrete beams to assess electromagnetic measurements. Reflection parameter S11 in dB values and resonant frequencies of the embedded antenna are evaluated to detect damage, humidity, and temperature changes. The exploratory results show that as deformation increases in reinforced concrete, resonance frequency values decrease and S11 values increase. The load and resonance frequency values showed very close trends as deformation increases in the beam. In water content sensing experiments, the S11 in dB values of the antenna decrease as the humidity increases for concrete specimens while the resonance frequency values increase as the humidity increases for the reinforced concrete specimen. Elevated temperature sensing experimental results show that the resonance frequency values of the antenna decrease as the temperature of the specimen increases for concrete specimens while the S11 in dB values increase as the temperature of the specimen increases for reinforced concrete specimen.

Keywords

Antennaconcretereal-time damage assessmenthumidity monitoringtemperature monitoring
Type
Antenna Design, Modeling and Measurements
Information
International Journal of Microwave and Wireless Technologies , Volume 14 , Issue 4 , May 2022 , pp. 482 - 491
Check for updates
Copyright
Copyright © The Author(s), 2021. Published by Cambridge University Press in association with the European Microwave Association

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Han, B, Zhang, L and Ou, J (2017) Future developments and challenges of smart and multifunctional concrete. In Smart and Multifunctional Concrete Toward Sustainable Infrastructures. Singapore: Springer, pp. 391–400. doi:10.1007/978-981-10-4349-9_24CrossRefGoogle Scholar
Sony, S, Laventure, S and Sadhu, A (2019) A literature review of next-generation smart sensing technology in structural health monitoring. Structural Control and Health Monitoring 26, 2321.CrossRefGoogle Scholar
Ai, D, Zhu, H and Luo, H (2016) Sensitivity of embedded active PZT sensor for concrete structural impact damage detection. Construction and Building Materials 111, 348–357.CrossRefGoogle Scholar
Shanglin Song, JW, Hou, Y, Guo, M, Wang, L and Tong, X (2017) An investigation on the aggregate-shape embedded piezoelectric sensor for civil infrastructure health monitoring. Construction and Building Materials 131, 57–65.CrossRefGoogle Scholar
Ge, Y, Elshafie, MZEB, Dirar, S and Middleton, CR (2014) The response of embedded strain sensors in concrete beams subjected to thermal loading. Construction and Building Materials 70, 279–290.CrossRefGoogle Scholar
Ahmadi, J, Feirahi, MH, Farahmand-Tabar, S and Keshvari Fard, AH (2020) A novel approach for non-destructive EMI-based corrosion monitoring of concrete-embedded reinforcements using multi-orientation piezoelectric sensors. Construction and Building Materials 273, 121689.CrossRefGoogle Scholar
Lau, KT (2014) Structural health monitoring for smart composites using embedded FBG sensor technology. Materials Science and Technology 30, 1642–1654.CrossRefGoogle Scholar
Song, S, Hou, Y, Guo, M, Wang, L, Tong, X and Wu, J (2017) An investigation on the aggregate-shape embedded piezoelectric sensor for civil infrastructure health monitoring. Construction and Building Materials 131, 57–65.CrossRefGoogle Scholar
Narayanan, A, Kocherla, A and Subramaniam, KVL (2017) Embedded PZT sensor for monitoring mechanical impedance of hydrating cementitious materials. Journal of Nondestructive Evaluation 36, 64.CrossRefGoogle Scholar
Teng, KH, Kot, P, Muradov, M, Shaw, A, Hashim, K, Gkantou, M, Al-Shamma, A and Uk, AA (2019) Embedded smart antenna for non-destructive testing and evaluation (NDT&E) of moisture content and deterioration in concrete. Sensors 19, 547.CrossRefGoogle Scholar
Chakraborty, J, Katunin, A, Klikowicz, P and Salamak, M (2019) Early crack detection of reinforced concrete structure using embedded sensors. Sensors 19, 3879.CrossRefGoogle ScholarPubMed
Arhant, M, Meek, N, Penumadu, D, Davies, P and Garg, N (2018) Residual strains using integrated continuous fiber optic sensing in thermoplastic composites and structural health monitoring. Experimental Mechanics 58, 167–176.CrossRefGoogle Scholar
Han, Q, Ma, Q, Xu, J and Liu, M (2020) Structural health monitoring research under varying temperature condition: a review. Journal of Civil Structural Health Monitoring 11, 149–173.CrossRefGoogle Scholar
Hojaiji, H, Kalantarian, H, Bui, AAT, King, CE and Sarrafzadeh, M (2017) Temperature and humidity calibration of a low-cost wireless dust sensor for real-time monitoring. In SAS 2017–2017 IEEE Sensors Appl. Symp. Proc., Institute of Electrical and Electronics Engineers Inc. doi:10.1109/SAS.2017.7894056CrossRefGoogle Scholar
Hanif, MU, Ibrahim, Z, Ghaedi, K, Hashim, H and Javanmardi, A (2018) Damage assessment of reinforced concrete structures using a model-based nonlinear approach – a comprehensive review. Construction and Building Materials 192, 846–865.CrossRefGoogle Scholar
Das, S and Saha, P (2018) A review of some advanced sensors used for health diagnosis of civil engineering structures. Measurement: Journal of the International Measurement Confederation 129, 68–90.CrossRefGoogle Scholar
Bhattacharyya, R, Floerkemeier, C, Sarma, S and Deavours, D (2011) RFID tag antenna based temperature sensing in the frequency domain. IEEE Int. Conf. RFID, RFID 2011, pp. 70–77. doi:10.1109/RFID.2011.5764639CrossRefGoogle Scholar
Liu, Y, Deng, F, He, Y, Li, B, Liang, Z and Zhou, S (2017) Novel concrete temperature monitoring method based on an embedded passive RFID sensor tag. Sensors 17, 1463.CrossRefGoogle Scholar
Zhou, S, Deng, F, Yu, L, Li, B, Wu, X and Yin, B (2016) A novel passive wireless sensor for concrete humidity monitoring. Sensors 16, 1535.CrossRefGoogle ScholarPubMed
Balanis, CA (2005) Antenna Theory, Analysis and Design. 3rd Edn. New York, NY, USA: Wiley, pp. 815–826.Google Scholar
Makul, N, Rattanadecho, P and Agrawal, DK (2014) Applications of microwave energy in cement and concrete – a review. Renewable and Sustainable Energy Reviews 37, 715–733.CrossRefGoogle Scholar
Xu, D, Banerjee, S, Wang, Y, Huang, S and Cheng, X (2015) Temperature and loading effects of embedded smart piezoelectric sensor for health monitoring of concrete structures. Construction and Building Materials 76, 187–193.CrossRefGoogle Scholar
Bhattacharyya, R, Floerkemeier, C, Sarma, S and Deavours, D (2011) RFID tag antenna based temperature sensing in the frequency domain. In 2011 IEEE International Conference on RFID (2011), 70–77, IEEE.CrossRefGoogle Scholar
Zhou, S, Deng, F, Yu, L, Li, B, Wu, X and Yin, B (2016) A novel passive wireless sensor for concrete humidity monitoring. Sensors 16–9, 1535.CrossRefGoogle Scholar
Guerra, JRF, de Siqueira Campos, ALP and de Andrade, HD (2021) A microwave system for measuring moisture of hollow concrete blocks. Sensors and Actuators A: Physical 323, 112657.CrossRefGoogle Scholar
Adão, FJSF, Helmerich, R, Voigt, G, Moldenhauer, L and Neumann, P (2017) Humidity monitoring in concrete using Bluetooth Low Energy sensors. In Fourth Conference on smart monitoring assessments and rehabilitation of civil structures.Google Scholar
Guo, J, Feng, W, Friedt, JM, Zhao, Q and Sato, M (2019) A half-cut compact monopole antenna for SFCW radar-based concrete wall monitoring with a passive cooperative target. IEEE Geoscience and Remote Sensing Letters 17–6, 973–977.Google Scholar
Kim, J, Luis, R, Smith, MS, Figueroa, JA, Malocha, DC and Nam, BH (2015) Concrete temperature monitoring using passive wireless surface acoustic wave sensor system. Sensors and Actuators A: Physical 224, 131–139.CrossRefGoogle Scholar
Gkantou, M, Muradov, M, Kamaris, GS, Hashim, K, Atherton, W and Kot, P (2019) Novel electromagnetic sensors embedded in reinforced concrete beams for crack detection. Sensors 19–23, 5175.CrossRefGoogle Scholar
Ozbey, B, Demir, HV, Kurc, O, Erturk, VB and Altintas, A (2014) Wireless measurement of elastic and plastic deformation by a metamaterial-based sensor. Sensors 14–10, 19609–19621.CrossRefGoogle Scholar
Daliri, A, Galehdar, A, John, S, Wang, CH, Rowe, WS and Ghorbani, K (2012) Wireless strain measurement using circular microstrip patch antennas. Sensors and Actuators A: Physical 184, 86–92.CrossRefGoogle Scholar
Pieper, D, Donnell, KM, Abdelkarim, O and ElGawady, MA (2016) Embedded FSS sensing for structural health monitoring of bridge columns. In IEEE International Instrumentation and Measurement Technology Conference Proceedings (pp. 1–5). IEEE.CrossRefGoogle Scholar