Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-19T05:28:43.520Z Has data issue: false hasContentIssue false
  • English
  • Français

Position estimation of lap joints for seam tracking applications at mm-wave frequencies

Published online by Cambridge University Press:  23 April 2013

Jochen O. Schrattenecker ,
Andreas Haderer ,
Günther Reinthaler  and
Andreas Stelzer
Jochen O. Schrattenecker*
Affiliation:
Institute for Communications Engineering and RF-Systems, Altenberger Str. 69, A-4040 Linz, Austria. Phone : +43 732 2468 6390
Andreas Haderer
Affiliation:
Institute for Communications Engineering and RF-Systems, Altenberger Str. 69, A-4040 Linz, Austria. Phone : +43 732 2468 6390
Günther Reinthaler
Affiliation:
Fronius International GmbH, Günter Fronius Str. 1, A-4600 Wels-Thalheim, Austria
Andreas Stelzer
Affiliation:
Institute for Communications Engineering and RF-Systems, Altenberger Str. 69, A-4040 Linz, Austria. Phone : +43 732 2468 6390
*
Corresponding author: J. Schrattenecker Email: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

In this paper, we present the results of using a frequency-stepped continuous-wave radar system to estimate the position of overlapping and electrically good conductive plates. We especially focus on polarimetric scattering effects caused by the step of a lap joint, which is a common welding-geometry. To model the step's contribution to the overall scattered signal, we use a two-dimensional combined field integral equation (CFIE) approach. For demonstrating its practical applicability, the implemented scattering model is verified by measurements. To emphasize the improvements of position estimation by using a CFIE approach, the outcomes of the model are compared to a commonly used point scattering model. Finally, the numerical signal is utilized to precisely estimate the position of the lap joint.

Keywords

Microwave mesurementsRadar applications
Type
Research Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 5 , Special Issue 3: European Microwave Week 2012 , June 2013 , pp. 409 - 417
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Michaeli, A.: Equivalent edge currents for arbitrary aspects of observation. IEEE Trans. Antennas Propag., 32 (1984), 252–258.Google Scholar
[2]Balanis, C.A. : Advanced Engineering Electromagnetics, John Wiley & Sons, Inc., New York, 1989.Google Scholar
[3]Ufimtsev, P.Y.: Approximate computation of the diffraction of plane electromagnetic waves at certain metal bodies. Sov. Phys.-Tech. Phys., 55 (1957), 1708–1718.Google Scholar
[4]Knott, E.F.; Senior, T.B.A.: Comparison of three high-frequency diffraction techniques. Proc. IEEE., 62 (1974), 1468–1474.Google Scholar
[5]Harrington, R.F.: Matrix methods for field problems. Proc. IEEE., 55 (1967), 136–149.Google Scholar
[6]Rokhlin, V.: Rapid solution of integral equations of scattering theory in two dimensions. J. Comput. Phys., 86 (1990), 414–439.Google Scholar
[7]Bouché, D.P.; Molinet, F.A.; Mittra, R.: Asymptotic and hybrid techniques for electromagnetic scattering. Proc. IEEE., 81 (1993), 1658–1684.Google Scholar
[8]Mautz, J.R.; Harrington, R.F: H-field, E-field and combined-field solutions for conducting body of revolution. Arch. Elektron. Ubertragungstechn., 32 (1978), 157–164.Google Scholar
[9]Jian-Ming, J.: Theory and Computation of Electromagnetic Fields, IEEE Press and John Wiley & Sons, Inc., New Jersey, 2010.Google Scholar
[10]Balanis, C.A.: Antenna Theory: Analysis and Design, John Wiley & Sons, Inc., New York, 2005.Google Scholar
[11]Joubert, J.; Odendaal, J.W.; Mayhew-Ridgers, G.: On primary incident wave models for pyramidal horn gain calculations. IEEE Trans. Antennas Propag., 48 (2000), 1246–1252.CrossRefGoogle Scholar
[12]Haderer, A.; Scherz, P.; Stelzer, A.: Position estimation of thin, conducting plates at mm-wave frequencies utilizing polarimetric effects, in IEEE MTT-S Int. Microwave Symp. Digest 2011, Baltimore, 2011.Google Scholar
[13]Pozar, D.M.: Microwave Engineering, 3rd ed.John Wiley & Sons, Inc., New Jersey, 2005.Google Scholar
[14]Kay, S.M.: Fundamentals of Statistical Signal Processing, vol. I: Estimation Theory, Prentice Hall, Englewood Cliffs Upper Saddle River, NJ, 1993Google Scholar
[15]Golub, G.H.; Pereyra, V.: The differentiation of pseudoinverses and nonlinear least squares problems whose variables separates. SIAM J. Numer. Anal., 10 (1973), 413–432.Google Scholar
[16]Nelder, J.A.; Mead, R.: A simplex method for function minimization. Comput. j., 7 (1965), 308–313.Google Scholar