Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-26T11:14:01.027Z Has data issue: false hasContentIssue false

Miniaturized printed monopole antenna with applying the modified conductor-backed plane and three embedded strips based on CPW for multi-band telecommunication devices

Published online by Cambridge University Press:  10 December 2014

Mohammad Alibakhshi-Kenari*
Affiliation:
School of Electrical and Communication Engineering, Shahid Bahonar University, Kerman, Iran
*
Corresponding author: M. Alibakhshi-Kenari Email: [email protected], [email protected]

Abstract

In this article, a new construction of a small planar dual-band fed printed monopole antenna based on coplanar waveguide is suggested. Impedance matching for dual-band operations is obtained by embedding three vertical strips with different sizes in the U-shaped conductor-backed plane. The main problem of the designed antenna is the measuring of the specifications with the Agilent 8722ES Vector Network Analyzer, when the coaxial cable is connected to the antenna. Hence, in this paper a new method for decoupling the cable from the antenna is presented. This method is based on using the ferrite bead. The ferrite bead reduces the cable radiation, so that its position plays the important part in the antenna radiation characteristics. The fabricated antenna includes the benefits of the miniaturized size and dual-band operating specifications, so that the mentioned properties have been achieved without modifying the coplanar-waveguide-ground surface or radiator patch. The antenna has the small size of 15 × 15 × 0.8 mm3and bandwidths with S11 < −10 dB about 2.2 GHz (5.05–7.25 GHz) for WLAN-band or IEEE 802.11a-band and 5.2GHz (7.6–12.8 GHz) for X-band, which correspond to 36 and 51% practical bandwidths, respectively. The antenna measured peak gains are about 1.8 dBi at WLAN-band and 4.3 dBi at X-band.

Type
Online Only Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Wu, S.J.; Kang, C.H.; Chen, K.H.; Tarng, J.H.: Study of an ultra wideband monopole antenna with a band-notched open-looped resonator. IEEE Trans Antennas Propag., 58 (6) (2010), 18901897.Google Scholar
[2] Wu, Q.; Jin, R.; Ding, M.: Printed omnidirectional UWB monopole antenna with very compact size. IEEE Trans Antennas Propag., 56 (2008), 896899.Google Scholar
[3] Yuan, Z.-X.; Yin, Y.-Z.; Ding, Y.; Li, B.; Xie, J.J.: Multiband printed and double-sided dipole antenna for WLAN/WiMAX applications. Microw. Opt. Technol. Lett., 54 (2012), 10191022.Google Scholar
[4] Alibakhshi Kenari, M.: Introducing the new wide band small plate antennas with engraved voids to form new geometries based on CRLH MTM-TLs for wireless applications. Int. J. Microw. Wirel. Technol., (2014), 19, doi: http://dx.doi.org/10.1017/S1759078714000099.Google Scholar
[5] Alibakhshi Kenari, M.: Printed planar patch antennas based on metamaterial. Int. J. Electron. Lett., 2 (1) (2014), 3742. http://dx.doi.org/10.1080/21681724.2013.874042.Google Scholar
[6] Liu, W.C.; Wu, C.M.; Dai, Y.: Design of triple-frequency microstrip-fed monopole antenna using defected ground structure. IEEE Trans. Antennas Propag., 10 (2011), 24572463.CrossRefGoogle Scholar
[7] Li, X.; Hu, W.; Wang, Y.F.; Shi, X.W.; Gu, X.T.: Printed triple-band rectangular ring monopole antenna with symmetrical L-strips for WLAN/WiMAX applications. Microw. Opt. Technol. Lett., 54 (2012), 10491052.CrossRefGoogle Scholar
[8] Xu, P.; Yan, Z.-H.; Wang, C.: Multi-band modified fork-shaped monopole antenna with dual L-shaped parasitic plane. Electron. Lett., 46 (2011), 364365.Google Scholar
[9] Yoon, J.H.; Lee, Y.C.R.: Design of a microstrip-fed monopole antenna with a rectangular slit ground and a rectangular projection strip for dual-band WLAN operations. Microw. Opt. Technol. Lett., 54 (2012), 10391044.CrossRefGoogle Scholar
[10] Cai, L.Y.; Zeng, G.; Yang, H.C.; Cai, Y.Z.: Integrated bluetooth and multi-band ultra-wideband antenna. Electron. Lett., 46 (2011), 688689.Google Scholar
[11] Ghatak, R.; Goswami, C.; Mishra, R.K.; Poddar, D.R.: A CPW fed planar monopole antenna with modified H shaped slot for WLAN/Wi-MAX application. Microw. Opt. Technol. Lett., 54 (2012), 12961301.CrossRefGoogle Scholar
[12] Singh, K.; Mulgi, S.N.: Design and development of U-notched corner truncated square microstrip antenna for X to Ku band operation. Microw. Opt. Technol. Lett., 55 (2013), 719723.Google Scholar
[13] Liao, X.-J.; Yang, H.-C.; Han, N.; Li, Y.: UWB antenna with dual narrow band notches for lower and upper WLAN bands. Electron. Lett., 46 (2010), 15931594.Google Scholar
[14] Li, Y.; Zhang, Z.; Zheng, J.; Feng, Z.: Compact heptaband reconfigurable loop antenna for mobile handset. IEEE Antennas Wirel. Propag. Lett., 10 (2011), 11621165.CrossRefGoogle Scholar
[15] Malekpoor, H.; Jam, S.: Design of a multiband asymmetric patch antennal for wireless applications. Microw. Opt. Technol. Lett., 55 (2013), 730734.Google Scholar
[16] Lee, C.J.; Achour, M.; Gummalla, A.: Compact metamaterial high isolation MIMO antenna subsystem, in proc. Asia Pacific Microwave Conf. (APMC), pp. 14, 2008, Macau-China.Google Scholar
[17] Yu, C.-C.; Huang, M.-H.; Lin, L.-K.; Chang, Y.-T.: A compact antenna based on MTM for WiMAX, Asia-Pacific Microwave Conf., (APMC), 16–20 December 2008, Macau-China.Google Scholar