Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-23T12:57:11.087Z Has data issue: false hasContentIssue false

A dual notched band UWB-BPF based on microstrip-to-short circuited CPW transition

Published online by Cambridge University Press:  21 May 2018

Abu Nasar Ghazali*
Affiliation:
School of Electronics, Kalinga Institute of Industrial Technology, Bhubaneswar, 751024, India
Mohd Sazid
Affiliation:
Department of Electronics and Communication Engineering, Noida Institute of Engineering and Technology, Greater Noida, 201306, India
Srikanta Pal
Affiliation:
Department of Electronics and Communication Engineering, Birla Institute of Technology, Mesra, Ranchi, 835215, India
*
Author for correspondence: Abu Nasar Ghazali, E-mail: [email protected]

Abstract

This paper proposes a dual notched band ultra-wideband (UWB) bandpass filter (BPF) based on hybrid transition of microstrip and coplanar waveguide (CPW). The CPW in ground plane houses a stepped impedance resonator shorted at ends, and is designed to place its resonant modes within the UWB passband. The microstrips on the top plane are placed some distance apart in a back-to-back manner. The transition of microstrip on top and shorted CPW in the ground is coupled through the dielectric in a broadside manner. The optimized design of the transition develops the basic UWB spectrum with good return/insertion loss and extended stopband. Later, defected ground structure, embedded in CPW, and split ring resonators, coupled to feeding lines are utilized to develop dual sharp passband notches. The simulated data are verified against the experimentally developed prototype. The proposed dual notched UWB-BPF structure measures only 14.6 × 7.3 mm2, thereby justifying its compactness.

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Revision of Part 15 of the Commission's Rules Regarding Ultra-Wideband Transmission Systems’, First Note and Order Federal Communications Commission, ET-Docket, 2002, 98153.Google Scholar
2.Wu, HW and Chen, YF (2012) New compact ultra wideband bandpass filter using modified multi- mode resonator. International Journal of Electronics and Communications (AEÜ) 66, 10211025.Google Scholar
3.Chu, QX and Huang, JQ (2010) Compact ultra-wideband filter with dual notched bands based on complementary split ring resonators. Microwave and Optical Technology Letters 52, 25092512.Google Scholar
4.Liu, BW, et al. (2011) Compact UWB bandpass filter with two notched bands based on electromagnetic bandgap structures. Electronics Letters 47, 757758.Google Scholar
5.Liu, BW, et al. (2012) Design of compact UWB bandpass filter with dual notched bands using novel SCRLH resonator. Microwave and Optical Technology Letters 54, 15061508.Google Scholar
6.Zhao, J, et al. (2013) Compact microstrip UWB bandpass filter with dual notched bands using E-shaped resonator. IEEE Microwave and Wireless Components Letters 23, 638640.Google Scholar
7.Nouri, S, et al. (2017) Design and analysis of compact BPF with dual notch bands based on stepped-impedance resonator for UWB applications. Microwave and Optical Technology Letters 59, 672674.Google Scholar
8.Wei, F, et al. (2013) Ultra-wideband band-pass filter with dual narrow notched bands based on dual-mode stepped impedance resonator. Microwave and Optical Technology Letters 55, 727730.Google Scholar
9.Song, K and Xue, Q (2010) Compact ultra-wideband (UWB) bandpass filters with multiple notched bands. IEEE Microwave and Wireless Components Letters 20, 447449.Google Scholar
10.Mohammadi, B, et al. (2015) Design of a compact dual-band-notch ultra-wideband bandpass filter based on wave cancellation method. IET Microwaves, Antennas & Propagation 9, 19.Google Scholar
11.Ghazali, A and Singh, A (2016) Band Notched UWB-BPF based on broadside coupled microstrip/CPW transition. IETE Journal of Research 62, 686693.Google Scholar
12.Ghazali, A and Singh, A (2014) Broadside coupled UWB filter with dual notched band and extended upper stopband. International Conference on Devices, Circuits and Communications (ICDCCom), 1–5.Google Scholar
13.Song, Y, Yang, GM and Geyi, W (2014) Compact UWB bandpass filter with dual notched bands using defected ground structures. IEEE Microwave and Wireless Components Letters 24, 230232.Google Scholar
14.Ghazali, A and Pal, S (2013) Planar ultra-wideband filter with triple notches and improved out-of-band performance. IEEE MTT-S International Microwave and RF Conference, 1–4.Google Scholar
15.Ghazali, A and Pal, S (2013) Microstrip based UWB filter with controllable multiple notches and extended upper stopband. International Conference on Emerging Trends in Communications, Control, Signal Processing and Computing Applications (C2SPCA), 1–5.Google Scholar
16.Baik, JW, Lee, TH and Kim, YS (2007) UWB bandpass filter using microstrip-to-CPW transition with broadband balun. IEEE Microwave and Wireless Components Letters 17, 846848.Google Scholar
17.Gao, J, et al. (2005) Short-circuited CPW multiple-mode resonator for ultra-wideband (UWB) bandpass filter. IEEE Microwave and Wireless Components Letters 16, 104106.Google Scholar
18.Zhu, L, Sun, S and Menzel, W (2005) Ultra-wideband (UWB) bandpass filters using multiple-mode resonator. IEEE Microwave and Wireless Components Letters 15, 796798.Google Scholar
19.Sun, S and Zhu, L (2009) Multiple-mode-resonator-based bandpass filters for ultrawideband transmission systems. IEEE Microwave Magazine 10, 8898.Google Scholar