Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-23T14:21:39.943Z Has data issue: false hasContentIssue false

Design of elliptical-shaped reconfigurable patch antenna with shunt capacitive RF-MEMS switch for satellite applications

Published online by Cambridge University Press:  17 December 2020

Bokkisam Venkata Sai Sailaja
Affiliation:
Department of Electronics and Communication Engineering, KLEF (Deemed to be University), Vaddeswaram, Guntur522502, India
Ketavath Kumar Naik*
Affiliation:
Department of Electronics and Communication Engineering, KLEF (Deemed to be University), Vaddeswaram, Guntur522502, India
*
Author for correspondence: Ketavath Kumar Naik, E-mail: [email protected]

Abstract

In this paper, non-uniform meandered line shunt capacitive RF-MEMS switch is presented at an elliptical patch etched with a split-ring resonator (SRR) for satellite communication applications. The non-uniform meander line shunt capacitive is a fixed-fixed type of RF-MEMS switch that is introduced in this model antenna. The proposed antenna design is resonated at 10.46 GHz with the return loss of −37.6 dB. The performance evolution of the proposed antenna design is evaluated with and without integrated RF-MEMS switch on the proposed antenna SRR. It is observed that the proposed model at the ON-state switch resonates at 10.57 GHz frequency with the return loss of −30 dB. Similarly, at the OFF-state switch, it resonates at 10.53 GHz frequency with the return loss of −43 dB. Al3N4 (aluminum nitride) is used for the switch as a dielectric material, hence the switch attains higher isolation. The actuation voltage of 7.9 V is required for the switch to actuate from ON to OFF state. The switch attains minimum insertion and return loss which is discussed in further sections. The proposed antenna is fabricated and tested by a vector network analyzer; there is a good agreement between the simulated and measured results.

Type
Antenna Design, Modelling and Measurements
Copyright
Copyright © The Author(s), 2020. Published by Cambridge University Press in association with the European Microwave Association

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Pozar, D (1986) An update on microstrip antenna theory and design including some novel feeding techniques. IEEE Antennas and Propagation Magazine 28, 49.Google Scholar
Peroulis, D, Sarabandi, K and Katehi, LP (2005) Design of reconfigurable slot antennas. IEEE Transactions on Antennas and Propagation 53, 645654.CrossRefGoogle Scholar
Liu, SF, Shi, XW and Liu, SD (2007) Study on the impedance-matching technique for high-temperature superconducting microstrip antennas. Progress In Electromagnetics Research 77, 281284.CrossRefGoogle Scholar
Gupta, A, Joshi, HD and Khanna, R (2017) An X-shaped fractal antenna with DGS for multiband applications. International Journal of Microwave and Wireless Technologies 9, 10751083.CrossRefGoogle Scholar
Pozar, DM (2009) Microwave Engineering. John Wiley & Sons.Google Scholar
Garg, R, Bhartia, P, Bahl, IJ and Ittipiboon, A (2001) Microstrip Antenna Design Handbook. Artech house.Google Scholar
Attaran, A and Rashidzadeh, R (2015) Ultra low actuation voltage RF MEMS switch. Micro and Nanosystem 3, 7.Google Scholar
Manivannan, M, Daniel, RJ and Sumangala, K (2014) Low actuation voltage RF MEMS switch using varying section composite fixed-fixed beam. International Journal of Microwave Science and Technology 2014, 113.CrossRefGoogle Scholar
Hah, D and Hong, S (2000) A low voltage actuated micromachined microwave switch using torsion springs and leverage. IEEE Transactions on Microwave Theory and Techniques 48, 25402545.Google Scholar
Park, JY, Kim, GH, Chung, KW and Bu, JU (2001) Monolithically integrated micromachined RF MEMS capacitive switches. Sensors and Actuators A: Physical 89, 8894.CrossRefGoogle Scholar
Kolte, V and Mahajan, PM (2014) Design and analysis of non-uniform shaped RF MEMS switch. Journal of Computational Electronics 13, 547554.CrossRefGoogle Scholar
Cetiner, BA, Jafarkhani, H, Qian, JY, Yoo, HJ, Grau, A and De Flaviis, F (2004) Multifunctional reconfigurable MEMS integrated antennas for adaptive MIMO systems. IEEE Communications Magazine 42, 6270.CrossRefGoogle Scholar
Huff, GH and Bernhard, JT (2006) Integration of packaged RF MEMS switches with radiation pattern reconfigurable square spiral microstrip antennas. IEEE Transactions on Antennas and Propagation 54, 464469.CrossRefGoogle Scholar
Mak, AC, Rowell, CR, Murch, RD and Mak, CL (2007) Reconfigurable multiband antenna designs for wireless communication devices. IEEE Transactions on Antennas and Propagation 55, 19191928.CrossRefGoogle Scholar
Hong, S, Kim, W, Park, H, Kahng, S and Choi, J (2008) Design of an internal multiresonant monopole antenna for GSM900/DCS1800/US-PCS/S-DMB operation. IEEE Transactions on Antennas and Propagation 56, 14371443.CrossRefGoogle Scholar
Vähä-Heikkilä, T and Rebeiz, GM (2004) A 4–18-GHz reconfigurable RF MEMS matching network for power amplifier applications. International Journal of RF and Microwave Computer-Aided Engineering 14, 356372.CrossRefGoogle Scholar
Brown, ER (1998) RF-MEMS switches for reconfigurable integrated circuits. IEEE Transactions on Microwave Theory and Techniques 46, 18681880.CrossRefGoogle Scholar
Simons, RN, Chun, D and Katehi, LPB (2001) Reconfigurable array antenna using microelectromechanical systems (MEMS) actuators. IEEE Antennas and Propagation Society International Symposium 3, 674677.Google Scholar
Badía, MF-B, Nicole, P and Ionescu, AM (2011) RF-MEMS switches with AlN dielectric and their applications. International Journal of Microwave and Wireless Technologies 3, 509520.CrossRefGoogle Scholar
Tariq, A and Ghafouri-Shiraz, H (2012) Frequency-reconfigurable monopole antennas. IEEE Transactions on Antennas and Propagation 60, 4450.CrossRefGoogle Scholar
Kakhki, MB and Rezaei, P (2017) Reconfigurable microstrip slot antenna with DGS for UWB applications. International Journal of Microwave and Wireless Technologies 9, 15171522.CrossRefGoogle Scholar
Sharma, S, Tripathi, CC and Rishi, R (2018) A versatile reconfigurable antenna with integrated sensing mechanism. International Journal of Microwave and Wireless Technologies 10, 469478.CrossRefGoogle Scholar
Morabito, AF, Di Donato, L and Isernia, T (2018) Orbital angular momentum antennas: understanding actual possibilities through the aperture antennas theory. IEEE Antennas and Propagation Magazine 60, 5967.CrossRefGoogle Scholar
Ali, T, Khaleeq, MM and Biradar, RC (2018) A multiband reconfigurable slot antenna for wireless applications. AEU-International Journal of Electronics and Communications 84, 273280.CrossRefGoogle Scholar
Li, L, Wu, Z, Li, K, Yu, S, Wang, X, Li, T, Li, G, Chen, X and Zhai, H (2014) Frequency-reconfigurable quasi-Sierpinski antenna integrating with dual-band high-impedance surface. IEEE Transactions on Antennas and Propagation 62, 44594467.CrossRefGoogle Scholar
Yang, XS, Wang, BZ, Wu, W and Xiao, S (2007) Yagi patch antenna with dual-band and pattern reconfigurable characteristics. IEEE Antennas and Wireless Propagation Letters 6, 168171.CrossRefGoogle Scholar
Clemente, A, Dussopt, L, Sauleau, R, Potier, P and Pouliguen, P (2012) 1-Bit reconfigurable unit cell based on PIN diodes for transmit-array applications in X-band. IEEE Transactions on Antennas and Propagation 60, 22602269.CrossRefGoogle Scholar
Kumar Naik, K and Amala Vijaya Sri, P (2018) Design of hexadecagon circular patch antenna with DGS at Ku band for satellite communications. Progress In Electromagnetics Research 63, 163173.CrossRefGoogle Scholar