Hostname: page-component-cd9895bd7-gvvz8 Total loading time: 0 Render date: 2024-12-24T00:45:37.714Z Has data issue: false hasContentIssue false
  • English
  • Français

Design, fabrication, and test of a novel broadband dual-polarized microstrip antenna for WLAN applications

Published online by Cambridge University Press:  21 November 2018

Majid Karimipour  and
Iman Aryanian
Majid Karimipour*
Affiliation:
Iran Telecommunication Research Center, Tehran, Iran
Iman Aryanian
Affiliation:
Iran Telecommunication Research Center, Tehran, Iran
*
Author for correspondence: Majid Karimipour, E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

A dual-polarized dual-layer wideband microstrip antenna is presented. Dual orthogonal linear polarization and enhanced isolation between two ports are achieved by employing two radiating patches perpendicular to each other and printed on two separate substrates. Broadband behavior of the antenna is realized by using two wideband double-sided printed strip dipole and angular ring as radiating patches along with wideband baluns as feeding system. The patches are connected to baluns with two separate twin-lead transmission lines. Moreover, to improve the impedance bandwidth of the strip dipole significantly, a diamond-shape parasitic patch is artily incorporated into the top side of the upper layer of the antenna. The proposed antenna can easily be employed in large-scale arrays thanks to the feeding system of the patches. A prototype is fabricated to verify the simulation results where the measurement results show the −10 dB impedance bandwidths of 40% (4.3–6.5 GHz) and 43% (4.2–6.5 GHz) at port #1 and port #2, respectively. Besides, the isolation between two ports and the radiation gain are obtained around 35 dB and 9 dBi, respectively, which are useful for WLAN applications.

Keywords

Dual-polarized antennaprinted double-sided patchwideband balun
Type
Research Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 11 , Issue 3 , April 2019 , pp. 297 - 301
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Ge, Y, Esselle, KP and Bird, TS (2004) E-shaped patch antennas for high-speed wireless networks. IEEE Transactions on Antennas and Propagation 52 3213–3219.Google Scholar
2.Gou, Y, Yang, S, Li, J and Nie, Z (2014) A compact dual-polarized printed dipole antenna with high isolation for wideband base station applications. IEEE Transactions on Antennas and Propagation 62, 4392–4395.Google Scholar
3.Huang, H, Liu, Y and Gong, SA (2017) broadband dual-polarized base station antenna with sturdy construction. IEEE Antennas and Wireless Propagation Letters 16, 665–668.Google Scholar
4.Liu, Y, Yi, H, Wang, F-W and Gong, S-X (2013) A novel miniaturized broadband dual-polarized dipole antenna for base station. IEEE Antennas and Wireless Propagation Letters 12, 1335–1338.Google Scholar
5.Ram Krishna, RVS and Kumar, R (2013) Design of dual-polarized asymmetrically feed slotted rectangular printed monopole antenna. Progress In Electromagnetics Research B 49, 55–76.Google Scholar
6.Wang, M, Wu, W and Fang, WG (2012) Uniplanar single corner-fed dual-band dual-polarization patch antenna array. Progress in Electromagnetics Research 30, 41–48.Google Scholar
7.Zheng, WC, Zhang, L, Li, QX and Leng, Y (2014) Dual-band dual-polarized compact bowtie antenna array for anti-interference MIMO WLAN. IEEE Transactions on Antennas and Propagation 62, 237–246.Google Scholar
8.Luo, K, Ding, W, Hu, Y-J and Cao, W-Q (2013) Design of dual-feed dual-polarized microstrip antenna with high isolation and low cross polarization. Progress In Electromagnetics Research 36, 31–40.Google Scholar
9.Wong, H, Lau, K-L and Luk, K-M (2004) Design of dual-polarized L-probe patch antenna arrays with high isolation. IEEE Transactions on Antennas and Propagation 52, 45–52.Google Scholar
10.Wong, KL and Chiou, T-W (2002) Broad-band dual-polarized patch antennas fed by capacitively coupled feed and slot-coupled feed. IEEE Transactions on Antennas and Propagation 50, 346–351.Google Scholar
11.Chiou, T-W and Wong, K-L (2002) Broad-band dual-polarized single microstrip patch antenna with high isolation and low cross polarization feed. IEEE Transactions on Antennas and Propagation 50, 399–401.Google Scholar
12.King, S-G and Chang, K (2004) Ultra wide-band transitions and new microwave components using double-sided parallel-strip lines. IEEE Transactions on Microwave Theory and Techniques 52, 2148–2152.Google Scholar
13.Tefiku, F and Grimes, CA (2000) Design of broad-band and dual-band antennas comprised of series-fed printed-strip dipoles pairs. IEEE Transactions on Antennas and Propagation 48, 895–900.Google Scholar
14.Pozar, DM (2006) Microwave Engineering. New York: Wiley.Google Scholar
15.Huang, JF and Liang, JW (2008) Printed and double-sided dipole array antennas with a parallel reflector. Microwave and Optical Technology Letters 50, 593–600.Google Scholar
16.Kandwal, A and Khah, SK (2013) A novel design of gap-coupled sectoral patch antenna. IEEE Antennas and Wireless Propagation Letters 12, 674–677.Google Scholar
17.Stutzman, WL and Thiele, GA (1998) Antenna Theory and Design, 2nd Edn. New York: Wiley.Google Scholar