Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-25T20:11:10.805Z Has data issue: false hasContentIssue false
  • English
  • Français

Compact integrated slot array antennas for the 79 GHz automotive band

Published online by Cambridge University Press:  07 July 2010

Lars Pettersson ,
Shi Cheng ,
Michael Salter ,
Anders Rydberg  and
Duncan Platt
Lars Pettersson*
Affiliation:
Acreo AB – Innovative Electronics, Box 787, SE-601 17, Norrköping, Sweden.
Shi Cheng
Affiliation:
Uppsala University, Signal and Systems, Box 54, SE-751 51, Uppsala, Sweden.
Michael Salter
Affiliation:
Acreo AB – Innovative Electronics, Box 787, SE-601 17, Norrköping, Sweden.
Anders Rydberg
Affiliation:
Uppsala University, Signal and Systems, Box 54, SE-751 51, Uppsala, Sweden.
Duncan Platt
Affiliation:
Acreo AB – Innovative Electronics, Box 787, SE-601 17, Norrköping, Sweden.
*
Corresponding author: L. Pettersson Email: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper presents two compact slot array antennas for the 79 GHz automotive band integrated into a 28 µm thick benzocyclobutene (BCB) substrate attached to a 325 µm thick 5–20 Ω cm bulk resistivity silicon wafer. The two antennas are a transmit (TX) 1 × 8 slot array antenna with a size of 1 × 23 mm and a receive (RX) 8 × 8 slot array antenna with a size of 15 × 23 mm. Promising performance has been measured with the TX and RX subarray antennas (gain >4 dBi) with good matching to 50 Ω (RL > 10 dB) in the frequency range 70–90 GHz. By using a metal cavity, mounted on the back of the antenna, potential parallel plate or cavity modes could be reduced and the gain could also be increased by 2 dB. The measured and the simulated results are consistent.

Keywords

Integrated slot antennaMillimeter wave antennaParallel mode suppression
Type
Original Article
Information
International Journal of Microwave and Wireless Technologies , Volume 2 , Special Issue 3-4: European Microwave Week 2009 , August 2010 , pp. 305 - 316
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Platt, D.; Pettersson, L.; Salter, M.; Jakonis, D.; Haglund, J.: Integrated 79 GHz UWB automotive radar front-end based on Hi-Mission MCM-D silicon platform, in 6th European Radar Conf., Rome, Italy, October 2009.CrossRefGoogle Scholar
[2]Gresham, I. et al. : A compact manufacturable 76–77-GHz radar module for commercial ACC applications. IEEE Trans. Microw. Theory Tech., 49 (1) (2001).Google Scholar
[3]Cheng, S.; Rydberg, A.; Hallbjorner, P.; Pettersson, L.; Salter, M.; Platt, D.: Millimeter-wave tapered slot antenna for integration on micromachined low resistivity silicon substrates, in IEEE International Workshop on Antenna Technology, iWAT, Santa Monica, USA, March 2009.Google Scholar
[4]Newman, E.H.; Thiele, G.A.: Some important properties in the designs of T-Bar fed slot. IEEE Trans. Antennas Propag., AP-23 (1) (1975), 97–100.CrossRefGoogle Scholar
[5]2T204, http://www.catrene.org/web/downloads/profiles_medea/2T401_profile.pdfGoogle Scholar