Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-25T17:15:19.106Z Has data issue: false hasContentIssue false

An ultra-thin polarization independent quad-band microwave absorber-based on compact metamaterial structures for EMI/EMC applications

Published online by Cambridge University Press:  03 April 2018

Naveen Mishra
Affiliation:
Department of Electronics Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, Jharkhand-826004, India
Khusboo Kumari
Affiliation:
Department of Electronics Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, Jharkhand-826004, India
Raghvendra Kumar Chaudhary*
Affiliation:
Department of Electronics Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, Jharkhand-826004, India
*
Author for correspondence: Raghvendra Kumar Chaudhary, E-mail: [email protected];

Abstract

In this paper, a compact metamaterial inspired ultra-thin polarization independent quad-band microwave absorber for electromagnetic interference (EMI)/ electromagnetic compatibility (EMC) applications have been discussed. The proposed absorber structure offers four different absorption peaks having absorptivity of 97.02, 94.07, 91.72, and 98.20% at 3.40, 8.23, 9.89, and 11.80 GHz, respectively. Due to the four-fold symmetry of the designed unit cell, the proposed absorber structure shows polarization independent behavior. In addition to above, the absorption curve for the designed structure has been also analyzed under different angles of incidence for both transverse electric and transverse magnetic polarization states. In order to confirm the metamaterial behavior of the proposed absorber unit cell, dispersion plot has been studied. Further, input impedance plot, electric field, and surface current distribution plot have been discussed to explain the absorption mechanism of the proposed absorber structure. The designed absorber unit cell shows compactness of 0.136 λ0 × 0.136 λ0 with the ultra-thin thickness of 0.0113 λ0, where λ0 (free space wavelength) corresponds to the lowest absorption peak of 3.40 GHz. In order to calculate the measured value of absorptivity, the designed absorber structure has been fabricated. Further, it has been observed that simulated and measured results perfectly match with each other. The ultra-thin and compact nature of the proposed absorber structure suggests its potential use in the field of various EMI/EMC applications.

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Caloz, C and Itoh, T (2006) Electromagnetic Metamaterials: Transmission Line Theory and Microwave Applications. Hoboken, NJ: John Wiley & Sons, Inc.Google Scholar
2.Shelby, RA, Smith, DR and Schultz, S (2001) Experimental verification of a negative index of refraction. Science 292, 7779.CrossRefGoogle ScholarPubMed
3.Veselago, VG (1968) The electrodynamics of substances with simultaneously negative values of ε and μ. Soviet Physics Uspekh 10, 509514.Google Scholar
4.Mishra, N and Chaudhary, RK (2016) A miniaturized ZOR antenna with enhanced bandwidth for WiMAX applications. Microwave and Optical Technology Letters 58, 7175.Google Scholar
5.Mishra, N, Gupta, A and Chaudhary, RK (2015) A compact CPW-FED wideband metamaterial antenna using Ω-shaped interdigital capacitor for mobile application. Microwave and Optical Technology Letters 57, 25582562.Google Scholar
6.Fouad, MA and Abdalla, MA (2014) New π-T generalised metamaterial negative refractive index transmission line for a compact coplanar waveguide triple band pass filter applications. IET Microwaves, Antennas & Propagation 8, 10971104.Google Scholar
7.Bilotti, F, Tricarico, S and Vegni, L (2010) Plasmonic metamaterial cloaking at optical frequencies. IEEE Transactions on Nanotechnology 9, 5561.CrossRefGoogle Scholar
8.Fang, N, et al. (2005) Sub – diffraction – limited optical imaging with a silver super lens. Science 308, 534537.CrossRefGoogle Scholar
9.Bilotti, F, Nucci, L and Vegni, L (2006) An SRR based microwave absorber. Microwave and Optical Technology Letters 48, 21712175.CrossRefGoogle Scholar
10.Li, H, et al. (2011) Ultrathin multiband gigahertz metamaterial absorbers. Journal of Applied Physics 110, 014909.CrossRefGoogle Scholar
11.Ghosh, S, Bhattacharyya, S and Srivastava, KV (2014) Bandwidth – enhancement of an ultrathin polarization insensitive metamaterial absorber. Microwave and Optical Technology Letters 56, 350355.Google Scholar
12.Landy, NI, et al. (2008) Perfect metamaterial absorber. Physical Review Letters 100, 207402.Google Scholar
13.Dimitriadis, A, Kantartzis, N and Tsiboukis, T (2012) A Polarization – angle – insensitive, bandwidth – optimized, metamaterial absorber in the microwave regime. Applied Physics A 109, 10651070.Google Scholar
14.Grant, J, et al. (2011) Polarization insensitive, broadband terahertz metamaterial absorber. Optics Letters 36, 34763478.CrossRefGoogle ScholarPubMed
15.Avitzour, Y, Urzhumov, YA and Shvets, G (2009) Wide – angle infrared absorber based on a negative – index plasmonic metamaterial. Physical Review B 79, 045131.Google Scholar
16.Meng, L, et al. (2013) Polarization – sensitive perfect absorbers at near – infrared wavelengths. Optics Express 21, A111A122.Google Scholar
17.Thummaluru, SR, Mishra, N and Chaudhary, RK (2016) Design and analysis of an ultra-thin X-band polarization – insensitive metamaterial absorber. Microwave and Optical Technology Letters 58, 24812485.Google Scholar
18.Zhai, H, et al. (2013) A dual-band wide-angle polarization-insensitive ultrathin gigahertz metamaterial absorber. Microwave and Optical Technology Letters 55, 16061609.Google Scholar
19.Bagci, F and Medina, F (2017) Design of a wide-angle, polarization-insensitive, dual-band metamaterial-inspired absorber with the aid of equivalent circuit model. Journal of Computational Electronics 16, 913921.Google Scholar
20.Bian, B, et al. (2013) Novel triple-band polarization-insensitive wide-angle ultra-thin microwave metamaterial absorber. Journal of Applied Physics 114, 194511.CrossRefGoogle Scholar
21.Mishra, N, et al. (2017) An investigation on compact ultra-thin triple band polarization independent metamaterial absorber for microwave frequency applications. IEEE Access 5, 43704376.Google Scholar
22.Zhai, H, et al. (2015) A triple-band ultrathin metamaterial absorber with wide angle and polarization stability. IEEE Antennas and Wireless Propagation Letters 14, 241244.Google Scholar
23.Zheng, D, et al. (2013) Four-band polarization-insensitive metamaterial absorber based on flower-shaped structures. Progress In Electromagnetic Research 142, 221229.Google Scholar
24.Agarwal, M, Behera, AK and Meshram, MK (2016) Wide-angle quad-band polarisation-insensitive metamaterial absorber. Electronics Letters 52(5), 340342.CrossRefGoogle Scholar
25.Chaurasiya, D, et al. (2016) Compact multi-band polarisation-insensitive metamaterial absorber. IET Microwaves, Antennas & Propagation 10(1), 94101.Google Scholar
26.Huang, L and Chen, H (2011) Multi-band and polarization insensitive metamaterial absorber. Progress In Electromagnetics Research 113, 103110.Google Scholar
27.Mehdipour, A, Denidni, TA and Sebak, AR (2014) Multi-band miniaturized antenna loaded by ZOR and CSRR metamaterial structureswith monopolar radiation pattern. IEEE Transactions on Antennas and Propagation 62, 555562.Google Scholar
28.Smith, DR, et al. (2005) Electromagnetic parameter retrieval from inhomogeneous metamaterials. Physical Review E 71, 036617.CrossRefGoogle ScholarPubMed