Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-19T06:13:36.173Z Has data issue: false hasContentIssue false
  • English
  • Français

Correlation of plume morphologies on joint surfaces with their fracture mechanic implications

Published online by Cambridge University Press:  13 June 2008

D. BAHAT ,
A. RABINOVITCH  and
V. FRID
D. BAHAT*
Affiliation:
Department of Geological and Environmental Sciences Ben Gurion University of the Negev, POB 653 Beer Sheva, 84105Israel, and the Deichmann Rock Mechanics Laboratory of the Negev
A. RABINOVITCH
Affiliation:
Department of Physics, Ben Gurion University of the Negev, POB 653 Beer Sheva, 84105Israel, and the Deichmann Rock Mechanics Laboratory of the Negev
V. FRID
Affiliation:
Department of Geological and Environmental Sciences Ben Gurion University of the Negev, POB 653 Beer Sheva, 84105Israel, and the Deichmann Rock Mechanics Laboratory of the Negev
*
‡Author for correspondence: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

The fractography and conditions of propagation of joints that cut Devonian siltstones in the Appalachian Plateau, New York, and Eocene chalks from the Beer Sheva Syncline, Israel, are investigated. The joints cutting the siltstones are marked by S-type and C-type plumes, and the joints cutting the Lower Eocene and Middle Eocene chalks are marked by coarse and delicate plumes, respectively. The four plume types propagated under sub-critical (slow propagation) conditions. On the semi-quantitative fracture velocity (v) versus the tensile stress intensity (KI) curves, the S and C plume types fall in the KI=0.073–0.79 MPa m1/2 and v=2×10−4–10−2 m/s and KI=0.073–0.79 MPa m1/2 and v=10−6–10−4 m/s ranges respectively. The coarse and delicate plumes fall in the KI=0.03–0.17 MPa m1/2 and v=10−6–4×10−5 m/s and KI=0.03–0.17 MPa m1/2 and v=10−4–5×10−3 m/s ranges, respectively. Generally, slow plumes are relatively short, show periodicity, and typically exhibit superposition of arrest marks. On the other hand, faster plumes are longer and continuous, occur particularly in thinner layers, and show no superposition of arrest marks. There is a clear distinction between two en échelon segmentation end-members in the joint fringe, the ‘discontinuous breakdown type’ and the ‘continuous breakdown type’. There are also ‘transitional’ variations between the end-members. Only curved ‘discontinuous breakdown type’ boundaries of en échelon fringes can be equated with mirror boundaries.

Keywords

jointingplumesfracture mechanicsboundaries
Type
Original Article
Information
Geological Magazine , Volume 145 , Issue 5 , September 2008 , pp. 733 - 744
Copyright
Copyright © Cambridge University Press 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Atkinson, B. K. & Meredith, P. G. 1987 a. The theory of subcritical crack growth with applications to the minerals and rocks. In Fracture mechanics of rock (ed. Atkinson, B. K.), pp. 111–66. London: Academic Press.CrossRefGoogle Scholar
Atkinson, B. K. & Meredith, P. G. 1987 b. Experimental fracture mechanics data for rocks and minerals. In Fracture mechanics of rock (ed. Atkinson, B. K.), pp. 477–525. London: Academic Press.CrossRefGoogle Scholar
Bahat, D. 1979. Theoretical considerations on mechanical parameters of joint surfaces based on studies on ceramics. Geological Magazine 11, 81–92.CrossRefGoogle Scholar
Bahat, D. 1987. Correlation between styles of fracture markings and orientation of cross fold joints. Tectonophysics 136, 323–333.CrossRefGoogle Scholar
Bahat, D. 1991. Tectonofractography. Heidelberg: Springer-Verlag, 354 pp.CrossRefGoogle Scholar
Bahat, D. 1997. Mechanisms of dilatant en échelon crack formation in jointed layered chalks. Journal of Structural Geology 19, 1375–92.CrossRefGoogle Scholar
Bahat, D. 1999. Single-layer burial joints versus single-layer uplift joints in Eocene chalk from the Beer-Sheva syncline in Israel. Journal of Structural Geology 21, 293–303.CrossRefGoogle Scholar
Bahat, D., Bankwitz, P. & Bankwitz, E. 2003. Pre-uplift joints in granites: Evidence for subcritical and postcritical fracture growth. Bulletin American Geological Society of America 115, 148–65.2.0.CO;2>CrossRefGoogle Scholar
Bahat, D. & Engelder, T. 1984. Surface morphology on cross-fold joints of the Appalachian Plateau, New York and Pennsylvania. Tectonophysics 104, 299–313.CrossRefGoogle Scholar
Bahat, D., Frid, V., Rabinovitch, A. & Palchik, V. 2002. Exploration via electromagnetic radiation and fractographic methods of fracture properties induced by compression in glass-ceramic. International Journal of Fracture 116, 179–94.CrossRefGoogle Scholar
Bahat, D., Grossenbacher, K. & Karasaki, K. 1999. Mechanism of exfoliation joint formation in granitic rocks at Yosemite National Park. Journal of Structural Geology 21, 85–96.CrossRefGoogle Scholar
Bahat, D. & Rabinovitch, A. 1988. Paleostress determination in a rock by a fractographic method. Journal of Structural Geology 10, 193–9.CrossRefGoogle Scholar
Bahat, D., Rabinovitch, A. & Frid, V. 2005. Tensile fracturing in rocks: tectonofractography and electromagnetic radiation methods. Heidelberg: Springer, 569 pp.Google Scholar
Bank-Sills, L. & Schur, D. 1989. On the influence of crack plane orientation in fatigue crack propagation and catastrophic failure. American Society for Testing and Materials, Standard Technical Publication 1020, 497–513.Google Scholar
Bankwitz, P. 1965. Über Klufte I. Beobachtungen im Thüringischen Schiefergebirge. Geologie 14, 241–53.Google Scholar
Bankwitz, P. 1966. Über Klüfte II. Die Bildung der Kluftoberfläche und eine Systematik ihrer Strukturen. Geologie 15, 896–941.Google Scholar
Bankwitz, P., Bankwitz, E., Thomas, R., Wemmer, K. & Kämpf, H. 2004. Age and depth evidence for preexhumation joints in granite plutons: Fracturing during the early cooling stage of felsic rock. In The initiation, propagation and arrest of joints and other fractures (eds Cosgrove, J. W. & Engelder, T.), pp. 25–47. Geological Society of London, Special Publication no. 231.Google Scholar
Broek, D. 1982. Elementary engineering fracture mechanics. Boston: Martinus Nijhoff Publishers, 469 pp.Google Scholar
Cramer, T., Wanner, A. & Gumbsch, P. 2000. Energy dissipation and path instabilities in dynamic fracture of silicon single crystals. Physical Review Letters 85, 788–91.CrossRefGoogle ScholarPubMed
Dibb, T. E., Hughes, D. W. & Poole, A. B. 1983. The identification of critical factors affecting rock durability in marine environments. The Quaternary Journal of Engineering 16, 149–61.Google Scholar
Engelder, E. 2004. Tectonic implications drawn from differences in the surface morphology on two joint sets in the Appalachian Valley and Ridge, Virginia. Geology 32, 413–16.CrossRefGoogle Scholar
Evans, A. G. 1974. Role of inclusions in the fracture of ceramic materials. Journal of Materials Science 9, 1145–52.CrossRefGoogle Scholar
Gerdes, A., Friedl, G., Parrish, R. R. & Finger, F. 2003. High-resolution geochronology of Variscan granite emplacement – the South Bohemian Batholith. Journal of the Czech Geological Society 48 (1–2), 53–4.Google Scholar
Goldbaum, J., Frid, V., Bahat, D. & Rabinovitch, A. 2003. An analysis of complex electromagnetic radiation signals induced by fracture. Measurement Science and Technology 14, 1839–44.CrossRefGoogle Scholar
Hertzberg, R. W. 1976. Deformation and fracture mechanics of engineering materials. New York: John Wiley & Sons Ltd., 605 pp.Google Scholar
Hodgson, R. A. 1961. Classification of structures on joint surfaces. American Journal of Science 259, 493–502.CrossRefGoogle Scholar
Hull, D. 1999. Fractography: Observing, measuring, and interpreting fracture surface topology. Cambridge: Cambridge University Press, 366 pp.Google Scholar
Kerkhof, F. 1975. Bruchmechanische Analyse von Schadensfällen an Gläsern. Glastechnische Berichte 48, 112–24.Google Scholar
Krenkel, E. 1924. Der Syrische Bogen. Centralbatt für Mineralogie, Geologie und Palaeontologie 9, 274–81, 10301–13.Google Scholar
Kulander, B. R., Barton, C. C. & Dean, S. C. 1979. The application of fractography to core and outcrop fracture investigations. Report to U.S.D.O.E. Morgantown Energy Technology Center, METC SP 79/3.Google Scholar
Lacazette, A. & Engelder, T. 1992. Fluid-driven cyclic propagation of a joint in the Ithaca siltstone, Appalachian basin, New York. In Fault Mechanics and transport properties of rocks (eds Evans, B. & Wong, T.), pp. 297–324. London: Academic Press.Google Scholar
Michalske, T. A. 1984. Fractography of slow fracture in glass. In Fractography of ceramic and metal failures (eds J. J. Mecholsky & S. R. Powell), pp. 121–36. ASTM STP 827, Philadelphia.CrossRefGoogle Scholar
Mimran, Y. 1977. Chalk deformation and large-scale migration of calcium carbonate. Sedimentology 24, 333–60.CrossRefGoogle Scholar
Mimran, Y. 1985. Tectonically controlled freshwater carbonate cementation in Chalk. In Carbonate Cements (eds Schneidermann, N. & Harris, P. M.), pp. 371–9. SEPM, Special Publication no. 36.CrossRefGoogle Scholar
Müller, G. & Dahm, T. 2000. Fracture morphology of tensile cracks and rupture velocity. Journal of Geophysical Research 105, 723–38.CrossRefGoogle Scholar
Petrakakis, K. 1997. Evolution of Moldanubian rocks in Austria: review and synthesis. Journal of Metamorphic Geology 15, 203–22.CrossRefGoogle Scholar
Price, N. J. 1974. The development of stress systems and fracture patterns in undeformed sediments. In Proceedings Third Congress of the International Society for Rock Mechanics, Denver, CO, pp. 487–98. Advances in Rock Mechanics 1.Google Scholar
Rabinovitch, A. & Bahat, D. 1979. Catastrophe theory: A technique for crack propagation analysis. Journal of Applied Physics 50, 321–34.CrossRefGoogle Scholar
Rice, R. W. 1974. Fracture topography of ceramics. In Surfaces and interfaces of glass and ceramics (eds Frechette, V. D., Course, W. C. La & Burdick, V. L.), pp. 439–72. New York: Plenum Publishing Corporation.CrossRefGoogle Scholar
Roberts, J. C. 1961. Feather-fracture and the mechanics of rock jointing. American Journal of Science 259, 481–92.CrossRefGoogle Scholar
Roberts, J. C. 1995. Fracture surface markings in Liassic limestone at Lavernock Point, South Wales. In Fractography: Fracture topography as a tool in fracture mechanics and stress analysis (ed. Ameen, M. S.), pp. 175–86. Geological Society of London, Special Publication no. 92.Google Scholar
Savalli, L. & Engelder, T. 2005. Mechanism controlling rupture shape during subcritical growth of joints in layered rocks. Bulletin Geological Society of America 117, 436–49.CrossRefGoogle Scholar
Secor, D. T. Jr. 1965. Role of fluid pressure in jointing. American Journal of Science 263, 633–46.CrossRefGoogle Scholar
Simón, J. L., Arlegui, L. E. & Pocoví, A. 2006. Fringe cracks and plumose structures in layered rocks: stepping senses and their implications for palaeostress interpretation. Journal of Structural Geology 28, 1103–13.CrossRefGoogle Scholar
Sommer, E. 1969. Formation of fracture “lances” in glass. Engineering Fracture Mechanics 1, 539–46.CrossRefGoogle Scholar
Syme-Gash, P. J. 1971. Surface features relating to brittle fracture. Tectonophysics 12, 349–91.CrossRefGoogle Scholar
Tropper, P., Deibl, I., Finger, F. & Kaindl, R. 2006. P–T–t evolution of spinel–cordierite–garnet gneisses from the Sauwald Zone (Southern Bohemian Massif, Upper Austria): is there evidence for two independent late-Variscan low-P/high-T events in the Moldanubian Unit? International Journal of Earth Sciences 95, 1019–37.CrossRefGoogle Scholar
Tschegg, E. K. 1983. Mode 3 and mode 1 fatigue crack propagation behavior under torsional loading. Journal of Materials Science 18, 1604–14.CrossRefGoogle Scholar
Wachtman, J. B. JR. 1974. Highlights of progress in the science of fracture of ceramics and glass. Journal of American Ceramics Society 57, 509–18.CrossRefGoogle Scholar
Wiederhorn, S. M. 1967. Influence of water vapor on crack propagation in soda-lime glass. Journal of American Ceramics Society 50, 407–14.CrossRefGoogle Scholar
Wiederhorn, S. M. & Bolz, L. H. 1970. Stress corrosion and static fatigue of glass. Journal of American Ceramic Society 53, 543–8.CrossRefGoogle Scholar
Woodworth, J. B. 1896. On the fracture system of joints, with remarks on certain great fractures. Proceedings of the Boston Society of Natural History 27, 63–184.Google Scholar