Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-22T10:41:26.409Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and characterization of quaternary ammonium salt and 3-aminopropyltriethoxysilane-modified sericite mica

Published online by Cambridge University Press:  02 July 2021

Chunguang Xiao ,
Feng Lang ,
Yu Xiang ,
Yi Lin  and
Duxin Li Open the ORCID record for Duxin Li [Opens in a new window]
Chunguang Xiao
Affiliation:
State Key Laboratory of Powder Metallurgy, Central South University, Chang sha410083, P.R. China
Feng Lang
Affiliation:
State Key Laboratory of Powder Metallurgy, Central South University, Chang sha410083, P.R. China
Yu Xiang
Affiliation:
State Key Laboratory of Powder Metallurgy, Central South University, Chang sha410083, P.R. China
Yi Lin
Affiliation:
State Key Laboratory of Powder Metallurgy, Central South University, Chang sha410083, P.R. China
Duxin Li*
Affiliation:
State Key Laboratory of Powder Metallurgy, Central South University, Chang sha410083, P.R. China
*
*E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

Modified sericite mica was prepared by combining the intercalation of cetyltrimethylammonium bromide (CTAB) through ion exchange and surface modification of 3-aminopropyltriethoxysilane (KH550) with the following steps: high-temperature activation of sericite mica, acid activation, sodium modification, LiNO3 treatment, the ion-exchange intercalation of the cetyltrimethylammonium cation (CTA+) and surface modification of KH550. High-temperature activation was the most critical step for the modified sericite mica, and the number of hydroxyl groups of mica under high temperature directly affected the surface modification of KH550. The effects of various activation temperatures on the surface modification of sericite mica were investigated. The structure of activated sericite mica was intact when activation temperature was 600°C or 700°C, and the surface modification of sericite mica was not affected. The structure of activated sericite mica was partially destroyed at 800°C. The optimal temperature for activating sericite mica was 700°C. The structure and morphology of modified sericite mica were characterized by Fourier-transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, Brunauer–Emmett–Teller (BET) analysis and loose bulk volume. The KH550 could not only chemically graft onto the surface of sericite mica, but also enter into the interlayer through electrostatic attraction after its end amino group was protonated. The interlayer spacing of modified sericite mica increased to 3.22 nm, indicating that it might be an excellent layered silicate for preparing clay–polymer nanocomposites.

Keywords

activation temperatureinterlayer spacingquaternary ammonium saltsericite micasilane coupling agentsurface modification
Type
Article
Information
Clay Minerals , Volume 56 , Issue 2 , June 2021 , pp. 87 - 98
Copyright
Copyright © The Author(s), 2021. Published by Cambridge University Press on behalf of The Mineralogical Society of Great Britain and Ireland

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Associate Editor: Margarita Darder

References

Arias, J.J.R., Rosa, J. & Marques, M.F.V. (2019) Influence of phyllosilicate structure on performance of polypropylene nanocomposites prepared via in-situ polymerization. Journal of Nanoscience and Nanotechnology, 19, 1908–1922.CrossRefGoogle ScholarPubMed
Bose, S. & Mahanwar, P.A. (2010) Effects of titanate coupling agent on the properties of mica-reinforced nylon-6 composites. Polymer Engineering & Science, 45, 1479–1486.CrossRefGoogle Scholar
Bose, S., Raghu, H. & Mahanwar, P.A. (2006) Mica reinforced nylon-6: effect of coupling agents on mechanical, thermal, and dielectric properties. Journal of Applied Polymer Science, 100, 4074–4081.CrossRefGoogle Scholar
Chang, J.H., Mun, M.K. & Kim, J.C. (2007) Synthesis and characterization of poly(butylene terephthalate)/mica nanocomposite fibers via in situ interlayer polymerization. Journal of Applied Polymer Science, 106, 1248–1255.CrossRefGoogle Scholar
Ding, H., Wang, Y.B., Liang, Y. & Qin, F.X. (2014) Preparation and characterization of cetyl trimethylammonium intercalated sericite. Advances in Materials Science and Engineering, 2014, 1–8.Google Scholar
El-Toni, A.M., Yin, S. & Sato, T. (2006) Synthesis and silica coating of calciadoped ceria/mica nanocomposite by seeded polymerization technique. Applied Surface Science, 252, 5063–5070.CrossRefGoogle Scholar
Fu, Y.J., Wang, Y.X., Wang, S., Gao, Z.D.F. & Xiong, C. X. (2019) Enhanced breakdown strength and energy storage of PVDF-based dielectric composites by incorporating exfoliated mica nanosheets. Polymer Composites, 40, 2088–2094.CrossRefGoogle Scholar
Gan, D., Lu, S., Song, C. & Wang, Z. (2001) Mechanical properties and frictional behavior of a mica-filled poly(aryl ether ketone) composite. European Polymer Journal, 37, 1359–1365.Google Scholar
Gao, H.M., Yuan, J.Z., Wang, X.R., Guan, J.F., Zhang, L.Y., Jing, Z.Q. & Mao, Y.L. (2007) Mechanism of surface modification for sericite. Journal of Wuhan University of Technology, 22, 470–472.CrossRefGoogle Scholar
Heller-Kallai, L. (2006) Thermally modified clay minerals. Developments in Clay Science, 1, 289–308.CrossRefGoogle Scholar
Hokkaido, J.M. (1994) Surface Modification Power Technology Handbook. Butterworth, London, UK, pp. 453–457.Google Scholar
Ismail, H., Hamid, Z.A.A. & Ishak, S. (2012) Effect of silane coupling agent on the curing, tensile, thermal, and swelling properties of EPDM/mica composites. Advanced Materials Research, 626, 641–651.CrossRefGoogle Scholar
Ismail, H., Ishak, S. & Hamid, Z.A.A. (2014) Effect of silane coupling agent on the curing, tensile, thermal, and swelling properties of ethylene–propylene–diene monomer rubber (EPDM)/mica composites. Journal of Vinyl and Additive Technology, 20, 116–121.CrossRefGoogle Scholar
Jia, Z.M., Chen, S.J. & Zhang, J. (2013) Preparation and properties of polydimethylsiloxane–mica composites. Journal of Applied Polymer Science, 127, 3017–3025.CrossRefGoogle Scholar
Lai, D.W., Li, D.X., Yang, J. & Yang, L. (2014) Preparation and characterization of quaternary ammonium complex silane coupling agent modified montmorillonite. Bulletin of the Chinese Ceramic Society, 33, 1298–1302.Google Scholar
Lalhmunsiama, , Tiwari, D. & Lee, S.M. (2015) Physico-chemical studies in the removal of Sr(II) from aqueous solutions using activated sericite. Journal of Environmental Radioactivity, 147, 76–84.CrossRefGoogle ScholarPubMed
Li, S.Y., Chen, Q., Wu, S.H. & Shen, J. (2011) Studies of modification of HDPE and interfacial interaction of its composites with sericite. Polymers for Advanced Technologies, 22, 2517–2522.CrossRefGoogle Scholar
Liang, Y., Ding, H., Wang, Y.B., Liang, N. & Wang, G.L. (2013) Intercalation of cetyl trimethylammonium ion into sericite in the solvent of dimethyl sulfoxide. Applied Clay Science, 74, 109–114.CrossRefGoogle Scholar
Nie, Y.M., Wei, S.B., Lu, X.L. & Liu, S.X. (2013) Research of sericite in mineral technology. Advanced Materials Research, 721, 350–353.CrossRefGoogle Scholar
Pawar, R.R., Kevadiya, B.D., Brahmbhatt, H. & Bajaj, H.C. (2013) Template free synthesis of mesoporous hectorites: efficient host for pH responsive drug delivery. International Journal of Pharmaceutics, 446, 145–152.Google ScholarPubMed
Ren, M., Yin, H.B., Wang, A.L., Jiang, T.S. & Wada, Y.J. (2007) Mica coated by direct deposition of rutile TiO2 nanoparticles and the optical properties. Materials Chemistry and Physics, 103, 230–234.CrossRefGoogle Scholar
Samakande, A., Hartmann, P.C., Cloete, V. & Sanderson, R.D. (2007) Use of acrylic based surfmers for the preparation of exfoliated polystyrene–clay nanocomposites. Polymer, 48, 1490–1499.CrossRefGoogle Scholar
Shih, Y.J. & Shen, Y.H. (2009) Swelling of sericite by LiNO3-hydrothermal treatment. Applied Clay Science, 43, 282–288.CrossRefGoogle Scholar
Siregar, S.H., Wijaya, K., Kunarti, E.S., Syoufian, A. & Suyanta, S. (2018) Preparation and characterization of montmorillonite–cetyl trimethylammonium bromide. Asian Journal of Chemistry, 30, 25–28.CrossRefGoogle Scholar
Skale, S., Doleček, V. & Slemnik, M. (2008) Electrochemical impedance studies of corrosion protected surfaces covered by epoxy polyamide coating systems. Progress in Organic Coatings, 62, 387–392.CrossRefGoogle Scholar
Tamura, K., Yokoyama, S., Pascua, C.S. & Yamada, H. (2008) New age of polymer nanocomposites containing dispersed high-aspect-ratio silicate nanolayers. Chemistry of Materials, 20, 2242–2246.CrossRefGoogle Scholar
Theng, B.K.G. (2012) Polymer–clay nanocomposites. Developments in Clay Science, 4, 201–241.Google Scholar
Uno, H., Tamura, K., Yamada, H., Umeyama, K., Hatta, T. & Moriyoshi, Y. (2009) Preparation and mechanical properties of exfoliated mica–polyamide 6 nanocomposites using sericite mica. Applied Clay Science, 46, 81–87.CrossRefGoogle Scholar
Xiao, C.G., Li, D.X., Zeng, D., Lang, F., Xiang, Y. & Lin, Y. (2021) A comparative investigation on different silane coupling agents modified sericite mica/polyimide composites prepared by in situ polymerization. Polymer Bulletin, 78, 863–883.CrossRefGoogle Scholar
Yang, R., Yu, J., Liu, Y. & Wang, K.H. (2008) Effects of coupling agents on the natural aging behavior and oxidation profile of high-density polyethylene/sericite composites. Journal of Applied Polymer Science, 107, 610–617.CrossRefGoogle Scholar
Yang, Y., Zhu, Z.K., Yin, J., Wang, X.Y. & Qi, Z.E. (1999) Preparation and properties of hybrids of organo-soluble polyimide and montmorillonite with various chemical surface modification methods. Polymer, 40, 4407–4414.CrossRefGoogle Scholar
Yu, X.F. (2007) The preparation and characterization of cetyltrimethylammonium intercalated muscovite. Microporous and Mesoporous Materials, 98, 70–79.CrossRefGoogle Scholar
Yu, X.F., Zhao, L.Y., Gao, X.X, Zhang, X.P. & Wu, N.Z. (2006) The intercalation of cetyltrimethylammonium cations into muscovite by a two-step process: I. The ion exchange of the interlayer cations in muscovite with Li+. Journal of Solid State Chemistry, 179, 1569–1574.CrossRefGoogle Scholar
Yun, Y.H., Han, S.P., Lee, S.H. & Choi, S.C. (2002) Surface modification of sericite using TiO2 powders prepared by alkoxide hydrolysis: whiteness and SPF indices of TiO2-adsorbed sericite. Journal of Materials Synthesis & Processing, 10, 359–365.CrossRefGoogle Scholar
Zawrah, M.F., Khattab, R.M., Saad, E.M., Gado, R.A. (2014) Effect of surfactant types and their concentration on the structural characteristics of nanoclay. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 122, 616–623.CrossRefGoogle ScholarPubMed
Zhang, Q., Li, D.X., Lai, D.W. & Ou, B.L. (2015) Hexadecyltrimethylammonium bromide-modified sericite mica-based polyimide composites: a comparison between in situ polymerization and solution intercalation Processes. Macromolecular Research, 23, 802–808.CrossRefGoogle Scholar
Zhang, Q., Li, D.X., Lai, D.W., You, Y.L. & Ou, B.L. (2016) Preparation, microstructure, mechanical, and thermal properties of in situ polymerized polyimide/organically modified sericite mica composites. Polymer Composites, 37, 2243–2251.CrossRefGoogle Scholar
Zhang, Y.H., Fu, S.Y., Li, R.K.Y., Wu, J.T., Li, L.F., Ji, J.H. & Yang, S.Y. (2005) Investigation of polyimide–mica hybrid films for cryogenic applications. Composites Science and Technology, 65, 1743–1748.CrossRefGoogle Scholar
Zhao, W., Xu, Y., Song, C.R., Chen, J. & Liu, X.H. (2019) Polyimide/mica hybrid films with low coefficient of thermal expansion and low dielectric constant. e-Polymers, 19, 181–189.Google Scholar