Hostname: page-component-cd9895bd7-gvvz8 Total loading time: 0 Render date: 2024-12-23T16:38:12.206Z Has data issue: false hasContentIssue false
  • English
  • Français

New nanofluids, based on clay minerals, as promising heat carriers for energetics

Published online by Cambridge University Press:  02 July 2018

Vasily Moraru
Vasily Moraru*
Affiliation:
Department of Gas-Thermal Process and Nanotechnology, Gas Institute of National Academy of Science of Ukraine, 39, Degtyarivska Str., 03113 Kiev, Ukraine
*
*E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

In an automated installation powered by direct current (DC), the boiling curves and heat-transfer-coefficient (HTC) dependencies on the superheat values (ΔT) under free convection conditions for the water nanodispersions of clay minerals – illite, montmorillonite, palygorskite and genetic mixtures of the latter two – were obtained. The effects of some factors on pool boiling heat transfer were also studied.

A significant influence of the shape and anisotropy of nanoparticles (NPs) on the heat-transfer parameters of nanofluids (NFs) was detected. A significant critical heat flux (CHF) enhancement (up to 200–300%) at boiling of the nanofluids studied was established, which is due to nanoparticle deposition on the heater surface during nanofluid boiling. The structure of the nanomaterials deposited is important in the enhancement of heat transfer at boiling of nanofluids and in avoiding boiling crises.

The present study showed the effectiveness of clay-mineral nanofluids for extra emergency cooling of overheated surfaces of powerful equipment in the event of the sudden onset of a boiling crisis.

Keywords

Nanofluidsclay mineralspool boilingheat transfercoolants
Type
Article
Information
Clay Minerals , Volume 53 , Issue 2 , June 2018 , pp. 255 - 269
Copyright
Copyright © Mineralogical Society of Great Britain and Ireland 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

This paper was originally presented during the session: ‘NT-10 Recent advances in applications of Industrial Clays’ held at ICC 2017.

Editor: George Christidis

References

REFERENCES

Assael, M.J., Chen, C.F., Metaxa, I. & Wakeham, W.A. (2004) Thermal conductivity of suspensions of carbon nanotubes in water. International Journal of Thermophysics , 25, 971–985.Google Scholar
Bang, I.C. & Chang, S.H. (2005) Boiling heat transfer performance and phenomena of Al2O3-water nanofluids from a plain surface in a pool. International Journal of Heat and Mass Transfer, 48, 2407–2419.Google Scholar
Bhogare Rahul, A. & Kothawale, B.S. (2013) A review on applications and challenges of nano-fluids as coolant in automobile radiator. International Journal of Scientific and Research Publications, 3(8), 1–11.Google Scholar
Bhogare, R.A. & Kothawale, B.S. (2014) Performance investigation of automobile radiator operated with Al2O3 based nanofluid. IOSR Journal of Mechanical and Civil Engineering, 11(3), 23–30.Google Scholar
Bondarenko, B.I., Moraru, V.N., Sydorenko, S.V., Komysh, D.V. & Khovavko, A.I. (2012) Nanofluids for power engineering: Effect of stabilization on the critical heat flux at boiling. Technical Physics Letters, 38(9), 853–857.Google Scholar
Bondarenko, B.I., Moraru, V.N., Ilyenko, B.K., Khovavko, A.I., Komysh, D.V., Panov, E.M., Sydorenko, S.V. & Snigur, O.V. (2013) Study of a heat transfer mechanism and critical heat flux at nanofluids boiling. International Journal of Energy for a Clean Environment, 14(2–3), 151–168.Google Scholar
Bondarenko, B.I., Moraru, V.N., Sydorenko, S.V. & Komysh, D.V. (2015) Nanofluids for energetics: Role of some colloid-chemical factors in pool boiling heat transfer. Abstract reference number: COLL2015_0386 in: The 5th International Conference for Colloid and Interface 21–24 June 2015, Amsterdam, The Netherlands.Google Scholar
Bondarenko, B.I., Moraru, V.N., Sydorenko, S.V. & Komysh, D.V. (2016a) Nanofluids for power engineering: Emergency cooling of overheated heat transfer surfaces. Technical Physics Letters, 42(7), 675–679.Google Scholar
Bondarenko, B.I., Moraru, V.N., Sydorenko, S.V., Komysh, D.V. & Khovavko, A.I. (2016b) Nanostructured architectures on the heater surface at nanofluids boiling and their role in the intensification of heat transfer. Nanoscience and Nanoengineering, 4(1), 12–22.Google Scholar
Chandrasekar, M. & Suresh, S. (2009) A review on the mechanisms of heat transfer in nanofluids. Heat Transfer Engineering, 30(14), 1136–1150.Google Scholar
Choi, S.U.S. (1995) Enhancing thermal conductivity of fluids with nanoparticles. Pp. 99–105 in: Developments and applications of non-Newtonian Flows (Signer, D.A. & Wang, H.P., editors). FED-vol. 231/MD-vol. 66, ASME, New York.Google Scholar
Choi, S.U.S. (2008) Nanofluids: A new field of scientific research and innovative applications. Heat Transfer Engineering, 29(5), 429–431.Google Scholar
Choi, S.U.S. (2009) Nanofluids: from vision to reality through research. Journal of Heat Transfer, 131, 033106.Google Scholar
Chougule, S.S. & Sahu, S.K. (2014) Thermal performance of automobile radiator using carbon nanotube-water nanofluid experimental study. Journal of Thermal Science and Engineering Applications, 6, 041009.Google Scholar
Das, S.K., Choi, S.U.S. & Patel, H. (2006) Heat transfer in nanofluids – A Review. Heat Transfer Engineering, 27(10), 3–19.Google Scholar
Das, S.K., Putra, N. & Roetzel, W. (2003) Pool boiling characteristics of nano-fluids. International Journal of Heat and Mass Transfer, 46, 851–862.Google Scholar
Das, S.K., Choi, S.U.S., Yu, W. & Pradeep, T. (2007) Nanofluids: Science and Technology. Wiley-Interscience, New Jersey, pp. 1–397.Google Scholar
De Risi, A., Milanese, M., Colangelo, G. & Laforgia, D. (2014) High efficiency nanofluid cooling system for wind turbines. Thermal Science, 18(2), 543–554.Google Scholar
Deryaguin, B.V., Churaev, N.V. & Muller, V. (1985) Surface Forces. Nauka, Moscow, 399 pp. [in Russian].Google Scholar
Ding, Y.L., Chen, H., Wang, L., Yang, C.-Y., He, Y., Yang, W., Lee, W.P., Zhang, L. & Huo, R. (2007) Heat transfer intensification using nanofluids. Powder and Particle, 25, 23–36.Google Scholar
Eastman, J.A., Choi, S.U.S., Li, S., Yu, W. & Thompson, L.J. (2001) Anomalously increased effective thermal conductivities of ethylene glycol-based nanofluids containing copper nanoparticles. Applied Physics Letters, 78, 718–720.Google Scholar
Eastman, J.A., Phillpot, S.R., Choi, S.U.S. & Keblinski, P. (2004) Thermal transport in nanofluids. Annual Review of Materials Research, 34, 219–246.Google Scholar
Fokin, B.S., Belen'kii, M.Ya., Al'myashev, V.I., Khabenskii, V.B., Al'myasheva, O.V. & Gusarov, V.V. (2009) Critical heat flux during boiling of the aqueous dispersion of nanoparticles. Technical Physics Letters, 35(10), 440–445.Google Scholar
Grim, R.E. (1959) Clay Mineralogy. Pp. 137–159. Foreign Literature Publishing House, Moscow. 452 pp. [in Russian].Google Scholar
Hillebrand, W.F., Lundell, G.E., Bright, H.A. & Hoffman, J.I. (1966) A Practical Guide to Inorganic Analysis. Khimiya, Moscow, 1112 pp. [in Russian].Google Scholar
Jo, B., Jeon, P.S., Yoo, J. & Kim, H.J. (2009) Wide range parametric study for the pool boiling of nano-fluids with a circular plate heater. Journal of Visualization, 12, 37–46.Google Scholar
Keblinski, P., Phillpot, S.R., Choi, S.U.S. & Eastman, J.A. (2002) Mechanisms of heat flow in suspensions of nano-sized particles (nanofluids). International Journal of Heat and Mass Transfer, 45, 855–863.Google Scholar
Kim, H.D. (2011) Enhancement of critical heat flux in nucleate boiling of nanofluids: a state-of-art review. Nanoscale Research Letters, 6, 415–433.Google Scholar
Kim, S.J., Bang, I.C., Buongiorno, J. & Hu, L.W. (2006) Effects of nanoparticle deposition on surface wettability influencing boiling heat transfer in nanofluids. Applied Physics Letters, 89, 153107.Google Scholar
Kim, H.D., Kim, J. & Kim, M.H. (2007a) Experimental studies on CHF characteristics of nanofluids at pool boiling. International Journal of Multiphase Flow, 33(7), 691–697.Google Scholar
Kim, H.D. & Kim, Moo Hwan (2007b) Effect of nanoparticle deposition on capillary wicking that influences the critical heat flux in nanofluids. Applied Physics Letters, 91, 014104.Google Scholar
Kim, H., Kim, E. & Kim, M.H. (2014) Effect of nanoparticle deposit layer properties on pool boiling critical heat flux of water from a thin wire. International Journal of Heat and Mass Transfer, 69, 164–168.Google Scholar
Kim, S.J., Bang, I.C., Buongiorno, J. & Hu, L.W. (2007a) Study of pool boiling and critical heat flux enhancement in nanofluids. Bulletin Polish Academy Science, Technical Sciences, 55, 211–216.Google Scholar
Kim, S.J., Bang, I.C., Buongiorno, J. & Hu, L.W. (2007b) Surface wettability change during pool boiling of nanofluids and its effect on critical heat flux. International Journal of Heat and Mass Transfer, 50, 4105–4116.Google Scholar
Kruit, H.R. (1955) Colloid Science vol. 1. Foreign Literature Publishers, Moscow, 538 pp. [in Russian].Google Scholar
Kutateladze, S.S. (1979) Fundamentals of Heat Exchange Theory. 5th edition. Atomizdat, Moscow, 416 pp. [in Russian].Google Scholar
Milanova, D. & Kumar, R. (2005) Role of ions in pool boiling heat transfer of pure and silica nanofluids. Applied Physics Letters, 87, 233107.Google Scholar
Moraru, V.N., Ovcharenko, F.D. & Moraru, D.V. (1999) Boundary layer and the stability of hydrophilic dispersions. Сolloids and Surfaces. A: Physicochemical and Engineering Aspects, A149 (1), 171–178.Google Scholar
Nan, C.-W., Birringer, R., Clarke, D.R. & Gleiter, H. (1997) Effective thermal conductivity of particulate composites with interfacial thermal resistance. Journal of Applied Physics, 81, 6692–6699.Google Scholar
Ovcharenko, F.D., Kirichenko, N.G., Ostrovskaya, A.B. & Dovgy, M.G. (1966) Cherkassky Deposit of Bentonite and Palygorskite Clays. Naukova Dumka, Kiev, Ukraine, 126 pp. [in Russian].Google Scholar
Pham, Q.T., Kim, T.I., Lee, S.S. & Chang, S.H. (2012) Enhancement of critical heat flux using nano-fluids for in vessel retention-external vessel cooling. Applied Thermal Engineering, 35, 157–165.Google Scholar
Rumyantsev, V.D. (2006) Theory of Heat and Mass Transfer: A Textbook for High Schools. ‘Porogi’ Publishing House, Dnepropetrovsk, Ukraine, 532 pp. [in Russian], pp. 179–235.Google Scholar
Tarasevich, Yu. I. (1988) The Structure and Surface Chemistry of Layered Silicates. Naukova Dumka, Kiev, pp. 5–35.Google Scholar
Terekhov, V.I., Kalinina, S.V. & Lemanov, V.V. (2010) The mechanism of heat transfer in nanofluids: state of the art (review). Part 1. Synthesis and properties of nanofluids. Thermophysics and Aeromechanics, 17(1), 1–15.Google Scholar
Vassallo, P. (2004) Pool boiling heat transfer experiments in silica-water nanofluids. International Journal of Heat and Mass Transfer, 47, 407–411.Google Scholar
Wang, L. & Wei, X. (2009) Nanofluids: synthesis, heat conduction, and extension. Journal of Heat Transfer, 131, 033102.Google Scholar
Wang, X.-Q. & Mujumdar, A.S. (2007) Heat transfer characteristics of nanofluids: a review. International Journal of Thermal Sciences, 46, 1–19.Google Scholar
Wen, D. (2008a) Mechanisms of thermal nanofluids on enhanced critical heat flux (CHF). International Journal of Heat and Mass Transfer, 51, 4958–4965.Google Scholar
Wen, D. (2008b) On the role of structural disjoining pressure to boiling heat transfer of thermal nanofluids. Journal of Nanoparticle Research, 10, 1129–1140.Google Scholar
Wen, D.S. & Ding, Y.L. (2005) Experimental investigation into the pool boiling heat transfer of aqueous based γ-alumina nanofluids. Journal of Nanoparticle Research, 7, 265–274.Google Scholar
Wen, D.S., Ding, Y.L. & Williams, R.A. (2006) Pool boiling heat transfer of aqueous based TiO2 nanofluids. Journal of Enhanced Heat Transfer, 13, 231–244.Google Scholar
Yagov, V.V. (2003) The mechanism of the pool boiling crisis. Thermal Engineering, 50 (3), 175–183.Google Scholar
You, S.M., Kim, J.H., Kim, K.H. (2003) Effect of nanoparticles on critical heat flux of water in pool boiling heat transfer. Applied Physics Letters, 83, 3374–3376.Google Scholar
Yu, W. & Choi, S.U.S. (2003) The role of interfacial layers in the enhanced thermal conductivity of nanofluids: a renovated Maxwell model. Journal of Nanoparticle Research, 5, 167–171.Google Scholar
Yu, W., France, D.M., Choi, S.U.S. & Routbort, J.L. (2007) Review and assessment of nanofluid technology for transportation and other application. Argonne National Laboratory, ANL/ESD/07–9. 78 р.Google Scholar
Yu, W., France, D.M., Routbort, J.L. & Choi, S.U.S. (2008) Review and comparison of nanofluid thermal conductivity and heat transfer enhancements. Heat Transfer Engineering, 29(5), 432–460.Google Scholar
Supplementary material: File

Moraru supplementary material

Tables

Download Moraru supplementary material(File)
File 53.8 KB