Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-29T15:23:20.310Z Has data issue: false hasContentIssue false
  • English
  • Français

Adsorption of ferrocyanide onto raw and acid-activated clinoptilolite and sepiolite: equilibrium modelling by error minimization

Published online by Cambridge University Press:  09 July 2018

V. Önen  and
E. Yel
V. Önen*
Affiliation:
Selcuk University, Faculty of Engineering, Department of Mining Engineering, 42075 Campus/Konya, Turkey
E. Yel
Affiliation:
Selcuk University, Faculty of Engineering, Department of Environmental Engineering, 42075 Campus/Konya, Turkey
*
*E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

The experimental data on adsorption of Fe and CN of a ferrocyanide complex onto raw and acid-activated clinoptilolite/sepiolite on the basis of detention time and particle size was modelled by a linear and a non-linear approach. The linearized best-fit isotherm selection method and non-linear error minimization was applied through Freundlich, Langmuir and Temkin isotherms. ERRSQ, MPSD, HYBRID and ARE error functions were minimized by a developed MATLAB script to determine the isotherm parameters in non-linear optimization. The complex was not adsorbed as whole anions but the Fe and CN were adsorbed separately. 0.65 mg Fe/L. min and 4.84 mg CN/L. min initial adsorption rates were achieved with acid activated clinoptilolite. The Fe adsorption was not as successful as CN. The adsorption of Fe and CN was described by Freundlich and Langmuir isotherms respectively. The differences between the predicted isotherm parameter sets of linear models and minimized error function models indicated that both the best-fit isotherm selection and the isotherm constant determinations can be performed properly by error minimization as well as by conventional linear best fit modelling approach.

Keywords

acid activationadsorptionerror minimizationlinear modellingsepioliteclinoptilolite
Type
Research Article
Information
Clay Minerals , Volume 48 , Issue 4 , September 2013 , pp. 613 - 626
Copyright
Copyright © The Mineralogical Society of Great Britain and Ireland 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Adams, M. D. (1994) Removal of cyanide from solution using activated carbon. Minerals Engineering, 7, 1164–1177.Google Scholar
Alkan, M., Demirbaş, Ö. & Doğan, M. (2007) Adsorption kinetics and thermodynamics of an anionic dye onto Sepiolite. Microporous and Mesopororous Materials, 101, 388–396.Google Scholar
Allen, S.J., Mckay, G. & Porter, J.F. (2004) Adsorption isotherm models for basic dye adsorption by peat in single and binary component systems. Journal of Colloid Interface Science, 280, 322–333.CrossRefGoogle ScholarPubMed
Alley, E. R. (2000) Water Quality Control Handbook. Mcgraw-Hill Inc., USA.Google Scholar
APHA (1998) Standard Methods for the Examination of Water and Wastewater, 20th edition, New York, USA.Google Scholar
Balcı, S. (1999) Effect of heating and acid pre-treatment on pore size distribution of sepiolite. Clay Minerals, 34, 647–655.Google Scholar
Behnamfard, A. & Salarirad, M. M. (2009) Equilibrium and kinetic studies on free cyanide adsorption from aqueous solution by activated carbon. Journal of Hazardous Materials, 170, 127–133.Google Scholar
Brigatti, M. F., Franchini, G., Frigieri, P., Gardinali, C., Medici, L. & Poppi, L. (1999) Treatment of industrial wastewater using Zeolite and Sepiolite, natural microporous materials. The Canadian Journal of Chemical Engineering, 77, 163–168.Google Scholar
Brigatti, M.F., Lugli, C. & Poppi, L. (2000) Kinetics of heavy metal removal and recovery in Sepiolite. Applied Clay Science, 16, 45–57. \Google Scholar
Çelik, H., İpekoğlu, Ü. & Mordoğan, H. (1998) Behavior of some heavy metals in Alkaline-cyanide solutions. Mining Journal, 37, 35–46.(In Turkish).Google Scholar
Chatelet, L., Bottero, J.Y., Yvon, J. & Bouchelaghem, A. (1996) Competition between monovalent and divalent anions for calcined and uncalcined hydrotalcite: anion exchange and adsorption sites. Colloids and Surfaces A, 111, 167–175.Google Scholar
Christidis, G.E., Scott, P. W. & Dunham, A. C. (1997) Acid activation and bleaching capacity of bentonites from the islands of Milos and Chios, Aegean, Greece. Applied Clay Science, 12, 329–347.Google Scholar
Christidis, G.E., Moraetis, D., Keyehan, E., Akhalbedashvili, L., Kekelidze, N., Gevorkyan, R., Yeritsyan, H. & Sargsyan, H. (2003) Chemical and thermal modificiation of natural HEU-type zeolitic materials from Armenia, Georgia and Greece. Applied Clay Science, 24, 79–91.Google Scholar
Da Fonseca, M.G., De Oliveira, M. M. & Arakaki, L.N.H. (2006) Removal of cadmium, zinc, manganase and chromium cations from aqueous solution by a clay mineral. Journal of Hazardous Materials, B137, 288–292.CrossRefGoogle Scholar
Dai, X.I., Jeffrey, M. I. & Breuer, P. L. (2010) A mechanistic model of the equilibrium adsorption of copper cyanide species onto activated carbon. Hydrometallurgy, 101, 99–107.CrossRefGoogle Scholar
Dekany, I., Turi, L., Fonseca, A. & Nagy, J. B. (1999) The structure of acid treated sepiolite: small-angle X-ray scattering and multiMAS-NMR investigations. Applied Clay Science, 14, 141–160.Google Scholar
Deveci, H., Yazıcı, E.Y., Alp, I. & Uslu, T. (2006) Removal of cyanide from aqueous solutions by plain and metal-impregnated granular activated carbons. International Journal of Mineral Processing, 79, 198–208.Google Scholar
Donato, D.B., Nichols, O., Possingham, H., Moore, M., Ricci, P. F. & Noller, B. N. (2007) A critical review of the effects of gold cyanide-bearing tailings solutions on wildlife. Environment International, 33, 974–984.CrossRefGoogle ScholarPubMed
Fuller, W. H. (1985) Cyanides in the environment with particular attention to the soil. Pp. 19–44 in: Cyanide and the Environment (van Zyl, D., editor). Colorado State University, Fort Collins, Colorado, USA.Google Scholar
Gil, A., Assis, F.C.C., Albeniz, S. & Korili, S. A. (2011) Removal of dyes from wastewaters by adsorption on pillared clays. Chemical Engineering Journal, 168, 1032–1040.Google Scholar
Gimbert, F., Morin-Crini, N., Renault, F., Badot, P. M. & Crini, G. (2008) Adsorption isotherm models for dye removal by cationized starch-based material in a single component system: Error analysis. Journal of Hazardous Materials, 157, 34–46.Google Scholar
Gonzáles-Pradas, E., Socías-Viciana, M., Ureña-Amate, M.D., Cantos-Molina, A. & Villafranca-Sánchez, M. (2005) Adsorption of chloridazon from aqueous solution on heat and acid treated sepiolites. Water Research, 39, 1849–1857.Google Scholar
Gurbuz, F., Ciftci, H. & Akcil, A.. (2009) Biodegradation of cyanide containing effluents by Scenedesmus obliquus. Journal of Hazardous Materials, 162, 74–79.Google Scholar
Hadi, M., Samarghandi, M. R. & McKay, G. (2010) Equilibrium two-parameter isotherms of acid dyes sorption by activated carbons: study of residual errors. Chemical Engineering Journal, 160, 408–416.Google Scholar
Hameed, B.H & Rahman, A. A. (2008) Removal of phenol from aqueous solutions by adsorption onto activated carbon prepared from biomass material. Journal of Hazardous Materials, 160, 576–581.Google Scholar
Hernandez, L.G., Rueda, L.I., Diaz, A. R. & Anton, C. H. (1986) Preparation of amorphous silica by acid dissolution of sepiolite: kinetics and thermal study. Journal of Colloid and Interface Science, 109, 150–160.Google Scholar
Hingston, F. J. (1981) A review of anion sorption. Pp. 51–90 in: Inorganics at Solid–Liquid Interfaces (Anderson, M.A. and Rubin, A. J., editors). Ann Arbor Science, Ann Arbor, Michigan, USA.Google Scholar
Ho, Y. S. (2004) Selection of optimum isotherm. Carbon, 10, 2115–2116.Google Scholar
Ho, Y.S., Porter, J. F. & McKay, G. (2002) Equilibrium isotherm studies for the sorption of divalent metal ions onto peat: copper, nickel and lead single component systems. Water, Air, and Soil Pollution, 14, 1–31.Google Scholar
Inglezakis, V.J., Zorpas, A.A., Loizidou, M. D. & Grigoropoulou, H. P. (2003) Simultaneous removal of metals Cu2+, Fe3+ and Cr3+ with anions SO4 2– HPO4 2– using clinoptilolite. Microporous and Mesoporous Materials, 61, 167–171.CrossRefGoogle Scholar
Jordan, J. & Ewing, G. J. (1962) The protonation of hexacyanoferrates. Inorganic Chemistry, 1, 587–591.Google Scholar
Kumar, K. V. (2006) Comparative analysis of linear and non-linear method of estimating the sorption isotherm parameters for malachite green onto activated carbon. Journal of Hazardous Materials, 136, 197–202.Google ScholarPubMed
Kumar, K.V., Porkodi, K. & Rocha, F. (2008a) Comparison of various error functions in predicting the optimum isotherm by linear and non-linear regression analysis for the sorption of basic red 9 by activated carbon. Journal of Hazardous Materials, 150, 158–165.Google Scholar
Kumar, K.V., Porkodi, K. & Rocha, F. (2008b) Isotherms and thermodynamics by linear and non-linear regression analysis for the sorption of methylene blue onto activated carbon: comparison of various error functions. Journal of Hazardous Materials, 151, 794–804.Google Scholar
Lazarević, S., Janković-Častvan, I., Jovanović, D., Milonjić, S., Janaćković, D. & Petrović, R. (2007). Adsorption of Pb2+, Cd2+ and Sr2+ ions onto Natural and Acid-activated Sepiolites. Applied Clay Science, 37, 47–57.Google Scholar
Lazaridis, N.K., Matis, K. A. & Webb, M. (2001) Flotation of metal-loaded clay anion exchangers. Part I: the case of chromates. Chemosphere, 42, 373–378.Google Scholar
Lazaridis, N.K., Hourzemanoglou, A. & Matis, K. A. (2002) Flotation of metal-loaded clay anion exchangers. Part II: the case of arsenates. Chemosphere, 47, 319–324.Google Scholar
Maqueda, C., dos Santos Afonso, M., Morillo, E., Torres Sánchez, R.M., Perez-Sayago, M. & Undabeytia, T. (2013) Adsorption of diuron on mechanically and thermally treated montmorillonite and sepiolite. Applied Clay Science, 72, 175–183.Google Scholar
Malamis, S. & Katsou, E. (2013) A review on zinc and nickel adsorption on natural and modified zeolite, bentonite and vermiculite: Examination of process parameters, kinetics and isotherms. Journal of Hazardous Materials, 252-253, 428–461.Google ScholarPubMed
Motsi, T., Rowson, N. A. & Simmons, M.J.H. (2009) Adsorption of heavy metals from acid mine drainage by natural zeolite. International Journal of Mineral Processing, 92, 42–48.Google Scholar
Moussavi, G. & Khosravi, R. (2010) Removal of cyanide from wastewater by adsorption onto pistachio hull wastes: Parametric experiments, kinetics and equilibrium analysis. Journal of Hazardous Materials, 183, 724–730.Google Scholar
Myriam, M., Suarez, M. & Martin-Poaz, J. M. (1998) Structural and textural modifications of palygorskite and sepiolite under acid treatment. Clays and Clay Minerals, 46, 225–231.Google Scholar
Ou, B. & Zaidi, A. (1995) Cyanide – dispelling the myths; natural degradation. Mining Environmental Management, June 1995, 5–7.Google Scholar
Özdemir, O., Çınar, M., Sabah, E., Arslan, F. & Çelik, M. S. (2007) Adsorption of anionic surfactants onto sepiolite. Journal of Hazardous Materials, 147, 625–632.CrossRefGoogle ScholarPubMed
Rengeraj, S., Yeon, J.W., Kim, Y., Jung, Y., Ha, Y. K. & Kim, W. H. (2007) Adsorption characteristics of Cu(II) onto ion exchange resins 252H and 1500H: Kinetics, isotherms and error analysis. Journal of Hazardous Materials, 143, 469–477.Google Scholar
Rennert, T. & Mansfeldt, T. (2002) Sorption of ironcyanide complexes in soils. Soil Science Society of America Journal, 66, 437–444.Google Scholar
Rhodes, C. N. & Brown, D. R. (1992) Structural characterization and optimization of acid-treated montmorillonite and high porosity silica supports for ZnCl2 alkylation catalysts. Journal of the Chemical Society, Faraday Transactions, 88, 2269–2274.Google Scholar
Robbins, G. & Devuyst, E. (1995) Cyanide – dispelling the myths: Inco's SO2/Air Process. Mining Environmental Management, June 1995, 8–9.Google Scholar
Sato, T., Wakabayashi, T. & Shimada, M. (1986) Sorption of various anions by magnesium aluminium oxide. Industrial and Engineering Chemistry, Product Research and Development, 25, 89–92.Google Scholar
Schenk, B. & Wilke, B. M. (1984) Cyanidadsorption an Sesquioxiden, Tonmineralen und Huminstoffen. Zeitschrift für Pflanzenernährung und Bodenkunde, 147, 669–679.(in German, with English abstract).Google Scholar
Sharpe, A. G. (1976) Chemistry of Cyano Complexes of the Transition Metals. Academic Press, London.Google Scholar
Šljivić, M., Smičiklas, I., Pejanović, S. & PlećaŠ, I. (2009) Comparative study of Cu2+ adsorption on a zeolite, a clay and a diatomite from Serbia. Applied Clay Science, 43, 33–40.CrossRefGoogle Scholar
Steudel, A., Batenburg, L.F., Fischer, H.R., Weidler, P. G. & Emmerich, K. (2009) Alteration of non-swelling clay minerals and magadiite by acid activation. Applied Clay Science, 44, 95–104.Google Scholar
Vasylechko, V.O., Gryshchouk, G.V., Kuzma, Y.B., Zakordonskiy, V.P., Vasylechko, L.O., Lebedynets, L. O. & Kalytovska, M. B. (2003) Adsorption of cadmium on acid-modified Transcarpathian clinoptilolite, Microporous and Mesoporous Materials, 60, 183–196.Google Scholar
Waterland, R. A. (1995) Cyanide – dispelling the myths: Homestake's bio-treatment. Mining Environmental Management, June 1995, 12–13.Google Scholar
Webb, M. (1996) Synthetic clay anion exchangers: their structure, modification and application in removing colour and toxins from textile process waters. Pp. 135–142 in: Ion Exchange Developments and Applications (Greig, J.A., editor). Society of Chemical Industry, London.Google Scholar
Yarar, B. (2001) Cyanides in the environment and their long-term fate. Proceedings of 17th International Mining Congress and Exhibition of Turkey – IMCET, 85–93.Google Scholar
Yazıcı, E.Y., Deveci, H. & Alp, I. (2009) Treatment of cyanide effluents by oxidation and adsorption in batch and column studies. Journal of Hazardous Materials, 166, 1362–1366.CrossRefGoogle ScholarPubMed
Young, C. A. & Jordan, T. S. (1995) Cyanide remediation: Current and past technologies. Proceedings of the 10th Annual Conference on Hazardous Waste Research, 104–129.Google Scholar
Zimmerman, A.R., Kang, D., Ahn, M., Hyun, S. & Banks, M. K. (2008) Influence of a soil enzyme on ironcyanide complex speciation and mineral adsorption. Chemosphere, 70, 1044–1051.Google Scholar