Singularly perturbed ordinary differential equations often exhibit Stokes’ phenomenon, which describes the appearance and disappearance of oscillating exponentially small terms across curves in the complex plane known as Stokes lines. These curves originate at singular points in the leading-order solution to the differential equation. In many important problems, it is impossible to obtain a closed-form expression for these leading-order solutions, and it is therefore challenging to locate these singular points. We present evidence that the analytic leading-order solution of a linear differential equation can be replaced with a numerical rational approximation using the adaptive Antoulas–Anderson (AAA) method. Despite such an approximation having completely different singularity types and locations, we show that the subsequent exponential asymptotic analysis accurately predicts the exponentially small behaviour present in the solution. For sufficiently small values of the asymptotic parameter, this approach breaks down; however, the range of validity may be extended by increasing the number of poles in the rational approximation. We present a related nonlinear problem and discuss the challenges that arise due to nonlinear effects. Overall, our approach allows for the study of exponentially small asymptotic effects without requiring an exact analytic form for the leading-order solution; this permits exponential asymptotic methods to be used in a much wider range of applications.

Tissues form from collections of cells that interact together mechanically via cell-to-cell adhesion, mediated by transmembrane cell adhesion molecules. Under a sufficiently large amount of induced stress, these tissues can undergo elastic deformation in the direction of tension, where they then elongate without any topological changes, and experience plastic deformation within the tissue. In this work, we present a novel mathematical model describing the deformation of cells, where tissues are elongated in a controlled manner. In doing so, the cells are able to undergo remodelling through elastic and then plastic deformation, in accordance with experimental observation. Our model describes bistable sizes of a cell that actively deform under stress to elongate the cell. In the absence of remodelling, the model reduces to the standard linear interaction model. In the presence of instant remodelling, we provide a bifurcation analysis to describe the existence of the bistable cell sizes. In the case of general remodelling, we show numerically that cells within a tissue may populate both the initial and elongated cell sizes, following a sufficiently large degree of stress.

A viscous fluid is confined between two smooth horizontal walls, in a vertical channel. The upper wall may move with constant speed, but the lower wall is stationary and a portion of it is heated. A plume of heated fluid develops, and may also be swept downstream by the motion of the upper wall. When the heating effect is small and the upper plate does not move, a closed-form solution for the temperature profile is presented. A numerical spectral method is then presented, and allows highly accurate nonlinear solutions to be obtained, for the temperature and the fluid motion. These are compared against the closed-form solution in the linearized case, and the effects of nonlinearity on temperature and velocity are revealed. The results also show that periodic plume shedding from the heated region can occur in the nonlinear case.

The Hamiltonian of a conventional quantum system is Hermitian, which ensures real spectra of the Hamiltonian and unitary evolution of the system. However, real spectra are just the necessary conditions for a Hamiltonian to be Hermitian. In this paper, we discuss the metric operators for pseudo-Hermitian Hamiltonian which is similar to its adjoint. We first present some properties of the metric operators for pseudo-Hermitian Hamiltonians and obtain a sufficient and necessary condition for an invertible operator to be a metric operator for a given pseudo-Hermitian Hamiltonian. When the pseudo-Hermitian Hamiltonian has real spectra, we provide a new method such that any given metric operator can be transformed into the same positive-definite one and the new inner product with respect to the positive-definite metric operator is well defined. Finally, we illustrate the results obtained with an example.

Mathematical modelling of microwaves travelling through bauxite ore provides a way to compute moisture content in the free space transmission method given data on signal attenuation, phase shift and variable bauxite depth. We extend a recently developed four-layer model that uses coupled ordinary differential wave equations for the electric field together with continuity boundary conditions at interfaces between ore, air and antenna to find a solution that incorporates multiple internal reflections in ore and air. The model provides good fits to data, depending on ore permittivity and conductivity.

Our extensions are to use effective medium models to obtain electromagnetic properties of the ore mixture from moisture content and to incorporate the damping effects of scattering from the ore surface. Our model leads to a formula for the received signal showing how signal strengths SS and phase shifts depend on the moisture content of the bauxite ore, through the effects of moisture on permittivity and conductivity. We show that SS may be noninvertible, indicating that attenuation data alone cannot be used to infer moisture content. Combining with phase data typically corrects the noninvertibility. Reducing the operating frequency dramatically improves the usefulness of signal strength data for inferring moisture content.

Double-masking may be used to reduce the transmission of a virus. If additionally the masks are compressible, with different permeabilities and behaviour under compression, then it may be possible to design a mask that allows for easy breathing under normal breathing conditions, but is relatively impermeable under coughing or sneezing conditions. Such a mask could be both comfortable to wear and effective. We obtain analytical solutions for the steady-state flow-through behaviour of such a double mask under flow-out conditions. The results show that the reduction in permeability required to produce a relatively impermeable mask under high flux expulsion (sneezing) conditions could be achieved using either a single filter compressible mask or two filters with different poroelastic parameters. The parameters can be more easily adjusted using a double mask. For both single- and double-mask cases, there is an abrupt cut off, whereby through-flux levels reduce from a maximum value to zero as pressure drop levels increase beyond a critical value. Additionally, in the double-mask case, there exists a second steady-state solution for particular parameter ranges. This second solution is unlikely to occur under normal circumstances.

This paper examines the issue of derivative pricing within the framework of a fractional stochastic volatility model. We present a deterministic partial differential equation system to derive an approximate expression for the derivative price. The proposed approach allows for the stochastic volatility to be expressed as a composition of deterministic functions of time and a fractional Ornstein–Uhlenbeck process. We apply this method to the European option pricing under the fractional Stein–Stein volatility model, demonstrating its feasibility and reliability through numerical simulations. Our numerical simulations also illustrate the impact of the parameters in the fractional stochastic volatility model on the option price.

We consider planar flow involving two viscous fluids in a porous medium. One fluid is injected through a line source at the origin and moves radially outwards, pushing the second, ambient fluid outwards. There is an interface between the two fluids and if the inner injected fluid is of lower viscosity, the interface is unstable to small disturbances and radially directed unstable Saffman–Taylor fingers are produced. A linearized theory is presented and is compared with nonlinear results obtained using a numerical spectral method. An additional theory is also discussed, in which the sharp interface is replaced with a narrow diffuse interfacial region. We show that the nonlinear results are in close agreement with the linearized theory for small-amplitude disturbances at early times, but that large-amplitude fingers develop at later times and can even detach completely from the initial injection region.

Designing a reasonable M/G/1 retrial queue system that enhances service efficiency and reduces energy consumption is a challenging issue in Information and Communication Technology systems. This paper presents an M/G/1 retrial queue system incorporating random working vacation (RWV) and improved service efficiency during vacation (ISEV) policies, and examines its optimal queuing strategies. The RWV policy suggests that the server takes random working vacations during reserved idle periods, effectively reducing energy consumption. In contrast, the ISEV policy strives to augment service efficiency during regular working periods by updating, inspecting or maintaining the server on vacations. The system is transformed into a Cauchy problem to investigate its well-posedness and stability, employing operator semigroup theory. Based on the system’s stability, steady-state performance measures, such as service efficiency, energy consumption and expected costs, are quantified using the steady-state solution. The paper subsequently demonstrates the existence of optimal queuing strategies that achieve maximum efficiency and minimum expected costs. Finally, two numerical experiments are provided to illustrate the effectiveness of the system.

Thin spray-on liners (TSLs) have been found to be effective for structurally supporting the walls of mining tunnels and thus reducing the occurrence of rock bursts, an effect primarily due to the penetration of cracks by the liner. Surface tension effects are thus important. However, TSLs are also used to simply stabilize rock surfaces, for example, to prevent rock fall, and in this context crack penetration is desirable but not necessary, and the tensile and shearing strength and adhesive properties of the liner determine its effectiveness. We examine the effectiveness of nonpenetrating TSLs in a global lined tunnel and in a local rock support context. In the tunnel context, we examine the effect of the liner on the stress distribution in a tunnel subjected to a geological or mining event. We show that the liner has little effect on stresses in the surrounding rock and that tensile stresses in the rock surface are transmitted across the liner, so that failure is likely to be due to liner rupture or detachment from the surface. In the local rock support context, loose rock movements are shown to be better achieved using a liner with small Young’s modulus, but high rupture strength.

A nonlinear evolution equation correct to fourth order is developed for gravity-capillary waves on linear shear currents in finite water depth. Therefore, this equation covers both effects of depth uniform currents and uniform vorticity. Starting from this equation, an instability analysis is then made for narrow banded uniform Stokes waves. The notable feature is that our investigation due to fourth order shows a remarkable improvement compared with the third-order one, and produces an excellent result compatible with the exact result of Longuet-Higgins. We observe that linear shear currents considerably change the modulational instability properties of capillary-gravity waves, such as the growth rate and bandwidth of instability.

In this paper, we investigate the thermal evolution in a one-dimensional bagasse stockpile. The mathematical model involves four unknowns: the temperature, oxygen content, liquid water content and water vapour content. We first nondimensionalize the model to identify dominant terms and so simplify the system. We then calculate solutions for the approximate and full system. It is shown that under certain conditions spontaneous combustion will occur. Most importantly, we show that spontaneous combustion can be avoided by sequential building. To be specific, in a situation where, say, a $4.7\,$m stockpile can spontaneously combust, we could construct a $3\,$m pile and then some days later add another $1.7\,$m to produce a stable $4.7\,$m pile.

Based on biochemical kinetics, a stochastic model to characterize wastewater treatment plants and dynamics of river water quality under the influence of random fluctuations is proposed in this paper. This model describes the interaction between dissolved oxygen (DO) and biochemical oxygen demand (BOD), and is in the form of stochastic differential equations driven by multiplicative Gaussian noises. The stochastic persistence problem for the model of the system is analysed. Further, a numerical simulation of the stationary probability distributions of BOD and OD by approximations of the stochastic process solution is presented. These results have implications for the prediction and control of pollutants.

We provide an analytic solution of the Rössler equations based on the asymptotic limit $c\to \infty $ and we show in this limit that the solution takes the form of multiple pulses, similar to “burst” firing of neurons. We are able to derive an approximate Poincaré map for the solutions, which compares reasonably with a numerically derived map.