Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
White, D. J.
1967.
Fatigue Strength of Small Pinned Connections Made from Alloy Steel Fv 520B.
Proceedings of the Institution of Mechanical Engineers,
Vol. 182,
Issue. 1,
p.
615.
White, D. J.
1968.
The Fatigue Strength of Large Single-Pinned and Double-Pinned Connections Made from Alloy Steel FV520B.
Proceedings of the Institution of Mechanical Engineers,
Vol. 183,
Issue. 1,
p.
563.
Gregory, R. D
1968.
Stress concentration around a loaded bolt in an axially loaded bar.
Mathematical Proceedings of the Cambridge Philosophical Society,
Vol. 64,
Issue. 4,
p.
1215.
Margetson, J.
and
Morland, L.W.
1970.
Separation of smooth circular inclusions from elastic and viscoelastic plates subjected to uniaxial tension.
Journal of the Mechanics and Physics of Solids,
Vol. 18,
Issue. 4,
p.
295.
White, D. J.
1970.
Effect of Pins with Flats and Resin-Bonded Polytetrafluorethylene Coatings on the Fatigue Strength of Large Pinned Connections Made from Alloy Steel FV520B.
Proceedings of the Institution of Mechanical Engineers,
Vol. 185,
Issue. 1,
p.
709.
Cartwright, D. J.
and
Ratcliffe, G. A.
1972.
Strain energy release rate for radial cracks emanating from a pin loaded hole.
International Journal of Fracture Mechanics,
Vol. 8,
Issue. 2,
p.
175.
Cartwright, D. J.
and
Ratcliffe, G. A.
1972.
Strain energy release rate for radial cracks emanating from a pin loaded hole.
International Journal of Fracture Mechanics,
Vol. 8,
Issue. 2,
p.
175.
Rao, A.K.
Eshwar, V.A.
and
Dattaguru, B.
1977.
A comprehensive study of interference and clearance fit pins in large plates.
Mechanics Research Communications,
Vol. 4,
Issue. 5,
p.
325.
Rao, A.K.
1978.
Elastic analysis of pin joints.
Computers & Structures,
Vol. 9,
Issue. 2,
p.
125.
Ghosh, S. P.
Dattaguru, B.
and
Rao, A. K.
1981.
Load transfer from a smooth elastic pin to a large sheet.
AIAA Journal,
Vol. 19,
Issue. 5,
p.
619.
Ghosh, S. P.
Dattaguru, B.
and
Rao, A. K.
1982.
Photoelastic studies on progress of separation in interference fits.
Experimental Mechanics,
Vol. 22,
Issue. 1,
p.
8.
Choo, Y.S.
Choi, K.C.
and
Lee, K.H.
1993.
The effects of eyebar shape and pin/hole tolerance on its ultimate strength.
Journal of Constructional Steel Research,
Vol. 26,
Issue. 2-3,
p.
153.
MURUGESHAN, P.
PADHI, D.
SRIDHAR, M.K.
and
RAJU, K.N.
1994.
Advances in Fracture Resistance and Structural Integrity.
p.
657.
Liu, S.B.
and
Tan, C.L.
1994.
Boundary element contact mechanics analysis of pin-loaded lugs.
Computers & Structures,
Vol. 53,
Issue. 3,
p.
653.
Ohashi, Harukazu
Miki, Chitoshi
and
Ono, Shuichi
1997.
CONTACT PROBLEMS AND STRESS DISTRIBUTION OF A PIN-CONNECTION DETAIL.
Doboku Gakkai Ronbunshu,
Vol. 1997,
Issue. 570,
p.
33.
Ho, K.C.
and
Chau, K.T.
1997.
An infinite plane loaded by a rivet of a different material.
International Journal of Solids and Structures,
Vol. 34,
Issue. 19,
p.
2477.
Ahmad, I
and
Stanley, P
2000.
Deformations and stresses in pin-loaded tubes under axial tension.
The Journal of Strain Analysis for Engineering Design,
Vol. 35,
Issue. 5,
p.
329.
McNee, K.R
Greenwood, G.W
and
Jones, H
2002.
The effect of stress orientation on the formation of precipitate free zones during low stress creep.
Scripta Materialia,
Vol. 46,
Issue. 6,
p.
437.
Ahmed, Aslam
Sekhon, Gurusaran
Kumar, Rakesh
and
Palanichamy, Muthiah
2002.
Elastic Analysis of A Pin Loaded Lug.
Aslam, A.
Sekhon, G. S.
and
Kumar, R.
2004.
Elastic Analysis of A Pin Loaded Lug.
Journal of Aircraft,
Vol. 41,
Issue. 2,
p.
365.