Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-28T21:12:02.371Z Has data issue: false hasContentIssue false
  • English
  • Français

Asymmetric Vortex Formation from Cones at Incidence – a Simple Inviscid Model

Published online by Cambridge University Press:  07 June 2016

D.E. Dyer ,
S.P. Fiddes  and
J.H.B. Smith
D.E. Dyer
Affiliation:
procurement Executive, Ministry of Defence, Farnborough, Hants
S.P. Fiddes
Affiliation:
procurement Executive, Ministry of Defence, Farnborough, Hants
J.H.B. Smith
Affiliation:
procurement Executive, Ministry of Defence, Farnborough, Hants
Get access

Summary

An inviscid model, originally proposed by Bryson to describe the formation of laterally-symmetric vortices above bodies of revolution at large angles of incidence, is extended to describe flows without lateral symmetry. Each vortex is represented by a single line-vortex and conditions of cross-flow stagnation are applied at the postulated separation lines. The transverse component of the force acting on each vortex is balanced by an equal and opposite force acting on the cut connecting it to the adjacent separation line. It is shown that this model allows asymmetrical vortices to form in the flow over slender circular cones even when the separation lines are disposed symmetrically.

Type
Research Article
Information
Aeronautical Quarterly , Volume 33 , Issue 4 , November 1982 , pp. 293 - 312
Copyright
Copyright © Royal Aeronautical Society. 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Hunt, B.L. and Dexter, P.C. Pressures on a slender body at high angle of attack in a very low turbulence level air stream. Paper 17, High Angle of Attack Aerodynamics, AGARD-CP-247, 1978 Google Scholar
2 Keener, E.R., Chapman, G.T., Cohen, L. and Taleghani, J. Side forces on a tangent ogive forebody with a fineness ratio of 3.5 at high angles of attack and Mach numbers from 0.1 to 0.7. NASA TM X-3437, 1977 Google Scholar
3 Ericsson, L.E. and Reding, J.P. Vortex-induced asymmetric loads on slender vehicles. Lockheed Missiles and Space Company Report D 630807, 1979 Google Scholar
4 Maltby, R.L. and Peckham, D.H. Low speed flow studies of the vortex patterns above inclined slender bodies using a new smoke technique. RAE Technical Note Aero 2482, 1957 Google Scholar
5 Bird, J.D. Tuft-grid surveys at low speeds for delta wings. NASA TN D-5045, 1969 Google Scholar
6 Keener, E.R. and Chapman, G.T. Similarity in vortex asymmetries over slender bodies and wings. AIAA Jour., Vol 15, 9, pp 1370-2, 1977 CrossRefGoogle Scholar
7 Schwind, R.G. and Mullen, J. Jnr., Laser-velocimeter measurements of slender-body wake vortices. AIAA Paper 79-0302, 1979 CrossRefGoogle Scholar
8 Fiddes, S.P. A theory of the separated flow past a slender elliptic cone at incidence. Paper 30, Computation of Viscous-Inviscid Interactions, AGARD-CP-291, 1980 Google Scholar
9 Bryson, A.E. Symmetrical vortex separation on circular cylinders and cones. J. Appl. Mech. (ASME), Vol 26, pp 643-8, 1959 CrossRefGoogle Scholar
10 Peake, D.J., Owen, F.K. and Higuchi, H. Symmetrical and asymmetrical separations about a yawed cone. Paper 16, High Angle of Attack Aerodynamics, AGARD-CP-247, 1978 Google Scholar
11 Fidler, J.E. Active control of asymmetric vortex effects. J. Aircraft, Vol 18, 4, pp 267-72, 1981 CrossRefGoogle Scholar
12 Smith, J.H.B. Inviscid fluid models, based on rolled-up vortex sheets, for three-dimensional separation at high Reynolds number. Paper 9, Three-Dimensional and Unsteady Flow Separation at High Reynolds Numbers, AGARD-LS-94, 1978 Google Scholar
13 Moore, Katherine Line-vortex models of separated flow past a circular cone at incidence. RAE Technical Memorandum Aero 1917, 1981 Google Scholar
14 Keener, E.R., Chapman, G.T., Cohen, L. and Taleghani, J.T. Side-forces on fore-bodies at high angles of attack and Mach numbers from 0.1 to 0.7; two tangent ogives, paraboloid and cone. NASA TM X-3438, 1977 Google Scholar
15 Cercignani, C. Bifurcation problems in fluid mechanics. Meccanica Vol. 5, pp 7-16, 1970 CrossRefGoogle Scholar
16 Brown, K.M. Computer oriented algorithms for solving systems of simultaneous nonlinear algebraic equations. Numerical Solution of Systems of Nonlinear Algebraic Equations, edited by Byrne, G.D. and Hall, C.A., Academic Press, 1973 Google Scholar