Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-03T08:37:05.216Z Has data issue: false hasContentIssue false

An Inviscid-Viscous Interaction Method to Predict the Blade-to-Blade Performance of Axial Compressors

Published online by Cambridge University Press:  07 June 2016

W.J. Calvert
Affiliation:
National Gas Turbine Establishment, Pyestook
M.V. Herbert
Affiliation:
National Gas Turbine Establishment, Pyestook
Get access

Summary

An inviscid-viscous interaction method has been developed to predict the blade-to-blade flow in axial compressors. The method is primarily intended for high deflection, transonic (but substantially shock-free) blades where the suction surface boundary layer may be separated near the trailing edge. The inviscid flow is calculated by a time marching method and the viscous flow by integral methods for laminar and turbulent boundary layers. A mixing calculation is then carried out to determine the blade deviation angle and pressure loss coefficient. Predictions have been compared with test results for three high deflection, transonic cascades and there is generally good agreement.

Type
Research Article
Copyright
Copyright © Royal Aeronautical Society. 1980

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Wu, C.H., A general theory of the three-dimensional flow in subsonic and supersonic turbomachines of axial, radial and mixed flow types, NASA TN 2604, 1952.Google Scholar
2 Marsh, H., A digital computer program for the throughflow fluid mechanics in an arbitrary turbomachine, using a matrix method, ARC RSM 3509, 1968.Google Scholar
3 Novak, R.A., Streamline curvature computing procedures for fluid-flow problems, J. Eng. for Power, Trans. ASME Ser. A, 89, pp 478490, 1967.CrossRefGoogle Scholar
4 Hirsch, C., Finite element method for through-flow calculations, AGARD CP 195, 1976.Google Scholar
5 Calvert, W.J. and Smith, D.J.L., A digital computer program for the subsonic flow past turbomachine blades using a matrix method, ARC RSM 3838, 1976.Google Scholar
6 Frost, D.H. and Smith, D.J.L., A streamline curvature computer program for analysing the subsonic compressible flow past a cascade of aerofoils, NGTE Report R.327, ARC Paper no. 35346, 1973.Google Scholar
7 Hansen, E.C.,, Serovy, G.K. and Sockol, P.M., Axial-flow compressor turning angle and loss by inviscid-viscous interaction blade-to-blade computation. ASME Paper 79-GT-5, 1979.Google Scholar
8 Denton, J.D., A time marching method for two and three dimensional blade-to-blade flows. ARC RSM 3775, 1974.Google Scholar
9 Denton, J.D. and Singh, U.K., Time marching methods for turbomachine flow calculation, VKI Lecture SeriesApplications of numerical methods to flow calculations in turbo-machines”, 1979.Google Scholar
10 Bryce, J.D. and Litchfield, M.R., Experience of the Denton blade-to-blade time marching computer programs, ARC CP 1373, 1977.Google Scholar
11 Green, J.E.,, Weeks, D.J. and Brooman, J.W.F., Prediction of turbulent boundary layers and wakes in compressible flow by a lag-entrainment method. ARC R&M 3771, 1977.Google Scholar
12 East, L.F.,, Smith, P.D. and Merryman, P.J., Prediction of the development of separated turbulent boundary layers by the lag-entrainment method. RAE Technical Report TR. 77046, ARC Paper no. 37435, 1977.Google Scholar
13 Curle, N., The laminar boundary layer equations, Oxford, 1962, p. 45 et seq.Google Scholar
14 Dunham, J., Predictions of boundary layer transition on turbomachinery blades, AGARD AG 164, 1972.Google Scholar
15 Stewart, W.L., Analysis of two-dimensional compressible flow loss characteristics downstream of turbomachine blade rows in terms of basic boundary layer characteristics, NACA TN 3515, 1955.Google Scholar
16 Stewart, W.L., Private communication, Messrs Rolls-Royce Ltd, 1978.Google Scholar
17 Stewart, W.L., Turbine and compressor cascade test cases, VKI Lecture Series 84, “Transonic flows in axial turbomachinery”, 1976.Google Scholar
18 Lieblein, S., Experimental flow in two-dimensional cascades, Chapter VI, NASA SP-36, 1965.Google Scholar